Yang Yao
- (2023): Field measurement and analysis of subway tunnel thermal environment in severe cold region. In: Building and Environment, v. 243 (September 2023).
- (2023): Experimental investigation on the feasibility of a solution regenerator unit using freeze concentration for heat source tower heat pump system. In: Energy and Buildings, v. 284 (April 2023).
- (2023): Visualization of physical-field structural evolution: Characteristic curve based on the non-equilibrium potential differences in an air-conditioning environment. In: Journal of Building Engineering, v. 66 (May 2023).
- (2022): Performance study of cement-based grouts based on testing and thermal conductivity modeling for ground-source heat pumps. In: Energy and Buildings, v. 272 (October 2022).
- (2022): Field experiment on influence of cold protection technologies on thermal environment of subway station in severe cold region. In: Building and Environment, v. 216 (May 2022).
- (2022): Investigation on thermal environment of subway stations in severe cold region of China: A case study in Harbin. In: Building and Environment, v. 212 (March 2022).
- (2022): Performance optimization of space heating using variable water flow air source heat pumps as heating source: Adopting new control methods for water pumps. In: Energy and Buildings, v. 255 (January 2022).
- (2022): Experimental investigation on improving defrosting performance of air source heat pump through vapor injection. In: Energy and Buildings, v. 256 (February 2022).
- (2014): The field test and optimization of a solar assisted heat pump system for space heating in extremely cold area. In: Sustainable Cities and Society, v. 13 (October 2014).
- (2021): Investigation on the regulating methods of air source heat pump system used for district heating: Considering the energy loss caused by frosting and on–off. In: Energy and Buildings, v. 235 (March 2021).
- (2020): Experimental study on long-term fouling of enhanced tubes: Effect of water quality. In: Science and Technology for the Built Environment, v. 26, n. 9 (September 2020).
- (2017): Reliability evaluation of existing district heating networks based on a building's realistic heat gain under failure condition. In: Science and Technology for the Built Environment, v. 23, n. 3 (February 2017).
- (2015): Simulation analysis of a solar-assisted heat pump system for space heating in severe cold areas. In: Building Services Engineering Research and Technology, v. 36, n. 4 (June 2015).
- (2015): Predictive performance of a wastewater source heat pump using artificial neural networks. In: Building Services Engineering Research and Technology, v. 36, n. 3 (April 2015).
- (2014): Experimental study on concentration change of spray solution used for a novel non-frosting air source heat pump system. In: Energy and Buildings, v. 68 (January 2014).
- (2020): Technical, economic and environmental investigation on heating performance of quasi-two stage compression air source heat pump in severe cold region. In: Energy and Buildings, v. 223 (September 2020).
- (2020): Experimental and theoretical investigation on defrosting characteristics of a multi-split air source heat pump with vapor injection. In: Energy and Buildings, v. 217 (June 2020).
- (2020): The effect of PM2.5 air pollution on the frosting process of outdoor finned-tube evaporator. In: Energy and Buildings, v. 213 (April 2020).
- (2020): Application characteristics of variable refrigerant flow heat pump system with vapor injection in severe cold region. In: Energy and Buildings, v. 211 (March 2020).
- (2020): Analyses of different operation modes of pumping and recharging well using an indoor sandbox test. In: Energy and Buildings, v. 208 (February 2020).
- (2019): Experimental investigation on the cooling performance of an Earth to Air Heat Exchanger (EAHE) equipped with an irrigation system to adjust soil moisture. In: Energy and Buildings, v. 196 (August 2019).
- (2019): Experimental research on the characteristics of single-well groundwater heat pump systems. In: Energy and Buildings, v. 191 (May 2019).
- (2007): Evaluation of coupled outdoor and indoor thermal comfort environment and anthropogenic heat. In: Building and Environment, v. 42, n. 2 (February 2007).
- (2015): Improved actuated strain of dielectric elastomer through disruption of hydrogen bonds of thermoplastic polyurethane by adding diaminonaphthalene. In: Smart Materials and Structures, v. 24, n. 3 (March 2015).
Structurae cooperates with
