Peng Yang 
- (2025): High-Precision Diameter Detector for Nuclear Power Main Water Supply System Pipelines. In: Journal of Surveying Engineering (ASCE), v. 151, n. 1 (February 2025).
- : Parametric influence and optimization of the dehumidification performance of a variable-frequency dehumidifier. In: Science and Technology for the Built Environment.
- (2024): Modeling and parameter identification of rate-dependent hysteresis behavior based on modified-generalized Prandtl–Ishlinskii model. In: Smart Materials and Structures, v. 33, n. 7 (7 June 2024).
- (2024): Reliability Evaluation of Distribution Network with Electric Vehicles and Distributed Generations Based on Network Equivalence and Sequential Monte Carlo Method. In: Journal of Energy Engineering, v. 150, n. 4 (August 2024).
- : Seismic performance of precast piers connected by grouted splice sleeve with Central-tenon enhancement: experimental validation and system-level fragility study. In: Structure and Infrastructure Engineering.
- (2024): Nuclear containment damage detection and visualization positioning based on YOLOv5m-FFC. In: Automation in Construction, v. 161 (May 2024).
- (2024): Energy consumption analysis and optimization of cold stores considering differential electricity price. In: Energy and Buildings, v. 310 (May 2024).
- (2023): Rheology of ultrafine tailings cemented paste backfill: The effect of the aqueous solution pH and superplasticiser dosage. In: Construction and Building Materials, v. 404 (November 2023).
- (2024): Benchmark on the prediction of whipping response of a warship model in regular waves. In: Marine Structures, v. 94 (March 2024).
- (2023): Compression-shear performance of steel fiber reinforced rubber concrete. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Performance evaluation of an auto-cascade refrigeration system using grey correlation theory and response surface methodology. In: Science and Technology for the Built Environment, v. 29, n. 5 (April 2023).
- (2023): Layered re-breaking behavior of gangue backfilling materials and inspirations for protecting mined ecological environments. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Explicit double-phase-field formulation and implementation for bending behavior of UHPC-NC composite beams. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): A hybrid deep reinforcement learning ensemble optimization model for heat load energy-saving prediction. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): Study of Instability Mechanism and Roof Caving Mode of Cementing Filling Stope: The Case Study of a Nonferrous Metal Mine in China. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Novel waterproof bituminous coating using self-healing microcapsules containing ultraviolet light curing agent. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Dynamic characteristics of a domestic freezer with a microchannel flat-tube condenser. In: Science and Technology for the Built Environment, v. 28, n. 3 (March 2022).
- (2022): Auxiliary air pressure balance mode for EPB shield tunneling in water-rich gravelly sand strata: Feasibility and soil conditioning. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2021): Multiple band gaps for efficient wave attenuation by inertial amplification in periodic functionally graded beams. In: Composite Structures, v. 271 (September 2021).
- (2021): One-dimensional large-strain model for soft soil consolidation induced by vacuum-assisted prefabricated horizontal drain. In: European Journal of Environmental and Civil Engineering, v. 26, n. 11 (April 2021).
- (2021): Through-wall yield ductile burst pressure of high-grade steel tube and casing with and without corroded defect. In: Marine Structures, v. 76 (March 2021).
- (2019): District heating systems load forecasting: a deep neural networks model based on similar day approach. In: Advances in Building Energy Research, v. 14, n. 3 (August 2019).
- (2020): Buckling of composite laminates with multiple delaminations: Part II experiments. In: Composite Structures, v. 247 (September 2020).
- (2020): Phononic band gaps by inertial amplification mechanisms in periodic composite sandwich beam with lattice truss cores. In: Composite Structures, v. 231 (January 2020).
- (2015): Evaluation of temperature effects on low velocity impact damage in composite sandwich panels with polymeric foam cores. In: Composite Structures, v. 129 (October 2015).
- (2020): Gradient boosting machine for predicting return temperature of district heating system: A case study for residential buildings in Tianjin. In: Journal of Building Engineering, v. 27 (January 2020).
- (2015): An investigation into the mechanics of fiber reinforced composite disk springs. In: Steel and Composite Structures, v. 18, n. 3 (March 2015).
- (2019): Characteristics analysis of granular landslide using shaking table model test. In: Soil Dynamics and Earthquake Engineering, v. 126 (November 2019).
- (2016): Experimental investigation and mechanism analysis of novel multi-self-healing behaviors of bitumen using microcapsules containing rejuvenator. In: Construction and Building Materials, v. 106 (March 2016).
- (2017): Experimental observation of the self-healing microcapsules containing rejuvenator states in asphalt binder. In: Construction and Building Materials, v. 147 (August 2017).
Structurae cooperates with
