Xiao Yang 
- (2023): Evaluating the Safety and Control Scheme of Coastal Railway Using Land Subsidence Coupling Model. In: KSCE Journal of Civil Engineering, v. 28, n. 2 (December 2023).
- (2023): Early-age properties and shrinkage induced stress of ultra-high-performance concrete under variable temperature and uniaxial restrained condition. In: Construction and Building Materials, v. 384 (June 2023).
- (2024): Nanoscale insight into fluidity improvement of supplementary cementitious materials on concrete: The nano-lubrication process. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Experimental investigation on the seismic behavior of composite steel plate shear wall restrained by ECC panels. In: Engineering Structures, v. 297 (December 2023).
- (2023): Combining Downscaled Global Climate Model Data with SWAT to Assess Regional Climate Change Properties and Hydrological Responses. In: KSCE Journal of Civil Engineering, v. 27, n. 5 (March 2023).
- (2023): Experimental and numerical study of T-shaped irregularly concrete-filled steel tube columns under combined axial loads and moments. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Long-Term Investigation of a Borehole Heat Exchanger (BHE) Array with the Influence of Same Inlet Temperature (SIT) and Same Heat Load (SHL) Boundaries. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Experimental research on the influence of different factors on the behaviour of broken coal and rock particles during compaction. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): Analysis and Prediction of Regional Land Subsidence with InSAR Technology and Machine Learning Algorithm. In: KSCE Journal of Civil Engineering, v. 27, n. 2 (November 2022).
- (2022): A Multi-scale Study of Enhancing Mechanical Property in Ultra-High Performance Concrete by Steel-fiber@Nano-silica. In: Construction and Building Materials, v. 342 (August 2022).
- (2021): Enhancing the PVA fiber-matrix interface properties in ultra high performance concrete: An experimental and molecular dynamics study. In: Construction and Building Materials, v. 285 (May 2021).
- (2021): National-scale assessment of decadal river migration at critical bridge infrastructure in the Philippines. In: Science of The Total Environment, v. 768 (May 2021).
- (2021): Bending of a Viscoelastic Timoshenko Cracked Beam Based on Equivalent Viscoelastic Spring Models. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Mechanical performance of self-stressing CFST columns under uniaxial compression. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Mechanical behavior of full-scale composite steel plate shear wall restrained by ECC panels. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Monitoring Analysis and Numerical Simulation of the Land Subsidence in Linear Engineering Areas. In: KSCE Journal of Civil Engineering, v. 25, n. 7 (May 2021).
- (2021): Compressive buckling behaviour of steel corrugated-plates in contact with a rigid medium. In: Composite Structures, v. 262 (April 2021).
- (2015): Analysis of higher order composite beams by exact and finite element methods. In: Structural Engineering and Mechanics, v. 53, n. 4 (February 2015).
- (2021): Interaction equations of composite walls with T-section under axial compression and biaxial bending. In: Engineering Structures, v. 229 (February 2021).
- (2016): Dynamic and fatigue performances of a large-scale space frame assembled using pultruded GFRP composites. In: Composite Structures, v. 138 (March 2016).
- (2015): Application of combinational sphere element in meso-mechanical analysis of cemented particulate composite. In: Composite Structures, v. 131 (November 2015).
- (2020): Flexural-torsional buckling and design recommendations of axially loaded concrete-infilled double steel corrugated-plate walls with T-section. In: Engineering Structures, v. 208 (April 2020).
- (2020): Flexural buckling of axially loaded concrete-infilled double steel corrugated-plate walls with T-section. In: Journal of Constructional Steel Research, v. 166 (March 2020).
- (2017): Fiber-Reinforced Polymer Composite Members with Adhesive Bonded Sleeve Joints for Space Frame Structures. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 2 (February 2017).
- (2016): Member Capacity of Pultruded GFRP Tubular Profile with Bolted Sleeve Joints for Assembly of Latticed Structures. In: Journal of Composites for Construction, v. 20, n. 3 (June 2016).
- (2016): Bolted Sleeve Joints for Connecting Pultruded FRP Tubular Components. In: Journal of Composites for Construction, v. 20, n. 1 (February 2016).
- (2013): Durability of autoclaved construction materials of sewage sludge–cement–fly ash–furnace slag. In: Construction and Building Materials, v. 48 (November 2013).
- (2017): Innovative use of a shape memory alloy ring spring system for self-centering connections. In: Engineering Structures, v. 153 (December 2017).
- (2018): Application of an Innovative SMA Ring Spring System for Self-Centering Steel Frames Subject to Seismic Conditions. In: Journal of Structural Engineering (ASCE), v. 144, n. 8 (August 2018).
Structurae cooperates with
