Lei Yang 
- (2024): Optimizing carbonation efficiency and mechanical properties of low-calcium cementitious materials with MgSO4 addition. In: Construction and Building Materials, v. 454 (December 2024).
- (2025): Low-velocity impact behaviors of TFMLs in hydrothermal and thermal-cycling environments. In: Composite Structures, v. 354 (January 2025).
- (2025): Improved energy absorption and mechanical properties of porous Ti-6Al-4V alloys with gradients disordered cell fabricated via laser powder bed fusion. In: Engineering Structures, v. 326 (March 2025).
- (2024): Mechanical response, damage constitutive and failure localization characteristics of structural backfills composed of matrixes with different mechanical properties. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Mechanical characteristics of Si/SiC graded ceramic lattice structures with a triply periodic minimal surface fabricated by laser powder bed fusion. In: Composite Structures, v. 346 (October 2024).
- : Modeling and designing of a phased array comprising piezoelectric stack transducer for ultrasonic Lamb wave-based damage detection. In: Structural Health Monitoring.
- (2024): Multi-frequency probabilistic imaging fusion for impact localization on aircraft composite structures. In: Structural Health Monitoring, v. 24, n. 1 (February 2024).
- (2024): Impact of microwave radiation on recycled concrete powder in cement-based materials: Structure, hydration activity and mechanism. In: Journal of Building Engineering, v. 86 (June 2024).
- (2024): A novel water-swelling grouting material formulation and its performance for water rushing in karst strata. In: Construction and Building Materials, v. 416 (February 2024).
- (2024): Mechanical behavior, acoustic emission and principal strain field evolution properties of layered cemented paste backfill under unconfined compression. In: Construction and Building Materials, v. 415 (February 2024).
- (2024): The impact of original aggregate and attached mortar types of recycled aggregates on the sulfuric acid resistance of geopolymer recycled concrete. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Microwave hydrothermal synthesis of tobermorite for the solidification of iron. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Multi-scale triple-attention network for pixelwise crack segmentation. In: Automation in Construction, v. 150 (June 2023).
- (2023): Performance investigation of blast furnace slag based cemented paste backfill under low temperature and low atmospheric pressure. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Multi-impact performance of prestressed CFRP-strengthened RC beams using H-typed end anchors. In: Marine Structures, v. 85 (September 2022).
- (2021): Microwave curing cement-fly ash blended paste. In: Construction and Building Materials, v. 282 (May 2021).
- (2021): Mix design and rheological properties of magnesium potassium phosphate cement composites based on the 3D printing extrusion system. In: Construction and Building Materials, v. 284 (May 2021).
- (2022): Investigation of Fracture Performance and Interface Stress Behavior of Zn–Zn-Al Multilayer Coating–304 Stainless Steel Substrate System. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 3 (March 2022).
- (2022): Microwave preparation and carbonation properties of low-carbon cement. In: Construction and Building Materials, v. 320 (February 2022).
- (2021): Investigation on the mechanical properties of CSA cement-based coating and its application. In: Construction and Building Materials, v. 305 (October 2021).
- (2017): Integrated impedance and Lamb wave–based structural health monitoring strategy for long-term cycle-loaded composite structure. In: Structural Health Monitoring, v. 17, n. 4 (July 2017).
- (2020): Modification of Lime-Fly Ash-Crushed Stone with Phosphogypsum for Road Base. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Low-velocity impact behaviors of a fully thermoplastic composite laminate fabricated with an innovative acrylic resin. In: Composite Structures, v. 250 (October 2020).
- (2019): A new constitutive model for steel fibre reinforced concrete subjected to dynamic loads. In: Composite Structures, v. 221 (August 2019).
- (2020): Passive wireless sensors based on spark plasma sintering for ultra-high temperature measurements. In: Smart Materials and Structures, v. 29, n. 11 (September 2020).
- (2020): Influence of water removal techniques on the composition and microstructure of hardened calcium sulfoaluminate cement pastes. In: Materials and Structures, v. 53, n. 4 (26 June 2020).
- (2013): Physical filling effect of aggregate micro fines in cement concrete. In: Construction and Building Materials, v. 41 (April 2013).
- (2014): Identification of dynamic displacements and modal frequencies of a medium-span suspension bridge using multimode GNSS processing. In: Engineering Structures, v. 81 (December 2014).
- (2018): Influence of dry ice on the performance of Portland cement and its mechanism. In: Construction and Building Materials, v. 188 (November 2018).
- (2018): Healing Technique for Rock Cracks Based on Microbiologically Induced Calcium Carbonate Mineralization. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (November 2018).
Structurae cooperates with
