Ercan Yuksel 
- (2024): Large-scale cushion type bare and partially rubber filled mechanical couplers subjected to uniaxial cyclic loading. In: Engineering Structures, v. 302 (March 2024).
- (2023): State-of-the-art review for lead extrusion dampers: development, improvement, characteristics, application areas, and research needs. In: Structures, v. 58 (December 2023).
- (2023): Investigation of the Effect of Reinforcement Type on the Flexural Performance of Slab Tracks. In: Journal of Transportation Engineering, Part A: Systems, v. 149, n. 6 (June 2023).
- (2019): An improved input energy spectrum verified by the shake table tests. In: Earthquake Engineering and Structural Dynamics, v. 48, n. 1 (January 2019).
- (2023): Development and experimental validation of finite element models for a prestressed lead extrusion damper. In: Structures, v. 50 (April 2023).
- (2022): Vision-Based Dynamic Response Measurements of Structures by Using Smartphone Videos and Alternative Techniques. In: International Journal of Structural Stability and Dynamics, v. 23, n. 7 (November 2022).
- (2023): Estimation of the story response parameters through the seismic input energy for moment-resisting frames. In: Soil Dynamics and Earthquake Engineering, v. 164 (January 2023).
- (2022): Development of a novel fuse type mechanical connector. In: Structures, v. 44 (October 2022).
- (2022): Closed-Form Demonstration and Shake Table Verification of Damping Effect on the Seismic Energy. In: International Journal of Structural Stability and Dynamics, v. 22, n. 12 (May 2022).
- (2021): Improvement of seismic performance of precast frames with cladding panels fastened by energy dissipative steel cushions. In: Bulletin of Earthquake Engineering, v. 19, n. 12 (July 2021).
- (2021): Rapid and Easily Applicable Procedure for Full-Scale Laboratory Tests of Ballastless Slab Tracks. In: Journal of Transportation Engineering, Part A: Systems, v. 147, n. 9 (September 2021).
- (2021): Damping effect on seismic input energy and its verification by shake table tests. In: Advances in Structural Engineering, v. 24, n. 12 (May 2021).
- (2021): Seismic design of RC frame structures based on energy-balance method. In: Engineering Structures, v. 237 (June 2021).
- (2007): Local thin jacketing for the retrofitting of reinforced concrete columns. In: Structural Engineering and Mechanics, v. 27, n. 5 (November 2007).
- (2021): Experimental investigation and pseudoelastic truss model for in-plane behavior of corrugated sandwich panels with polyurethane foam core. In: Structures, v. 29 (February 2021).
- (2020): Seismic performance improvement of single-storey precast reinforced concrete industrial buildings in use. In: Soil Dynamics and Earthquake Engineering, v. 135 (August 2020).
- (2017): Spring tube braces for seismic isolation of buildings. In: Earthquake Engineering and Engineering Vibration, v. 16, n. 1 (January 2017).
- (2018): Development and Cyclic Behavior of U-Shaped Steel Dampers with Perforated and Nonparallel Arm Configurations. In: International Journal of Steel Structures, v. 18, n. 5 ( 2018).
- (2008): Estimation of the Fundamental Vibration Period of Existing RC Buildings in Turkey Utilizing Ambient Vibration Records. In: Journal of Earthquake Engineering, v. 12, n. 1 ( 2008).
- (2019): Numerical Modelling of Energy Dissipative Steel Cushions. In: International Journal of Steel Structures, v. 19, n. 4 ( 2019).
- (2019): Cyclic behavior of reinforced concrete cladding panels connected with energy dissipative steel cushions. In: Engineering Structures, v. 189 (June 2019).
- (2011): Characteristics of CFRP retrofitted hollow brick infill walls of reinforced concrete frames. In: Construction and Building Materials, v. 25, n. 10 (October 2011).
- (2015): Seismic behavior of two exterior beam–column connections made of normal-strength concrete developed for precast construction. In: Engineering Structures, v. 99 (September 2015).
- (2017): Retrofitting of pinned beam–column connections in RC precast frames using lead extrusion dampers. In: Bulletin of Earthquake Engineering, v. 16, n. 3 (October 2017).
- (2017): Behaviour of steel cushions subjected to combined actions. In: Bulletin of Earthquake Engineering, v. 16, n. 2 (September 2017).
- (2017): 01.24: Moment-resisting beam-to-column connections of corrugated web I sections. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2017): 11.50: Modelling hysteretic behaviour of U-shaped steel dampers. In: ce/papers, v. 1, n. 2-3 (September 2017).
Structurae cooperates with
