Xudong Yang 
- (2024): Experimental investigation of a distributed photovoltaic heating system based on building envelope thermal storage. In: Energy and Buildings, v. 319 (September 2024).
- (2024): Estimating indoor air temperature by obtaining outdoor building window surface temperature using infrared technology: An exploratory approach. In: Building and Environment, v. 251 (March 2024).
- (2023): Method to elucidate the spatial–temporal characteristics of the intermittent heating demand of rural houses in northern China. In: Energy and Buildings, v. 288 (June 2023).
- (2023): Household solid desiccant dehumidifier with multiple operating modes: Concept and prototype device. In: Journal of Building Engineering, v. 66 (May 2023).
- (2023): Letter from the editor. In: Building and Environment, v. 234 (April 2023).
- (2022): An inversion method to estimate the thermal properties of heterogeneous soil for a large-scale borehole thermal energy storage system. In: Energy and Buildings, v. 263 (May 2022).
- (2022): Heat transfer enhancement for U-pipe evacuated tube solar absorber by high-emissivity coating on metal fin. In: Journal of Building Engineering, v. 50 (June 2022).
- (2022): Investigation on microstructures, compressive properties and energy absorption capacity of carbon nanotubes/aluminum composite foam-filled tubes. In: Composite Structures, v. 282 (February 2022).
- (2021): Investigating energy performance of large-scale seasonal storage in the district heating system of chifeng city: Measurements and model-based analysis of operation strategies. In: Energy and Buildings, v. 247 (September 2021).
- (2021): Long-term performance simulation and sensitivity analysis of a large-scale seasonal borehole thermal energy storage system for industrial waste heat and solar energy. In: Energy and Buildings, v. 236 (April 2021).
- (2012): Moving Building Simulation to the next level of excellence. In: Building Simulation, v. 5, n. 1 (March 2012).
- (2012): Modeling volatile organic compound (VOC) concentrations due to material emissions in a real residential unit. Part I: Methodology and a preliminary case study. In: Building Simulation, v. 5, n. 4 (August 2012).
- (2009): Investigating a safe ventilation rate for the prevention of indoor SARS transmission: An attempt based on a simulation approach. In: Building Simulation, v. 2, n. 4 (December 2009).
- (2013): A field investigation and comparative study of indoor environmental quality in heritage Chinese rural buildings with thick rammed earth wall. In: Energy and Buildings, v. 62 (July 2013).
- (2020): An experimental method for measuring VOC emissions from individual human whole-body skin under controlled conditions. In: Building and Environment, v. 181 (August 2020).
- (2020): Long-term volatile organic compound emission rates in a new electric vehicle: Influence of temperature and vehicle age. In: Building and Environment, v. 168 (January 2020).
- (2019): Improving material selection for residences using volatile organic compound simulation at design stage: Field verifications from a unique case study. In: Building and Environment, v. 157 (June 2019).
- (2019): Measuring whole-body volatile organic compound emission by humans: A pilot study using an air-tight environmental chamber. In: Building and Environment, v. 153 (April 2019).
- (2017): Human breath as a source of VOCs in the built environment, Part I: A method for sampling and detection species. In: Building and Environment, v. 125 (November 2017).
- (2017): Human breath as a source of VOCs in the built environment, Part II: Concentration levels, emission rates and factor analysis. In: Building and Environment, v. 123 (October 2017).
- (2015): Estimation of the contribution of human skin and ozone reaction to volatile organic compounds (VOC) concentration in aircraft cabins. In: Building and Environment, v. 94 (December 2015).
- (2014): Long-term concentrations of volatile organic compounds in a new apartment in Beijing, China. In: Building and Environment, v. 82 (December 2014).
- (2014): Measurements of volatile organic compounds in aircraft cabins. Part II: Target list, concentration levels and possible influencing factors. In: Building and Environment, v. 75 (May 2014).
- (2014): Measurements of volatile organic compounds in aircraft cabins. Part I: Methodology and detected VOC species in 107 commercial flights. In: Building and Environment, v. 72 (February 2014).
- (2013): Indoor formaldehyde in real buildings: Emission source identification, overall emission rate estimation, concentration increase and decay patterns. In: Building and Environment, v. 69 (November 2013).
- (2012): Experimental analysis on thermal performance of a solar air collector with a single pass. In: Building and Environment, v. 56 (October 2012).
- (2012): Key factor analysis of VOC sorption and its impact on indoor concentrations: The role of ventilation. In: Building and Environment, v. 47 (January 2012).
- (2008): An integrated modeling tool for simultaneous analysis of thermal performance and indoor air quality in buildings. In: Building and Environment, v. 43, n. 3 (March 2008).
- (2008): Modeling, assessment, and control of indoor air quality. In: Building and Environment, v. 43, n. 3 (March 2008).
- (2003): Influence of Diffuser Jet Characteristics on Indoor Air Distribution under Actual Connecting Conditions. In: Journal of Architectural Engineering (ASCE), v. 9, n. 4 (December 2003).
Structurae cooperates with
