Ke Yang 
- (2025): Enhancing Electron Utilization and Sulfamethoxazole Degradation in Microbial Electrochemical Systems Using MnCo2O4 Modified Electrodes. In: Journal of Environmental Engineering (ASCE), v. 151, n. 1 (January 2025).
- (2024): Effects of Soil–Structure Interaction on the Seismic Response of RC Frame–Shear Wall Building Structures Under Far-Field Long-Period Ground Motions. In: Buildings, v. 14, n. 12 (18 December 2024).
- (2025): Optimized the performance of conductive mortar with hybrid fiber and steel-slag via RSM and MOPSO. In: Construction and Building Materials, v. 459 (January 2025).
- (2024): Performance evaluation of waterborne epoxy emulsified asphalt micro-surfacing with microwave-activated waste rubber powder. In: Construction and Building Materials, v. 413 (January 2024).
- (2024): Influence of mixing time and coarse aggregate content on the flowability, setting time, and mechanical properties of cemented backfill. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Experimental Study on the Characteristics of Energy Accumulation before Peak in Coal Rock Combinations with Different Dip Angles. In: KSCE Journal of Civil Engineering, v. 28, n. 9 (23 July 2024).
- (2024): Enhancing the High-Temperature Fracture Toughness of Ultrahigh-Performance Concrete through Optimization of Ternary Cement Matrix and Plastic Fiber Geometric Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (October 2024).
- (2024): Optimizing mechanical performance and flow characteristics of alkaline fly ash/rice husk ash composite backfill: Insights from multi-factor analysis and engineering optimization. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Enhancing performance and structural integrity of cemented paste backfill: Rheological behavior, strength characteristics, and microstructural dynamics. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Enhancing workability, strength, and microstructure of cemented tailings backfill through mineral admixtures and fibers. In: Journal of Building Engineering, v. 84 (May 2024).
- (2024): Characterization and Environmental Risk Assessment of Coal-based Solid Waste Towards Underground Backfilling. In: KSCE Journal of Civil Engineering, v. 28, n. 4 (January 2024).
- (2023): Experimental study on mechanical properties, microstructure and ratio parameter optimization of mixed fiber-reinforced rubber cemented coarse aggregate backfill. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Ship hull surface reconstruction from scattered points cloud using an RBF neural network mapping technology. In: Computers & Structures, v. 281 (June 2023).
- (2023): Bond-slip behavior between multi-partition steel tubes and concrete. In: Materials and Structures, v. 56, n. 3 (3 March 2023).
- (2023): Study on mechanical properties and damage characteristics of coal-based solid waste cemented backfill. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Mechanical Properties and Anchorage Angle Optimization of Rock Mass with a Weak Intercalated Layer. In: KSCE Journal of Civil Engineering, v. 26, n. 3 (14 January 2022).
- (2021): Characteristics of early-damaged cement stone and the creep behavior after damage. In: Construction and Building Materials, v. 303 (October 2021).
- (2021): Effects of the major principal stress direction respect to the long axis of a tunnel on the tunnel stability: Physical model tests and numerical simulation. In: Tunnelling and Underground Space Technology, v. 114 (August 2021).
- (2021): Permeability Enhancement and Gas Drainage Effect in Deep High Gassy Coal Seams via Long-Distance Pressure Relief Mining: A Case Study. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2019): Experimental investigation on the thermal performance of a vertical greening system with green roof in wet and cold climates during winter. In: Energy and Buildings, v. 183 (January 2019).
- (2019): Modeling multiple failures of composite box beams used in wind turbine blades. In: Composite Structures, v. 217 (June 2019).
- (2018): Design and nonlinear structural responses of multi-bolted joint composite box-beam for sectional wind turbine blades. In: Composite Structures, v. 206 (December 2018).
- (2020): Experimental Research on the Mechanical Characteristics and the Failure Mechanism of Coal-Rock Composite under Uniaxial Load. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Investigation of Energy and Damage Evolutions in Rock Specimens with Large-Scale Inclined Prefabricated Cracks by Uniaxial Compression Test and AE Monitoring. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Influence of NaOH content on the alkali conversion mechanism in MSWI bottom ash alkali-activated mortars. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Use of pretreatment to prevent expansion and foaming in high-performance MSWI bottom ash alkali-activated mortars. In: Construction and Building Materials, v. 245 (June 2020).
- (2003): Analytical Solution for Fluid-Structure Interaction in Liquid-Filled Pipes Subjected to Impact-Induced Water Hammer. In: Journal of Engineering Mechanics (ASCE), v. 129, n. 12 (December 2003).
- (2016): Effects of vortex generators on aerodynamic performance of thick wind turbine airfoils. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 156 (September 2016).
- (2014): A variational solution for nonlinear response of laterally loaded piles with elasto-plastic winkler spring model. In: KSCE Journal of Civil Engineering, v. 19, n. 1 (July 2014).
- (2018): Numerical and Experimental Investigation of Interactions Between Free-Surface Waves and A Floating Breakwater with Cylindrical-Dual/Rectangular-Single Pontoon. In: China Ocean Engineering, v. 32, n. 4 (August 2018).
Structurae cooperates with
