Dongming Yan 
- (2024): EIS investigation on electrical properties of metakaolin-based geopolymer. In: Construction and Building Materials, v. 437 (July 2024).
- (2010): Condition Assessment of Bill Emerson Memorial Cable-Stayed Bridge under Postulated Design Earthquake. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2172, n. 1 (January 2010).
- (2024): Identification of indexes that could reflect early drying shrinkage of high strength concrete with minerals. In: Construction and Building Materials, v. 420 (March 2024).
- (2024): Anti-corrosion behavior of magnesium phosphate (Mg–P) coatings after exposure to elevated temperatures. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Effect of organosilicone on the reaction process of functionalized geopolymers. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Early-age shrinkage behavior of cement-fly ash paste under wind speeds: A study using BSE-IA and MIP techniques. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): Effects of kaolin-modified superabsorbent polymers on mortar properties. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Dynamic self-balanced electrochemical model for non-uniform corrosion of steel reinforcement in concrete under combined effects of heat-moisture-chlorine-oxygen. In: Journal of Building Engineering, v. 80 (December 2023).
- (2023): Corrosion damages of reinforced concrete characterized by X-ray CT and DVC techniques. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Dynamic Electrochemical Model of Steel Corrosion in Concrete Microenvironment under Multifield Action of Heat-Moisture-Chlorine. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (January 2024).
- (2006): Dynamic properties of concrete in direct tension. In: Cement and Concrete Research, v. 36, n. 7 (July 2006).
- (2023): Effects of Ca(OH)2 on the reinforcement corrosion of sulfoaluminate cement mortar. In: Materials and Structures, v. 56, n. 1 (30 January 2023).
- (2023): Analytical bond strength of deformed bars in concrete confined with transverse reinforcement and FRP. In: Engineering Structures, v. 280 (April 2023).
- (2022): Effects of red mud on workability and mechanical properties of autoclaved aerated concrete (AAC). In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Influence of Coarse Aggregate Size on the Bonding between CFRP Sheets and Metakaolin-Based Geopolymer Concrete and Ordinary Concrete. In: Journal of Composites for Construction, v. 26, n. 2 (April 2022).
- (2021): Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (December 2021).
- (2021): Effect of Silica Moduli on the Thermal Degradation Mechanisms of Fly Ash–Based Geopolymer Mortars. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (May 2021).
- (2020): Effect of aggregates spatial distribution on three-dimensional transport of chloride ions in reinforced concrete. In: Construction and Building Materials, v. 259 (October 2020).
- (2021): Early-stage geopolymerization revealed by 27Al and 29Si nuclear magnetic resonance spectroscopy based on vacuum dehydration. In: Construction and Building Materials, v. 266 (January 2021).
- (2020): A comparison study on the natural and half-soaking galvanic accelerated corrosion of reinforced concrete based on an improved electrochemical model. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Effect of eccentricity on retrofitting efficiency of basalt textile reinforced concrete on partially damaged masonry columns. In: Composite Structures, v. 232 (January 2020).
- (2020): Effects of Activator Types on Degradation Mechanisms of Metakaolin Geopolymer Mortars Exposed to High Temperature. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 12 (December 2020).
- (2020): Effect of sintering temperature on the microstructure, corrosion resistance and crack susceptibility of chemically reactive enamel (CRE) coating. In: Construction and Building Materials, v. 238 (March 2020).
- (2013): Flexural properties after exposure to elevated temperatures of a ground granulated blast furnace slag concrete incorporating steel fibers and polypropylene fibers. In: Fire and Materials, v. 38, n. 5 (July 2013).
- (2019): Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (November 2019).
- (2011): Blast Test of Full-Size Wall Barriers Reinforced with Enamel-Coated Steel Rebar. Presented at: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2012): Effect of chemically reactive enamel coating on bonding strength at steel/mortar interface. In: Construction and Building Materials, v. 28 (March 2012).
- (2016): Chloride penetration into concrete damaged by uniaxial tensile fatigue loading. In: Construction and Building Materials, v. 125 (October 2016).
- (2017): An experimental investigation of pre-loading effects on the dynamic behaviour of concrete. In: Magazine of Concrete Research, v. 69, n. 11 (June 2017).
- (2014): Biaxial behaviour of plain concrete subjected to dynamic compression with constant lateral stress. In: Structural Concrete, v. 15, n. 2 (June 2014).
Structurae cooperates with
