Keun-Hyeok Yang 
- (2015): ALC 블록성능의 기포콘크리트 배합설계 연구 (Foamed Concrete with a New Mixture Proportioning Method Comparable to the Quality of Conventional ALC Block). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 15, n. 1 (February 2015).
- (2023): Cost and CO2 emission of concrete incorporating pretreated coal bottom ash as fine aggregate: A case study. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Compressive and flexural toughness indices of lightweight aggregate concrete reinforced with micro-steel fibers. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): Actual NOX and SOX removal rates in the atmospheric environment of concrete permeable blocks containing TiO2 powders, coconut shell powders, and zeolite beads. In: Construction and Building Materials, v. 403 (November 2023).
- (2022): Effect of halophilic bacteria on reducing chloride-ion concentration in mortars. In: Construction and Building Materials, v. 351 (October 2022).
- (2022): Axial and Shear Behavior of Prestressed Damping Isolation Units Using a Spring and Rubbers. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2021): Effect of concrete unit weight on the mechanical properties of bottom ash aggregate concrete. In: Construction and Building Materials, v. 273 (March 2021).
- (2022): Effect of concrete type on equivalent lateral confinement pressure in columns under axial loads. In: Journal of Building Engineering, v. 47 (April 2022).
- (2021): Efficiency of dry calcination and trituration treatments for removing cement pastes attached to recycled coarse aggregates. In: Construction and Building Materials, v. 312 (December 2021).
- (2021): Compressive Stress-Strain Model for Confined Lightweight Concrete Based on Brittleness Number. In: KSCE Journal of Civil Engineering, v. 25, n. 8 (June 2021).
- (2021): Axial and flexural performances of columns restored after severe damage. In: Journal of Building Engineering, v. 44 (December 2021).
- (2011): Aggregate interlock in lightweight concrete continuous deep beams. In: Engineering Structures, v. 33, n. 1 (January 2011).
- (2020): Axial performance of RC columns strengthened with different jacketing methods. In: Engineering Structures, v. 206 (March 2020).
- (2007): Development of a cementless mortar using hwangtoh binder. In: Building and Environment, v. 42, n. 10 (October 2007).
- (2019): Axial Behavior of Reinforced Concrete Columns Strengthened with New Section Enlargement Approaches. In: ACI Structural Journal, v. 116, n. 5 (September 2019).
- (2020): Axial Test of Full-Scale Columns Strengthened with Jacket Section. In: Magazine of Concrete Research, v. 72, n. 19 (October 2020).
- (2019): Effect of Sand Content on the Workability and Mechanical Properties of Concrete Using Bottom Ash and Dredged Soil-based Artificial Lightweight Aggregates. In: International Journal of Concrete Structures and Materials, v. 13, n. 1 (January 2019).
- (2009): Development of Geopolymer Concrete with Mixing Condition. Presented at: IABSE Symposium: Sustainable Infrastructure - Environment Friendly, Safe and Resource Efficient, Bangkok, Thailand, 9-11 September 2009.
- (2014): Effects of Aggregate and Specimen Sizes on Lightweight Concrete Fracture Energy. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 5 (May 2014).
- (2011): Effect of Water Content on the Properties of Lightweight Alkali-Activated Slag Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 6 (June 2011).
- (2010): Effects of Water-Binder Ratio and Fine Aggregate–Total Aggregate Ratio on the Properties of Hwangtoh-Based Alkali-Activated Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 9 (September 2010).
- (2016): Axial Compression Performance of Reinforced Concrete Short Columns with Supplementary V-Shaped Ties. In: ACI Structural Journal, v. 113, n. 6 (November 2016).
- (2012): Effect of water–binder ratio on the mechanical properties of calcium hydroxide-based alkali-activated slag concrete. In: Construction and Building Materials, v. 29 (April 2012).
- (2014): Direct tensile strength of lightweight concrete with different specimen depths and aggregate sizes. In: Construction and Building Materials, v. 63 (July 2014).
- (2016): Development of a neutral cementitious material to promote vegetation concrete. In: Construction and Building Materials, v. 127 (November 2016).
- (2019): Durability and purification performance of concrete impregnated with silicate and sprayed with photocatalytic TiO2. In: Construction and Building Materials, v. 199 (February 2019).
- (2016): Displacement ductility ratio-based flexural design approach of reinforced concrete slender shear walls. In: Magazine of Concrete Research, v. 68, n. 8 (April 2016).
- (2016): Cyclic flexural tests of hybrid steel–precast concrete beams with simple connection elements. In: Engineering Structures, v. 118 (July 2016).
- (2017): Cyclic tests on slip resistance of squat heavyweight concrete shear walls with construction joints. In: Engineering Structures, v. 141 (June 2017).
- (2016): Comparison of Strength–Maturity Models Accounting for Hydration Heat in Massive Walls. In: International Journal of Concrete Structures and Materials, v. 10, n. 1 (March 2016).
Structurae cooperates with
