Jian Yang 
- (2024): Microbial pollution assessment in semi-exposed relics: A case study of the K9901 Pit of the Mausoleum of Emperor Qin Shihuang. In: Building and Environment, v. 262 (August 2024).
- (2024): Investigation of a dexterous actuator integrated with magnetorheological bearings towards high switching frequency and fast response. In: Smart Materials and Structures, v. 33, n. 6 (May 2024).
- (2024): Insights into the fracture properties of recycled ceramic and rubber composite cement-based materials: Fracture mechanics, acoustic emission, and digital image correlation. In: Construction and Building Materials, v. 435 (July 2024).
- (2020): Mechanical performance of concrete-filled square steel tube stiffened with PBL subjected to eccentric compressive loads: Experimental study and numerical simulation. In: Thin-Walled Structures, v. 149 (April 2020).
- (2024): A multi-directional and multi-modal galloping piezoelectric energy harvester with tri-section beam. In: Smart Materials and Structures, v. 33, n. 3 (2 February 2024).
- (2024): Multi-scale study on steel fiber reinforcement mechanism and uniaxial tension constitutive relationship of UHPFRC containing stone powder. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): A multi-scale investigation on recycled ceramic and rubber composite cement-based materials: Acoustic emission, NMR, molecular dynamics simulation. In: Construction and Building Materials, v. 412 (January 2024).
- (2023): Modeling the Compression Behavior of Dredged Sandy Clays Considering the Effect of Initial Water Contents and Sand Fractions. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Investigation of Ultrahigh-Performance Concrete Fracture Characteristics with Different Steel Fiber Fractions Based on Acoustic Emission. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Multiscale assessment of performance of limestone calcined clay cement (LC3) reinforced with virgin and recycled carbon fibers. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Investigation of a magnetorheological elastomer metamaterial sandwich beam with tunable graded stiffness for broadband vibration attenuation. In: Smart Materials and Structures, v. 32, n. 6 (21 April 2023).
- (2023): Model for calculating local bearing capacity of concrete with spiral stirrups. In: Construction and Building Materials, v. 389 (July 2023).
- (2022): New magnetorheological engine mount with controllable stiffness characteristics towards improved driving stability and ride comfort. In: Smart Materials and Structures, v. 31, n. 12 (10 November 2022).
- (2022): Method for calculating local bearing capacity of concrete under bond stress from reinforcement in straight anchor section. In: Structures, v. 46 (December 2022).
- (2022): Key Construction Technology of Single Tower Suspension Bridge. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2021): Insights into the microstructure evolution of slag, fly ash and condensed silica fume in blended cement paste. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Investigatio n into short term behaviors of embedded laminated glass connections with various configurations. In: Construction and Building Materials, v. 297 (August 2021).
- (2022): Multi-scale modeling and numerical analysis of sandwich beams with FG auxetic 3D lattice cores and GRC face sheets subjected to drop-weight impacts. In: Engineering Structures, v. 265 (August 2022).
- (2022): Investigation of failure mechanism of cement-fiber-tailings matrix composites using digital image correlation and acoustic emission. In: Construction and Building Materials, v. 335 (June 2022).
- (2022): Investigation of the Structural Behaviour of RC Beam-Column Sub-frame Subjected to Progressive Collapse. In: KSCE Journal of Civil Engineering, v. 26, n. 4 (January 2022).
- (2022): Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Influence of steel fiber on compressive properties of ultra-high performance fiber-reinforced concrete. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Investigation of Corrosion Resistance and Interfacial Bonding Properties of Zn/Zn–Al Multilayer Coating/Steel Substrate System. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (January 2021).
- (2002): Interfacial stresses in plated beams with cracks. In: Composite Structures, v. 57, n. 1-4 (July 2002).
- (2018): Ionic transport features in concrete composites containing various shaped aggregates: a numerical study. In: Composite Structures, v. 183 (January 2018).
- (2019): Multi-phase modelling of electrochemical rehabilitation for ASR and chloride affected concrete composites. In: Composite Structures, v. 207 (January 2019).
- (2016): Investigation on SCFs of concrete-filled circular chord and square braces K-joints under balanced axial loading. In: Steel and Composite Structures, v. 21, n. 6 ( 2016).
- (2018): Mechanical properties of zinc-aluminum film on steel cable substrate in corrosion environment. In: Journal of Constructional Steel Research, v. 150 (November 2018).
- (2012): Multi-phase modelling of ionic transport in concrete when subjected to an externally applied electric field. In: Engineering Structures, v. 42 (September 2012).
- (2016): An innovative MRE absorber with double natural frequencies for wide frequency bandwidth vibration absorption. In: Smart Materials and Structures, v. 25, n. 5 (May 2016).
Structurae cooperates with
