Peng Yu 
- (2024): A multi-scale modeling method for tensile properties of strain-hardening cementitious composites. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Influence of different cement matrix on the static and dynamic mechanical properties of Ultra-High Performance Concrete. In: Journal of Building Engineering, v. 98 (December 2024).
- (2025): Investigation on the new bolt-welded joint of concrete-encased CFST under eccentric compression. In: Structures, v. 72 (February 2025).
- (2025): Dispersion and stability evaluation of water-washed MSWI fly ash under mechanochemical treatment. In: Construction and Building Materials, v. 465 (February 2025).
- (2025): Durability and heavy metals long-term stability of alkali-activated sintered municipal solid waste incineration fly ash concrete in acidic environments. In: Construction and Building Materials, v. 462 (February 2025).
- (2025): Experimental Study and a 3D Compression Model on the Compressibility of Saline Clayey Sand. In: International Journal of Geomechanics, v. 25, n. 2 (February 2025).
- (2024): Improved adaptive robust control of direct-drive pump-valve cooperative brake-by-wire unit with disturbance compensation. In: Smart Materials and Structures, v. 33, n. 12 (4 November 2024).
- (2024): Impact of urbanization on heavy metals in outdoor air and risk assessment: A case study in severe cold regions. In: Sustainable Cities and Society, v. 114 (November 2024).
- (2024): Investigation on a type of the beam flange opening design appropriated for the steel joint with the external diaphragm under seismic condition. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Eccentric compression capacity of bolt-welded joints in concrete-encased CFST. In: Structures, v. 63 (May 2024).
- (2024): Investigation on shear properties and mechanical model of FRP-ECC-concrete composite interface cast with 3D-printing pre-grooves. In: Structures, v. 64 (June 2024).
- (2024): Mechanical properties and durability of alkali-activated fly ash-municipal sludge concrete. In: Construction and Building Materials, v. 419 (March 2024).
- (2024): Low-frequency band gap design of acoustic metamaterial based on cochlear structure. In: Smart Materials and Structures, v. 33, n. 2 (4 January 2024).
- (2024): A mesoscale model for multiple cracking behavior of strain-hardening cementitious composites. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Experimental and numerical analysis of wheeled medical equipment with adjacent wall subjected to earthquakes. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Mechanical properties of CFST column with bolt-welded joints under eccentric compression. In: Structures, v. 58 (December 2023).
- (2023): Effectiveness of flange plates on torsional behaviors of ultra-high-performance fiber-reinforced concrete hollow beams. In: Developments in the Built Environment, v. 16 (December 2023).
- (2023): A Dynamic Patients Dispatch and Treatment Model for Resilience Evaluation of Interdependent Transportation-Healthcare System. In: Journal of Earthquake Engineering, v. 27, n. 16 (March 2023).
- (2022): The Investigation on Static Stability Analysis for Reticulated Shell with Initial Defect Value Using Stochastic Defect Mode Method. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Automated structural design of shear wall structures based on modified genetic algorithm and prior knowledge. In: Automation in Construction, v. 139 (July 2022).
- (2021): Investigation on the physical, mechanical and microstructural properties of epoxy polymer matrix with crumb rubber and short fibres for composite railway sleepers. In: Construction and Building Materials, v. 295 (August 2021).
- (2022): How to improve consumers’ travel intentions under the COVID-19 pandemic: An empirical study in China. In: International Journal of Sustainable Transportation, v. 17, n. 4 (February 2022).
- (2022): Behaviour of timber-alternative railway sleeper materials under five-point bending. In: Construction and Building Materials, v. 316 (January 2022).
- (2021): Effect of bending and compressive modulus of elasticity on the behaviour of timber-alternative railway sleepers supported by ballast. In: Case Studies in Construction Materials, v. 15 (December 2021).
- (2021): Joint Planning of a Distribution System and a Charging Network for Electric Vehicles. In: Journal of Energy Engineering, v. 147, n. 1 (February 2021).
- (2020): Damage-Plastic Constitutive Model of Thin-Walled Circular Steel Tubes for Space Structures. In: Journal of Engineering Mechanics (ASCE), v. 146, n. 12 (December 2020).
- (2020): A Developed Damage Constitutive Model for Circular Steel Tubes of Reticulated Shells. In: International Journal of Structural Stability and Dynamics, v. 20, n. 9 (August 2020).
- (2019): A Framework to Assess the Seismic Resilience of Urban Hospitals. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Modeling on the hydration and leaching of eco-friendly magnesium oxychloride cement paste at the micro-scale. In: Construction and Building Materials, v. 204 (April 2019).
- (2017): An experimental analysis of strontium titanate ceramic substrates polished by magnetorheological finishing with dynamic magnetic fields formed by rotating magnetic poles. In: Smart Materials and Structures, v. 26, n. 5 (May 2017).
Structurae cooperates with
