Yiming Yao 
- (2024): Effects of temperature and loading rate on the shear performance of GFRP-steel single-lap joints. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Flexural behavior of textile reinforced 3D printed concrete under quasi-static and dynamic impact loads. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Distributions of coarse aggregate and steel fiber in ultra-high performance concrete: Migration behavior and correlation with compressive strength. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Effects of the expansion mechanisms on the pyrrhotite-induced deterioration of concrete foundations. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Feasibility study of engineered geopolymer composites based high-calcium fly ash and micromechanics analysis. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Effect of MgO expansive agent on the shrinkage and mechanical properties of SHCC containing coarse silica sand. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Cyclic Loading Test and Numerical Modeling on Prefabricated UHPC Tube–Confined Rectangular Bridge Piers with Different Base Connections. In: Journal of Structural Engineering (ASCE), v. 149, n. 10 (October 2023).
- (2023): Experimental study of tensile properties of strain-hardening cementitious composites (SHCCs) reinforced with innovative twisted basalt fibers. In: Structures, v. 48 (February 2023).
- (2023): Experimental study on flexural behavior of BTRM reinforced with hybrid combinations of short fibers and pre-stressing. In: Structures, v. 49 (March 2023).
- (2023): Fatigue performance of stud shear connectors in steel-concrete composite beam with initial damage. In: Engineering Structures, v. 276 (February 2023).
- (2023): Fatigue performance of prefabricated coarse aggregate ultrahigh-performance concrete deck subjected to negative bending moment. In: Engineering Structures, v. 274 (January 2023).
- (2022): Development and Performance of Innovative Steel Wedge Block–Crossed Inclined Stud–UHPC Connections for Composite Bridge. In: Journal of Structural Engineering (ASCE), v. 148, n. 9 (September 2022).
- (2022): Deformation performance analysis of concrete shear wall with CFRP grids based on the modified uniaxial shear-flexural model. In: Journal of Building Engineering, v. 54 (August 2022).
- (2021): The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: A critical review. In: Construction and Building Materials, v. 282 (May 2021).
- (2021): Anchorage performance of bolt connection embedded in thin UHPC members. In: Structures, v. 34 (December 2021).
- (2021): Fatigue performance of UHPC bridge deck system with field-cast dovetail joint. In: Engineering Structures, v. 237 (June 2021).
- (2016): Experimental study on basalt FRP/steel single-lap joints under different loading rates and temperatures. In: Composite Structures, v. 145 (June 2016).
- (2020): Experimental study on cyclic behavior of hybrid CFRP grids-steel shear walls. In: Structures, v. 28 (December 2020).
- (2020): Effects of Loading Rate and Temperature on Pullout Response of Basalt Textile–Reinforced Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 8 (August 2020).
- (2021): Analytical approach for the design of flexural elements made of reinforced ultra‐high performance concrete. In: Structural Concrete, v. 22, n. 1 (February 2021).
- (2020): Flexural Performance of Basalt Textile-Reinforced Concrete with Pretension and Short Fibers. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (March 2020).
- (2018): Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures. In: Construction and Building Materials, v. 175 (June 2018).
- (2018): Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads. In: Construction and Building Materials, v. 169 (April 2018).
- (2021): Effect of sand grain size and fiber size on macro-micro interfacial bond behavior of steel fibers and UHPC mortars. In: Magazine of Concrete Research, v. 73, n. 5 (March 2021).
- (2018): Analytical displacement solutions for statically determinate beams based on a trilinear moment–curvature model. In: Structural Concrete, v. 19, n. 6 (December 2018).
- (2018): Interaction diagrams for design of hybrid fiber-reinforced tunnel segments. In: Materials and Structures, v. 51, n. 1 (February 2018).
- (2015): Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams. In: Engineering Structures, v. 100 (October 2015).
- (2016): Experimental study of tensile behaviour of AFRP under different strain rates and temperatures. In: Journal of Structural Integrity and Maintenance, v. 1, n. 1 (January 2016).
- (2018): Effects of Strain Rate and Temperature on the Flexural Behavior of Basalt and Glass Textile–Reinforced Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 8 (August 2018).
- (2017): Failure Localization and Correlation of High-Speed Tension and Impact Tests of Strain-Hardening Cement-Based Composites. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 11 (November 2017).
Structurae cooperates with
