Jin Yang 
- (2024): Performance enhancement of cement mortar with superabsorbent polymer composite internally embedded with porous ceramsite sand. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Recycling of fly ash and carbide slag in low-carbon cement composites by pre-depolymerization and pre-dissolution treatment. In: Journal of Building Engineering, v. 98 (December 2024).
- (2024): Rheological properties and shrinkage crack resistance of welan gum-modified cementitious materials. In: Construction and Building Materials, v. 441 (August 2024).
- (2024): Properties and microstructure of a low-carbon clinker-free cementitious binder and its extrusion-based printing performance. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): Nano-micron soda residue as green nucleation seeding additive for silicate cement. In: Construction and Building Materials, v. 419 (March 2024).
- (2023): Potential industrial approach for efficient dispersion of silica fume: Rapid wet-grinding dispersion technique. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): On the factors affecting the swelling behavior of superabsorbent polymers in cement-related environment. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Sodium Oleate and Styrene-Acrylate Copolymer Emulsion-Modified Cement Mortar: Functional Combination of Physical Barrier and Hydrophobicity. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 8 (August 2023).
- (2016): Influence of superabsorbent polymers on the surrounding cement paste. In: Cement and Concrete Research, v. 81 (March 2016).
- (2023): Multi-solid waste collaborative production of clinker-free cemented iron tailings backfill material with ultra-low binder-tailing ratio. In: Construction and Building Materials, v. 367 (February 2023).
- (2023): Performances and microstructure of one-part fly ash geopolymer activated by calcium carbide slag and sodium metasilicate powder. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): Improvement in flexural strength of Portland cement by lamellar structured montmorillonite. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Nano C-S-H seeds prepared from ground granulated blast-furnace slag-carbide slag and its application in Portland cement. In: Construction and Building Materials, v. 329 (April 2022).
- (2021): Improving durability of heat-cured high volume fly ash cement mortar by wet-grinding activation. In: Construction and Building Materials, v. 289 (June 2021).
- (2023): A novel early strength agent prepared by wet-grinding concrete waste slurry and its effect on early hydration and mechanical properties of cement based materials. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Recycling of plastic waste concrete to prepare an effective additive for early strength and late permeability improvement of cement paste. In: Construction and Building Materials, v. 347 (September 2022).
- (2021): Preparation of nano cement particles by wet-grinding and its effect on hydration of cementitious system. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Heat-cured cement-based composites with wet-grinded fly ash and carbide slag slurry: Hydration, compressive strength and carbonation. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): A quantitative study on the exterior wall texture of stone-built dwellings in traditional villages in China: A case study of the xisuo village in the Jiarong Tibetan area. In: Journal of Building Engineering, v. 42 (October 2021).
- (2005): On-line building energy prediction using adaptive artificial neural networks. In: Energy and Buildings, v. 37, n. 12 (December 2005).
- (2020): Shrinkage properties and microstructure of high volume ultrafine phosphorous slag blended cement mortars with superabsorbent polymer. In: Journal of Building Engineering, v. 29 (May 2020).
- (2018): Self-hydration characteristics of ground granulated blast-furnace slag (GGBFS) by wet-grinding treatment. In: Construction and Building Materials, v. 167 (April 2018).
- (2019): Segmented fractal pore structure covering nano- and micro-ranges in cementing composites produced with GGBS. In: Construction and Building Materials, v. 225 (November 2019).
- (2019): Influence of components properties on sealing ability of cementing isolation system in deep-water shallow formation. In: Construction and Building Materials, v. 204 (April 2019).
- (2019): Influence of assumed absorption capacity of superabsorbent polymers on the microstructure and performance of cement mortars. In: Construction and Building Materials, v. 204 (April 2019).
- (2016): Photocatalytic activity of Portland cement loaded with 3D hierarchical Bi 2 WO 6 microspheres under visible light. In: Construction and Building Materials, v. 120 (September 2016).
- (2018): Hydrophobic and water-resisting behavior of Portland cement incorporated by oleic acid modified fly ash. In: Materials and Structures, v. 51, n. 2 (April 2018).
- (2017): Performance evaluation of the current construction of the Great Wall of China in Jinshanling: using a fuzzy system. In: Civil Engineering and Environmental Systems, v. 34, n. 3-4 (October 2017).
- (2018): Investigation of construction techniques used for the foundation of the Taj Mahal in India. In: Proceedings of the Institution of Civil Engineers - Engineering History and Heritage, v. 171, n. 3 (August 2018).
Structurae cooperates with
