Jia Yu 
- (2024): Theoretical investigation of two ideal radiative cooling materials and radiative sky water-cooling module with ideal selective radiative materials. In: Energy and Buildings, v. 323 (November 2024).
- (2024): Prediction models for building thermal mass of intermittently heated rooms for balancing energy consumption and indoor thermal comfort. In: Energy and Buildings, v. 317 (August 2024).
- (2024): A simple method and prediction model for calculating the cooling load of impinging jet ventilation system in office buildings. In: Building and Environment, v. 254 (April 2024).
- (2023): Deep learning seismic damage assessment with embedded signal denoising considering three-dimensional time–frequency feature correlation. In: Engineering Structures, v. 286 (July 2023).
- (2023): Thermal fatigue and cracking behaviors of asphalt mixtures under different temperature variations. In: Construction and Building Materials, v. 369 (March 2023).
- (2022): Numerical investigation of the thermal and ventilation performance of a combined impinging jet ventilation and passive chilled beam system. In: Building and Environment, v. 226 (December 2022).
- (2022): Improved extreme learning machine-based dam deformation prediction considering the physical and hysteresis characteristics of the deformation sequence. In: Journal of Civil Structural Health Monitoring, v. 12, n. 5 (July 2022).
- (2022): Robust optimization of rolling parameters of coarse aggregates based on improved response surface method using satisfaction function method based on entropy and adaptive chaotic gray wolf optimization. In: Construction and Building Materials, v. 316 (January 2022).
- (2021): Simplified models for predicting thermal stratification in impinging jet ventilation rooms using multiple regression analysis. In: Building and Environment, v. 206 (December 2021).
- (2021): Development of a second-order dynamic model for quantifying impact of thermal mass on indoor thermal environment. In: Journal of Building Engineering, v. 42 (October 2021).
- (2021): Numerical study on thermal stratification for impinging jet ventilation system in office buildings. In: Building and Environment, v. 196 (June 2021).
- (2021): Imitation of imperial gardens in Qing Dynasty——research on Tianyige and the imitation and restoration of the seven libraries of Siku quanshu. In: Journal of Asian Architecture and Building Engineering, v. 21, n. 2 (March 2021).
- (2020): Advances in research for underground buildings: Energy, thermal comfort and indoor air quality. In: Energy and Buildings, v. 215 (May 2020).
- (2020): Influences of occupant ventilation-behavior during off-periods on indoor thermal environment in intermittently heated buildings. In: Building and Environment, v. 186 (December 2020).
- (2020): Comparison of ground coupled heat transfer models for predicting underground building energy consumption. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Hydration, microstructure and autogenous shrinkage behaviors of cement mortars by addition of superabsorbent polymers. In: Frontiers of Structural and Civil Engineering, v. 14, n. 5 (August 2020).
- (2020): An improved extreme gradient boosting approach to vehicle speed prediction for construction simulation of earthwork. In: Automation in Construction, v. 119 (November 2020).
- (2017): Probabilistic Risk Analysis of Diversion Tunnel Construction Simulation. In: Computer-Aided Civil and Infrastructure Engineering, v. 32, n. 9 (August 2017).
- (2020): A critical state-of-the-art review of durability and functionality of open-graded friction course mixtures. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): Experimental Study on Moisture Susceptibility of Subgrade Soil with Superabsorbent Polymers. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 7 (July 2019).
- (2019): Design methodology and mechanical properties of Superabsorbent Polymer (SAP) cement-based materials. In: Construction and Building Materials, v. 204 (April 2019).
- (2015): Prediction of Dredging Productivity Using a Rock and Soil Classification Model. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 141, n. 4 (July 2015).
- (2016): Construction Simulation for a Core Rockfill Dam Based on Optimal Construction Stages and Zones: Case Study. In: Journal of Computing in Civil Engineering, v. 30, n. 3 (May 2016).
- (2017): Porosity- and reliability-based evaluation of concrete-face rock dam compaction quality. In: Automation in Construction, v. 81 (September 2017).
Structurae cooperates with
