Guang Ye 
- (2024): Characterization, pre-treatment, and potential applications of fine MSWI bottom ash as a supplementary cementitious material. In: Construction and Building Materials, v. 421 (March 2024).
- (2020): Dependence of unsaturated chloride diffusion on the pore structure in cementitious materials. In: Cement and Concrete Research, v. 127 (January 2020).
- (2019): Chemical deformation of metakaolin based geopolymer. In: Cement and Concrete Research, v. 120 (June 2019).
- (2019): Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes. In: Cement and Concrete Research, v. 116 (February 2019).
- (2016): Diffusivity of saturated ordinary Portland cement-based materials: A critical review of experimental and analytical modelling approaches. In: Cement and Concrete Research, v. 90 (December 2016).
- (2005): Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation. In: Cement and Concrete Research, v. 35, n. 5 (May 2005).
- (2010): Characterization of pore structure in cement-based materials using pressurization–depressurization cycling mercury intrusion porosimetry (PDC-MIP). In: Cement and Concrete Research, v. 40, n. 7 (July 2010).
- (2013): Characterization and quantification of self-healing behaviors of microcracks due to further hydration in cement paste. In: Cement and Concrete Research, v. 52 (October 2013).
- (2014): Effect of blast furnace slag on self-healing of microcracks in cementitious materials. In: Cement and Concrete Research, v. 60 (June 2014).
- (2015): Combined experimental and numerical study of fracture behaviour of cement paste at the microlevel. In: Cement and Concrete Research, v. 73 (July 2015).
- (2022): Characterizing the effects of Al(OH)3 and Mg(OH)2 on reaction products and drying shrinkage characteristics of alkali-activated slag. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2021): Early-age properties of alkali-activated slag and glass wool paste. In: Construction and Building Materials, v. 291 (July 2021).
- (2021): A comparative study on the mechanical properties, autogenous shrinkage and cracking proneness of alkali-activated concrete and ordinary Portland cement concrete. In: Construction and Building Materials, v. 292 (July 2021).
- (2021): Effect of metakaolin on the autogenous shrinkage of alkali-activated slag-fly ash paste. In: Construction and Building Materials, v. 278 (April 2021).
- (2021): Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods. In: Construction and Building Materials, v. 273 (March 2021).
- (2018): Effective diffusivity of cement pastes from virtual microstructures: Role of gel porosity and capillary pore percolation. In: Construction and Building Materials, v. 165 (March 2018).
- (2018): Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes. In: Construction and Building Materials, v. 161 (February 2018).
- (2020): Effects of heat and pressure on hot-pressed geopolymer. In: Construction and Building Materials, v. 231 (January 2020).
- (2019): Characterization of cogeneration generated Napier grass ash and its potential use as SCMs. In: Materials and Structures, v. 52, n. 4 (June 2019).
- (2012): Computational investigation on mass diffusivity in Portland cement paste based on X-ray computed microtomography (μCT) image. In: Construction and Building Materials, v. 27 (February 2012).
- (2013): Characterization of ITZ in ternary blended cementitious composites: Experiment and simulation. In: Construction and Building Materials, v. 41 (April 2013).
- (2013): Determination of water permeability of cementitious materials using a controlled constant flow method. In: Construction and Building Materials, v. 47 (October 2013).
- (2015): Effect of limestone fillers on microstructure and permeability due to carbonation of cement pastes under controlled CO 2 pressure conditions. In: Construction and Building Materials, v. 82 (May 2015).
- (2016): Cement hydration and microstructure in concrete repairs with cementitious repair materials. In: Construction and Building Materials, v. 112 (June 2016).
- (2017): Effect of fly ash on the pore structure of cement paste under a curing period of 3 years. In: Construction and Building Materials, v. 144 (July 2017).
- (2017): Effect of superabsorbent polymers (SAP) on the freeze–thaw resistance of concrete: results of a RILEM interlaboratory study. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2010): Development of engineered cementitious composites with limestone powder and blast furnace slag. In: Materials and Structures, v. 43, n. 6 (July 2010).
- (2014): Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test. In: Materials and Structures, v. 47, n. 3 (March 2014).
- (2016): Assessment of Structural Feature and Ionic Diffusivity of ITZ in Blended Cementitious Composites. In: Journal of Advanced Concrete Technology, v. 14, n. 7 ( 2016).
- (2018): Coupled thermodynamic modelling and experimental study of sodium hydroxide activated slag. In: Construction and Building Materials, v. 188 (November 2018).
Structurae cooperates with
