Qiang Yuan 
- (2024): Effect of accelerators on the long-term performance of shotcrete and its improvement strategies: A review. In: Journal of Building Engineering, v. 89 (July 2024).
- (2024): Confined water redistribution governs nanomechanical property changes of cement pastes curing at different air pressures. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Effect of coarse aggregate on printability and mechanical properties of 3D printed concrete. In: Construction and Building Materials, v. 405 (November 2023).
- (2023): Comparative analysis and modification of evaluation methods for the pozzolanic reactivity of natural volcanic powders. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Effects of dissolved oxygen on marine biofilm formation and its on microstructure and chloride ion permeability of concrete. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): An approach to improve the reactivity of basic oxygen furnace slag: Accelerated carbonation and the combined use of metakaolin. In: Construction and Building Materials, v. 379 (May 2023).
- (2023): Bonding performance between distinct layers of cast-in-situ self-compacting concrete and ordinary concrete. In: Construction and Building Materials, v. 373 (April 2023).
- (2022): Effects of water to binder ratio on the chloride binding behaviour of artificial seawater cement paste blended with metakaolin and silica fume. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Comparative study on the early properties of cement modified with different ionic polyacrylamides. In: Construction and Building Materials, v. 339 (July 2022).
- (2022): Effect of roughness on bonding performance between Portland cement concrete and magnesium phosphate cement concrete. In: Construction and Building Materials, v. 323 (March 2022).
- (2021): Change in fresh properties of high-strength concrete due to pumping. In: Construction and Building Materials, v. 300 (September 2021).
- (2019): Effects of chemical and mineral admixtures on the foam indexes of cement-based materials. In: Case Studies in Construction Materials, v. 11 (December 2019).
- (2021): Air entrainment in fresh concrete and its effects on hardened concrete-a review. In: Construction and Building Materials, v. 274 (March 2021).
- (2021): Determination of sulfate content in OPC and CSA cement by sodium carbonate extraction method. In: Construction and Building Materials, v. 274 (March 2021).
- (2020): Early-age deformation of cement emulsified asphalt mortar with aluminum powder and expansive agent. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Durability of ultra-high performance concrete – A review. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Comparative study on the new-old mortar interface deterioration after wet-dry cycles and heat-cool cycles. In: Construction and Building Materials, v. 244 (May 2020).
- (2018): Effect of mineral admixtures on the structural build-up of cement paste. In: Construction and Building Materials, v. 160 (January 2018).
- (2020): An amendment of rotation speed-torque transformation equation for the Herschel-Bulkley model in wide-gap coaxial cylinders rheometer. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): A feasible method for measuring the buildability of fresh 3D printing mortar. In: Construction and Building Materials, v. 227 (December 2019).
- (2019): Degradation of mechanical properties of CA mortar caused by calcium leaching. In: Construction and Building Materials, v. 208 (May 2019).
- (2019): Effects of rotational shearing on rheological behavior of fresh mortar with short glass fiber. In: Construction and Building Materials, v. 203 (April 2019).
- (2016): Characterization of Cement Asphalt Mortar for Slab Track by Dynamic Mechanical Thermoanalysis. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 3 (March 2016).
- (2009): Chloride binding of cement-based materials subjected to external chloride environment – A review. In: Construction and Building Materials, v. 23, n. 1 (January 2009).
- (2012): AgNO3-based colorimetric methods for measurement of chloride penetration in concrete. In: Construction and Building Materials, v. 26 (January 2012).
- (2014): Dynamic mechanical properties of cement and asphalt mortar based on SHPB test. In: Construction and Building Materials, v. 70 (November 2014).
- (2017): Estimation of elastic modulus of cement asphalt binder with high content of asphalt. In: Construction and Building Materials, v. 133 (February 2017).
- (2019): Effect of water absorption of SAP on the rheological properties of cement-based materials with ultra-low w/b ratio. In: Construction and Building Materials, v. 195 (January 2019).
- (2018): Calcium Leaching of Cement Asphalt Paste and Its Effects on Dynamic Mechanical Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 7 (July 2018).
- (2017): Effect of Mix Parameters on the Dynamic Mechanical Properties of Cement Asphalt Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 8 (August 2017).
Structurae cooperates with
