Seong-Tae Yi 
- (2019): Evaluation on Protection Performance and On-Site Applicability of Hybrid Fiber-Reinforced Concrete. In: International Journal of Concrete Structures and Materials, v. 13, n. 1 (January 2019).
- (2005): Long-term strength prediction of concrete with curing temperature. In: Cement and Concrete Research, v. 35, n. 10 (October 2005).
- (2004): Fracture characteristics of concrete at early ages. In: Cement and Concrete Research, v. 34, n. 3 (March 2004).
- (2005): Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties. In: Cement and Concrete Research, v. 35, n. 11 (November 2005).
- (2023): Analysing shear strength of concrete beams using a meso-scale finite-element method. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 176, n. 9 (September 2023).
- (2022): Effect of Chlorine Bypass System-Dust on Fresh State Properties and Strength Development of High-Volume Blast-Furnace Slag Mortar. In: Proceedings of the Institution of Civil Engineers - Engineering Sustainability, v. 175, n. 2 (April 2022).
- (2021): Fire resistance of bi-directionally prestressed concrete under extreme fire loading. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 174, n. 9 (September 2021).
- (2019): Effect of WRP and FGD gypsum on engineering properties and microstructures of HVBSM. In: Green Materials, v. 7, n. 2 (June 2019).
- (2022): Application of Meso-scale Finite Element Method to Strength and Size Effect of Concrete. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 175, n. 2 (February 2022).
- (2020): Analysis of the benefit of studs in steel-plate–concrete walls with bending and shear. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 173, n. 4 (April 2020).
- (2008): Minimum curing time for preventing frost damage of early-age concrete. In: The IES Journal Part A: Civil & Structural Engineering, v. 1, n. 3 (August 2008).
- (2020): Improved stud layouts for steel-plate–concrete walls subject to blast load. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 173, n. 11 (November 2020).
- (2016): Evaluation on the durability of low heat concrete using ternary blended cement. In: Computers and Concrete, v. 18, n. 4 (October 2016).
- (2016): Capacity evaluation of newly developed studs for SC walls subjected to bending moment. In: Computers and Concrete, v. 18, n. 4 (October 2016).
- (2016): Mechanical properties and adiabatic temperature rise of low heat concrete using ternary blended cement. In: Computers and Concrete, v. 17, n. 2 (February 2016).
- (2016): Analytical performance evaluation of modified inclined studs for steel plate concrete wall subjected to cyclic loads. In: Computers and Concrete, v. 17, n. 2 (February 2016).
- (2014): Effects of Aggregate and Specimen Sizes on Lightweight Concrete Fracture Energy. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 5 (May 2014).
- (2010): Effect of partial replacement of sand with dry oyster shell on the long-term performance of concrete. In: Construction and Building Materials, v. 24, n. 5 (May 2010).
- (2011): Minimum curing time prediction of early-age concrete to prevent frost damage. In: Construction and Building Materials, v. 25, n. 3 (March 2011).
- (2011): The effects of hydraulic pressure and crack width on water permeability of penetration crack-induced concrete. In: Construction and Building Materials, v. 25, n. 5 (May 2011).
- (2013): Application of the colorimetric method to chloride diffusion evaluation in concrete structures. In: Construction and Building Materials, v. 41 (April 2013).
- (2014): Effect of corrosion method of the reinforcing bar on bond characteristics in reinforced concrete specimens. In: Construction and Building Materials, v. 54 (March 2014).
- (2018): Natural frequency and damping ratio of steel plate–concrete walls with inclined studs under forced oscillation. In: Magazine of Concrete Research, v. 70, n. 14 (July 2018).
- (2015): Effect of oyster shell as an aggregate replacement on the characteristics of concrete. In: Magazine of Concrete Research, v. 67, n. 15 (August 2015).
- (2014): Experimental study of concrete decks restrained by steel strap. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 167, n. 10 (October 2014).
- (2013): Effect of hybrid fibre reinforcement on capacity of reinforced concrete beams. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 166, n. 10 (November 2013).
- (2013): Automated image processing technique for detecting and analysing concrete surface cracks. In: Structure and Infrastructure Engineering, v. 9, n. 6 (June 2013).
- (2004): Correction factor suggestion for ACI development length provisions based on flexural testing of RC slabs with various levels of corroded reinforcing bars. In: Engineering Structures, v. 26, n. 8 (July 2004).
- (2006): High-strength concrete columns confined by low-volumetric-ratio lateral ties. In: Engineering Structures, v. 28, n. 9 (July 2006).
- (2004): Mechanical Characteristics of Axially Restrained Concrete Specimens at Early Ages. In: Journal of Materials in Civil Engineering (ASCE), v. 16, n. 1 (February 2004).
Structurae cooperates with
