Zhenghong Yang
- (2024): Investigation on the carbonation and heavy metals stabilization of MSWI fly ash by incorporating γ-C2S and Portland cement. In: Construction and Building Materials, v. 445 (September 2024).
- : The influence of natural wind patterns on the thermal and humidity comfort of the “one seal” building in Yunnan, China. In: Journal of Asian Architecture and Building Engineering.
- (2024): Damage resistance of calcium sulfoaluminate cement-based engineered cementitious composite (CSA–ECC) under vehicle-bridge coupling vibration. In: Materials and Structures, v. 57, n. 5 (16 May 2024).
- (2024): Effect of Cr2O3 on the clinkerization and carbonation properties of γ-C2S. In: Journal of Building Engineering, v. 90 (August 2024).
- (2023): Humidity evolution in cement-based materials is monitored using fluorescent molecular humidity-sensitive responses. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Non-destructive test system to monitor hydration and strength development of low CO2 concrete. In: Construction and Building Materials, v. 408 (December 2023).
- (2024): Feasibility of carbon dioxide uptake cementitious materials preparation by combining γ-C2S with red mud. In: Construction and Building Materials, v. 412 (January 2024).
- (2023): Mechanical properties of fiber‐reinforced calcium sulfoaluminate cement mortars. In: ce/papers, v. 6, n. 6 (December 2023).
- (2023): Long-term (2 years) drying shrinkage evaluation of alkali-activated slag mortar: Experiments and partial factor analysis. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Effect of curing time and temperature on the mechanical properties of green and ultra-high-strength non-sintered aggregate via autoclave technology. In: Construction and Building Materials, v. 374 (April 2023).
- (2022): Efflorescence inhibition and microstructure evolution of Portland cement-based artificial stone induced by mineral additives. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2021): The improvement of freezing–thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel. In: Construction and Building Materials, v. 291 (July 2021).
- (2022): Mitigation effect of accelerators on the lead–zinc tailing induced retardation in autoclaved concrete. In: Construction and Building Materials, v. 352 (October 2022).
- (2022): Co-utilization of quarry tailings and fly ash for non-sintered ultra-lightweight aggregates (ULWAs) by autoclave technology. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Experimental and modelling study on the deterioration of stabilized soft soil subjected to sulfate attack. In: Construction and Building Materials, v. 346 (September 2022).
- (2021): Deformation analysis and failure prediction of bonding mortar in external thermal insulation cladding system (ETICS) by coupled multi physical fields method. In: Construction and Building Materials, v. 278 (April 2021).
- (2022): Promoting the sustainable fabrication of bricks from municipal sewage sludge through modifying calcination: Microstructure and performance characterization. In: Construction and Building Materials, v. 324 (March 2022).
- (2021): Insight into Early-Age Performance of Cement Paste/Mortar with C-S-Hs-PCE and Aluminum Sulfate. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021).
- (2021): Influence of defoaming agents on mechanical performances and pore characteristics of Portland cement paste/mortar in presence of EVA dispersible powder. In: Journal of Building Engineering, v. 41 (September 2021).
- (2020): Effect of Chloride Ion Content and Replacement Ratio of Manufactured Sand on Performance of Sea Sand Masonry Mortar. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 1 (October 2020).
- (2020): Influence of calcination temperature on the structure and hydration of MgO. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Macromechanical Properties and ITZ of Lightweight Aggregate Concrete from the Deck of Nanjing Yangtze River Bridge after 50 Years. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (May 2020).
- (2020): Early hydration of tricalcium silicate with potassium hydroxide and sulfate from pore solution and solid view. In: Construction and Building Materials, v. 230 (January 2020).
- (2019): Composition and microstructure of 50-year lightweight aggregate concrete (LWAC) from Nanjing Yangtze River bridge (NYRB). In: Construction and Building Materials, v. 216 (August 2019).
- (2015): Influence of Surface Sealers on the Properties of Internally Cured Cement Mortars Containing Saturated Fine Lightweight Aggregate. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 12 (December 2015).
- (2015): Interactive Effect of Mechanical Fatigue Load and the Fatigue Effect of Freeze-Thaw on Combined Damage of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 8 (August 2015).
- (2013): High-Strength Ceramsite Made with Sludge and Low-Quality Fly Ash. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 7 (July 2013).
- (2018): Early hydration process of the cement-lime system. In: ce/papers, v. 2, n. 4 (September 2018).
- (2016): Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method. In: Materials and Structures, v. 49, n. 12 (December 2016).
- (2018): Effects of aphthitalite on the formation of clinker minerals and hydration properties. In: Construction and Building Materials, v. 183 (September 2018).
Structurae cooperates with
