Jun Yan 
- (2024): Microstructure and properties of high-strength lightweight ceramsites customised with ultra-fine copper tailings. In: Construction and Building Materials, v. 429 (May 2024).
- (2024): Study on equivalent mechanical properties of U-shaped bellows based on novel implementation of asymptotic homogenization method. In: Marine Structures, v. 96 (July 2024).
- (2024): Cross-sectional layout optimization of the umbilical based on the quasi-physical algorithm. In: Marine Structures, v. 96 (July 2024).
- (2023): Attack resistance mechanism, uniaxial compressive mechanical properties and meso-simulation of high-performance concrete exposed to brine in salt lake for 10 years. In: Construction and Building Materials, v. 407 (December 2023).
- (2024): Dynamic responses analysis of crane-blade coupling system for the single blade installation of offshore wind turbine considering the wind effect. In: Marine Structures, v. 94 (March 2024).
- (2023): Study on competition mechanism of deformation modes of U-shaped bellows under internal pressure. In: Marine Structures, v. 92 (November 2023).
- (2023): Dynamic response of foam-filled X-type sandwich beam under low-velocity impact. In: Engineering Structures, v. 292 (October 2023).
- (2023): Real-Time structure topology optimization using CNN driven Moving Morphable component method. In: Engineering Structures, v. 290 (September 2023).
- (2023): Concurrent multi-material and multi-scale design optimization of fiber-reinforced composite material and structures for minimum structural compliance. In: Composite Structures, v. 311 (May 2023).
- (2022): Experimental Study on Seismic Performance Improvement of Pile-Cap Joints in a Prestressed Concrete Solid Square Pile Using a Snap-In Mechanical Connection. In: Journal of Earthquake Engineering, v. 27, n. 11 (September 2022).
- (2022): Expansion and mechanical properties of high-performance concrete with ASR inhibition measures exposed to alkaline solution at 38℃ for 10 years. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Full uniaxial compressive stress–strain curve of high-performance concrete with ASR inhibition measures exposed to lye solution at 38 °C for 10 years. In: Construction and Building Materials, v. 351 (October 2022).
- (2021): Effects of nano-SiO2 coated multi-walled carbon nanotubes on mechanical properties of cement-based composites. In: Construction and Building Materials, v. 281 (April 2021).
- (2016): Analysis of the Case of Fire Fighters Casualties in the Building Collapse. In: Procedia Engineering, v. 135 ( 2016).
- (2022): Role of Grouped Piles on Flow Characteristics Around Impermeable Spur Dike. In: International Journal of Civil Engineering, v. 20, n. 8 (April 2022).
- (2022): Investigating the effect of polycarboxylate-ether based superplasticizer on the microstructure of cement paste during the setting process. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Structural Topology Design Optimization of Fiber-Reinforced Composite Frames with Fundamental Frequency Constraints. In: Journal of Structural Engineering (ASCE), v. 148, n. 4 (April 2022).
- (2021): Experimental study on the interlayer friction and wear mechanism between armor wires of umbilicals. In: Marine Structures, v. 80 (November 2021).
- (2021): Numerical simulation with a macroscopic CFD method and experimental analysis of wave interaction with fixed porous cylinder structures. In: Marine Structures, v. 80 (November 2021).
- (2021): Analysis and prediction of fire water pressure in buildings based on IoT data. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Experimental Study on Magnesium Sulfate Cement Concrete Splices of Widened Box Girder. In: KSCE Journal of Civil Engineering, v. 25, n. 12 (September 2021).
- (2021): Research on Surface Subsidence of Long-Span Underground Tunnel. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Acoustic emission behavior of polyvinyl alcohol (PVA) fiber reinforced calcium sulphoaluminate cement mortar under flexural load. In: Journal of Building Engineering, v. 40 (August 2021).
- (2021): Integrated optimisation design of a dynamic umbilical based on an approximate model. In: Marine Structures, v. 78 (July 2021).
- (2021): Seismic internal stability of bilinear geosynthetic-reinforced slopes with cohesive backfills. In: Soil Dynamics and Earthquake Engineering, v. 143 (April 2021).
- (2021): Research on the Seismic Performance of the Prefabricated Reinforced Concrete Column with Steel Mortise and Tenon Connections. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2020): Dynamic compaction of a thick soil-stone fill: Dynamic response and strengthening mechanisms. In: Soil Dynamics and Earthquake Engineering, v. 129 (February 2020).
- (2008): Optimum structure with homogeneous optimum truss-like material. In: Computers & Structures, v. 86, n. 13-14 (July 2008).
- (2017): A comparative study of three composite implicit schemes on structural dynamic and wave propagation analysis. In: Computers & Structures, v. 190 (1 October 2017).
- (2015): Evaluation of ethylene–acrylic acid copolymer (EAA)-modified asphalt: Fundamental investigations on mechanical and rheological properties. In: Construction and Building Materials, v. 90 (August 2015).
Structurae cooperates with
