Qijun Yu 
- (2025): Degradation of typical synthesized reaction products in slag-based geopolymers under sulfate attack. In: Construction and Building Materials, v. 461 (January 2025).
- (2025): Effect of short fibers on non-uniform strain distribution of geopolymer mortar under dry conditions. In: Construction and Building Materials, v. 459 (January 2025).
- (2024): Accelerated carbonation curing of biochar-cement mortar: Effects of biochar pyrolysis temperatures on carbon sequestration, mechanical properties and microstructure. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Broadband electromagnetic wave absorption cement-based composite using foam-loaded KH550@Fe3O4 nanoparticles. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Effects of silica fume/ultrafine fly ash on the rheology and hardening of alkali-activated slag-waste ceramic powder paste. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Enhancing electromagnetic wave absorption and flexural properties in carbon fiber-reinforced foamed cement-based composites. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Chloride adsorption of synthetic individual reaction products in alkali-activated fly ash. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Effect of ultrafine recycled brick powder on the properties of blended cement: Hydration kinetics, microstructure evolution and properties development. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Effects of recycled concrete powders on the rheology, setting and early age strength of cement paste. In: Construction and Building Materials, v. 401 (October 2023).
- (2024): Evaluation of tensile properties and cracking potential evolution of fly ash-cement mortar at early age based on digital image correlation method. In: Construction and Building Materials, v. 412 (January 2024).
- (2019): Effects of external multi-ions and wet-dry cycles in a marine environment on autogenous self-healing of cracks in cement paste. In: Cement and Concrete Research, v. 120 (June 2019).
- (2019): Development of the strain field along the crack in ultra-high-performance fiber-reinforced concrete (UHPFRC) under bending by digital image correlation technique. In: Cement and Concrete Research, v. 125 (November 2019).
- (2022): Characterizing the effects of Al(OH)3 and Mg(OH)2 on reaction products and drying shrinkage characteristics of alkali-activated slag. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): The chloride binding capacity and stability of gap-graded blended cement with calcined hydrotalcite and metakaolin. In: Journal of Building Engineering, v. 49 (May 2022).
- (2022): Clarifying the deformation restriction of unhydrated phase in cement paste to its autogenous shrinkage. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): Corrosion inhibition effect of zeolitic imidazolate framework in chloride-contaminated cement pore solution under elevated temperatures. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Effects of Mg on the mineralogy and micro-mechanical properties of CaO-SiO2-H2O systems under autoclaved conditions. In: Construction and Building Materials, v. 342 (August 2022).
- (1997): The Effect Of A Newly Developed Hardening Accelerator On The Properties Of Portland Blast-furnace Cement. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1997, n. 571 (August 1997).
- (2020): Effect of multiple ions on the degradation in concrete subjected to sulfate attack. In: Construction and Building Materials, v. 259 (October 2020).
- (2021): The effect of organic core–shell corrosion inhibitors on corrosion performance of the reinforcement in simulated concrete pore solution. In: Construction and Building Materials, v. 267 (January 2021).
- (2020): Design and preparation of double-layer structured cement-based composite with inspiring microwave absorbing property. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): Feasibility and corrosion inhibition efficacy of zeolite-supported lauric acid imidazoline as corrosion inhibitor in cementitious mortar. In: Construction and Building Materials, v. 250 (July 2020).
- (2019): Direct synthesis of carbon nanotubes on fly ash particles to produce carbon nanotubes/fly ash composites. In: Frontiers of Structural and Civil Engineering, v. 13, n. 6 (October 2019).
- (2019): Difference in the reaction process of slag activated by waterglass solution and NaOH solution. In: Structural Concrete, v. 20, n. 5 (October 2019).
- (2019): Evaluation on the acidification damage of the external anode mortar induced by impressed current cathodic protection. In: Construction and Building Materials, v. 229 (December 2019).
- (2019): Evaluation of inherent factors on flowability, cohesiveness and strength of cementitious mortar in presence of zeolite powder. In: Construction and Building Materials, v. 214 (July 2019).
- (2011): Effects of size fraction on composition and fundamental properties of Portland cement. In: Construction and Building Materials, v. 25, n. 7 (July 2011).
- (2014): Characterization of reaction products and reaction process of MgO–SiO2–H2O system at room temperature. In: Construction and Building Materials, v. 61 (June 2014).
- (2017): Enhanced mechanical properties of cement paste by hybrid graphene oxide/carbon nanotubes. In: Construction and Building Materials, v. 134 (March 2017).
- (2017): Evaluating the distance between particles in fresh cement paste based on the yield stress and particle size. In: Construction and Building Materials, v. 142 (July 2017).
Structurae cooperates with
