0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Ben Young ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Nogueira, Mateus M. / de Lima, Luciano R. O. / da Silva, André T. / Young, Ben (2024): Experimental investigation of cold-formed stainless steel tubular T-joints with loaded chord. In: Journal of Constructional Steel Research, v. 220 (September 2024).

    https://doi.org/10.1016/j.jcsr.2024.108856

  2. Chen, Man-Tai / Young, Ben / Martins, André Dias / Camotim, Dinar / Dinis, Pedro Borges (2021): Experimental investigation on cold-formed steel lipped channel beams affected by local-distortional interaction under non-uniform bending. In: Thin-Walled Structures, v. 161 (April 2021).

    https://doi.org/10.1016/j.tws.2021.107494

  3. Li, Qiu-Yun / Young, Ben (2022): Experimental and numerical investigation on cold-formed steel built-up section pin-ended columns. In: Thin-Walled Structures, v. 170 (January 2022).

    https://doi.org/10.1016/j.tws.2021.108444

  4. Cai, Yancheng / Quach, Wai-Meng / Young, Ben (2019): Experimental and numerical investigation of concrete-filled hot-finished and cold-formed steel elliptical tubular stub columns. In: Thin-Walled Structures, v. 145 (December 2019).

    https://doi.org/10.1016/j.tws.2019.106437

  5. Chen, Man-Tai / Young, Ben / Martins, André Dias / Camotim, Dinar / Dinis, Pedro Borges (2020): Experimental investigation on cold-formed steel stiffened lipped channel columns undergoing local-distortional interaction. In: Thin-Walled Structures, v. 150 (May 2020).

    https://doi.org/10.1016/j.tws.2020.106682

  6. Li, Hai-Ting / Jin, Chun-Chi / Li, Qiu-Yun / Young, Ben (2024): Experimental investigation of cold-formed stainless steel built-up closed section stub columns. In: Engineering Structures, v. 306 (May 2024).

    https://doi.org/10.1016/j.engstruct.2024.117657

  7. Li, Qiu-Yun / Young, Ben (2023): Experimental and numerical studies on cold-formed steel battened columns. In: Engineering Structures, v. 288 (August 2023).

    https://doi.org/10.1016/j.engstruct.2023.116110

  8. Zhao, Ou / Rossi, Barbara / Gardner, Leroy / Young, Ben (2016): Experimental and Numerical Studies of Ferritic Stainless Steel Tubular Cross Sections under Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 142, n. 2 (February 2016).

    https://doi.org/10.1061/(asce)st.1943-541x.0001366

  9. Chen, Man-Tai / Chen, Yangyu / Young, Ben (2023): Experimental investigation on cold-formed steel elliptical hollow section T-joints. In: Engineering Structures, v. 283 (May 2023).

    https://doi.org/10.1016/j.engstruct.2023.115593

  10. Li, Shuai / Chan, Tak-Ming / Young, Ben (2023): Experimental investigation on axial compressive behavior of novel FRP-ECC-HSC composite short column. In: Composite Structures, v. 303 (January 2023).

    https://doi.org/10.1016/j.compstruct.2022.116285

  11. Zhong, Yukai / Zhao, Ou / Young, Ben (2022): Experimental and numerical investigations of recycled aggregate concrete-filled stainless steel tube stub columns under combined compression and bending. In: Engineering Structures, v. 266 (September 2022).

    https://doi.org/10.1016/j.engstruct.2022.114502

  12. Jiang, Ke / Zhao, Ou / Young, Ben (2022): Experimental and numerical study of stainless steel channel-to-gusset plate connections. In: Engineering Structures, v. 265 (August 2022).

    https://doi.org/10.1016/j.engstruct.2022.114461

  13. Sun, Yao / Liang, Yating / Zhao, Ou / Young, Ben (2021): Experimental and Numerical Investigations of S690 High-Strength Steel Welded I-Sections under Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 147, n. 5 (May 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002991

  14. Fang, Han / Chan, Tak-Ming / Young, Ben (2021): Experimental and Numerical Investigations of Octagonal High-Strength Steel Tubular Stub Columns under Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 147, n. 1 (January 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002848

  15. Chen, Ju / Young, Ben (2007): Experimental investigation of cold-formed steel material at elevated temperatures. In: Thin-Walled Structures, v. 45, n. 1 (January 2007).

    https://doi.org/10.1016/j.tws.2006.11.003

  16. Feng, Ran / Young, Ben (2008): Experimental investigation of cold-formed stainless steel tubular T-joints. In: Thin-Walled Structures, v. 46, n. 10 (October 2008).

    https://doi.org/10.1016/j.tws.2008.01.008

  17. Huang, Yuner / Young, Ben (2014): Experimental investigation of cold-formed lean duplex stainless steel beam-columns. In: Thin-Walled Structures, v. 76 (March 2014).

    https://doi.org/10.1016/j.tws.2013.11.006

  18. Young, Ben / Ellobody, Ehab (2006): Experimental investigation of concrete-filled cold-formed high strength stainless steel tube columns. In: Journal of Constructional Steel Research, v. 62, n. 5 (May 2006).

    https://doi.org/10.1016/j.jcsr.2005.08.004

  19. Zhou, Feng / Young, Ben (2007): Experimental and numerical investigations of cold-formed stainless steel tubular sections subjected to concentrated bearing load. In: Journal of Constructional Steel Research, v. 63, n. 11 (November 2007).

    https://doi.org/10.1016/j.jcsr.2006.12.007

  20. Young, Ben (2008): Experimental and numerical investigation of high strength stainless steel structures. In: Journal of Constructional Steel Research, v. 64, n. 11 (November 2008).

    https://doi.org/10.1016/j.jcsr.2008.05.004

  21. Chen, Man-Tai / Young, Ben (2018): Experimental and numerical investigation on cold-formed steel semi-oval hollow section compression members. In: Journal of Constructional Steel Research, v. 151 (December 2018).

    https://doi.org/10.1016/j.jcsr.2018.09.009

  22. Zhang, Jia-Hui / Young, Ben (2018): Experimental investigation of cold-formed steel built-up closed section columns with web stiffeners. In: Journal of Constructional Steel Research, v. 147 (August 2018).

    https://doi.org/10.1016/j.jcsr.2018.04.008

  23. Zhu, Ji-Hua / Young, Ben (2006): Experimental investigation of aluminum alloy circular hollow section columns. In: Engineering Structures, v. 28, n. 2 (January 2006).

    https://doi.org/10.1016/j.engstruct.2005.07.012

  24. Li, Hai-Ting / Young, Ben (2018): Experimental Investigation of Concrete-Filled High-Strength Steel Tubular X Joints. In: Journal of Structural Engineering (ASCE), v. 144, n. 10 (October 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0002176

  25. Feng, Ran / Young, Ben (2015): Experimental Investigation of Aluminum Alloy Stub Columns with Circular Openings. In: Journal of Structural Engineering (ASCE), v. 141, n. 11 (November 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001265

  26. Ma, Jia-Lin / Chan, Tak-Ming / Young, Ben (2016): Experimental investigation of cold-formed high strength steel tubular beams. In: Engineering Structures, v. 126 (November 2016).

    https://doi.org/10.1016/j.engstruct.2016.07.027

  27. Young, Ben / Liu, Yahua (2003): Experimental Investigation of Cold-Formed Stainless Steel Columns. In: Journal of Structural Engineering (ASCE), v. 129, n. 2 (February 2003).

    https://doi.org/10.1061/(asce)0733-9445(2003)129:2(169)

  28. Zhu, Ji-Hua / Young, Ben (2006): Experimental Investigation of Aluminum Alloy Thin-Walled Tubular Members in Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 132, n. 12 (December 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:12(1955)

  29. Zhou, Feng / Young, Ben (2007): Experimental Investigation of Cold-Formed High-Strength Stainless Steel Tubular Members Subjected to Combined Bending and Web Crippling. In: Journal of Structural Engineering (ASCE), v. 133, n. 7 (July 2007).

    https://doi.org/10.1061/(asce)0733-9445(2007)133:7(1027)

  30. Young, Ben (2005): Experimental Investigation of Cold-Formed Steel Lipped Angle Concentrically Loaded Compression Members. In: Journal of Structural Engineering (ASCE), v. 131, n. 9 (September 2005).

    https://doi.org/10.1061/(asce)0733-9445(2005)131:9(1390)

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine