Zhengxian Yang 
- (2024): Experimental evaluation of the effectiveness of fiber orientation methods on the mechanical performance of UHPFRC. In: Construction and Building Materials, v. 448 (October 2024).
- (2024): Autogenous shrinkage and sustainability assessment of alkali-activated slag incorporating steel slag. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Investigation on the anti-carbonation properties of alkali-activated slag concrete: Effect of activator types and dosages. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): The microstructure and NOx degradation ability of alkali-activated steel slag-based pervious concrete doped with g-C3N4/CoAl-LDH. In: Construction and Building Materials, v. 419 (March 2024).
- (2024): Nanoscale chloride diffusion in alkali-activated steel slag and ultrafine blast furnace slag considering the electrical double layer effect. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Experimental study on dynamic characteristics of rubber sand mixtures. Presented at: IABSE Congress: Engineering for Sustainable Development, New Delhi, India, 20-22 September 2023.
- (2024): Effects of desalinated sea sand on the alkali-silica reaction of seawater and sea sand concrete. In: Magazine of Concrete Research, v. 76, n. 7 (April 2024).
- (2023): Mechanical performance study of basalt-polyethylene fiber reinforced concrete under dynamic compressive loading. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Damage evaluation of ballastless track concrete under high frequency flexural fatigue loading based on surface resistivity. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Mechanical properties and microstructure of engineered cementitious composites with high volume steel slag and GGBFS. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Microstructural and mechanical properties of photocatalytic cement mortar with g-C3N4/CoAl-LDH nanoflowers. In: Journal of Building Engineering, v. 74 (September 2023).
- (2023): Effect of fineness on the hydration and microstructure of cementitious materials with high-volume steel slag and blast furnace slag. In: Journal of Building Engineering, v. 72 (August 2023).
- (2020): Dependence of unsaturated chloride diffusion on the pore structure in cementitious materials. In: Cement and Concrete Research, v. 127 (January 2020).
- (2022): Effect of superabsorbent polymer introduction on properties of alkali-activated slag mortar. In: Construction and Building Materials, v. 340 (July 2022).
- (2022): Interaction between cement and asphalt emulsion and its influences on asphalt emulsion demulsification, cement hydration and rheology. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): The effect of TiO2@CoAl-LDH nanosphere on early hydration of cement and its photocatalytic depollution performance under UV–visible light. In: Construction and Building Materials, v. 319 (February 2022).
- (2022): Influence of liquid-binder ratio on the performance of alkali-activated slag mortar with superabsorbent polymer. In: Journal of Building Engineering, v. 48 (May 2022).
- (2018): Laboratory investigation of graphene oxide suspension as a surface sealer for cementitious mortars. In: Construction and Building Materials, v. 162 (February 2018).
- (2018): Impact of nanoclay and carbon microfiber in combating the deterioration of asphalt concrete by non-chloride deicers. In: Construction and Building Materials, v. 160 (January 2018).
- (2018): Biogenic sulfuric acid corrosion resistance of new artificial reef concrete. In: Construction and Building Materials, v. 158 (January 2018).
- (2020): Efficiency and durability of g-C3N4-based coatings applied on mortar under peeling and washing trials. In: Construction and Building Materials, v. 234 (February 2020).
- (2020): Influence of different activators on microstructure and strength of alkali-activated nickel slag cementitious materials. In: Construction and Building Materials, v. 235 (February 2020).
- (2009): Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar. In: Construction and Building Materials, v. 23, n. 6 (June 2009).
- (2013): Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications. In: Construction and Building Materials, v. 47 (October 2013).
- (2017): Experimental and numerical study of crack behaviour for capsule-based self-healing cementitious materials. In: Construction and Building Materials, v. 156 (December 2017).
- (2019): Damage assessment of asphalt concrete with composite additives at the FAM–coarse aggregate interfacial zone. In: Construction and Building Materials, v. 198 (February 2019).
- (2010): Freeze–thaw damage and chemical change of a portland cement concrete in the presence of diluted deicers. In: Materials and Structures, v. 43, n. 7 (August 2010).
- (2018): Mechanical behavior of ultra-high performance concrete (UHPC) using recycled fine aggregate cured under different conditions and the mechanism based on integrated microstructural parameters. In: Construction and Building Materials, v. 192 (December 2018).
- (2009): Deicer Impacts on Pavement Materials: Introduction and Recent Developments. In: The Open Civil Engineering Journal, v. 3, n. 1 (October 2009).
- (2017): Laboratory Investigation into the Modification of Transport Properties of High-Volume Fly Ash Mortar by Chemical Admixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 10 (October 2017).
Structurae cooperates with
