Chuanqi Yan 
- (2025): Investigation of the rheological properties and aging performance of rock asphalt/thermoplastic polyurethane composite modified asphalt. In: Construction and Building Materials, v. 458 (January 2025).
- (2024): Rheological and adhesive improvements of terminal blend rubberized asphalt via fumed silica nanoparticle modification. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Investigation of anti-aging performance in nano-sol modified high-SBS content emulsified asphalt and its micro-surfacing mixtures. In: Construction and Building Materials, v. 453 (November 2024).
- (2024): Investigating the influence of stress dependency on the evaluation of high-temperature deformation resistance in SBS-modified asphalt. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Investigation of key morphological parameters of pores in different grades of asphalt mixture based on CT scanning technology. In: Construction and Building Materials, v. 434 (July 2024).
- (2023): Characterizing ZSV of SBS modified asphalt using shear rate sweep test and frequency sweep oscillation test. In: Construction and Building Materials, v. 371 (March 2023).
- (2023): Influence of fumed silica nanoparticles on the rheological and anti-aging properties of bitumen. In: Construction and Building Materials, v. 397 (September 2023).
- (2023): Performance and Mechanism of Using Low-Cost Fumed Silica Nanoparticles in Enhancing High Viscosity Modified Asphalt. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Evaluating the Cracking Resistance of the Semiflexible Pavement Mixture Using the Semicircular Bending Test. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Influence of the Instrumental Inertia Effect on the Asphalt Binder Oscillation Measurement. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (July 2023).
- (2022): Characterization of various modified asphalts using force ductility test with “8“ shaped mold and straight mold. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Characterizing the fatigue resistance of multiple modified asphalts using time sweep test, LAS test and elastic recovery test. In: Construction and Building Materials, v. 322 (March 2022).
- (2021): Investigation on the durability of OGFC-5 ultra-thin friction course with different mixes. In: Construction and Building Materials, v. 288 (June 2021).
- (2021): Evaluation of the terminal blend crumb rubber/SBS composite modified asphalt. In: Construction and Building Materials, v. 278 (April 2021).
- (2021): Investigating binder aging during hot in-place recycling (HIR) of asphalt pavement. In: Construction and Building Materials, v. 276 (March 2021).
- (2022): Evaluation of the moisture resistance of rubberized asphalt using BBS/UTM bonding test, TSR and HWT test. In: Construction and Building Materials, v. 340 (July 2022).
- (2022): Effect of the laboratory short-term aging temperature on the chemical and rheological characteristics of high modulus asphalts. In: Construction and Building Materials, v. 314 (January 2022).
- (2020): Investigating the asphalt binder/mastic bonding healing behavior using bitumen bonding strength test and X-ray Computed Tomography scan. In: Construction and Building Materials, v. 257 (October 2020).
- (2021): Evaluation of open-grade friction course (OGFC) mixtures with high content SBS polymer modified asphalt. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Evaluating four typical fibers used for OGFC mixture modification regarding drainage, raveling, rutting and fatigue resistance. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Influence of different high viscosity modifiers on the aging behaviors of SBSMA. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Laboratory Evaluation of the Effects of Long-Term Aging on High-Content Polymer-Modified Asphalt Binder. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 7 (July 2020).
- (2020): Comparison between SCB-IFIT, un-notched SCB-IFIT and IDEAL-CT for measuring cracking resistance of asphalt mixtures. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Evaluation of the adhesion and healing properties of modified asphalt binders. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Characterizing the SBS polymer degradation within high content polymer modified asphalt using ATR-FTIR. In: Construction and Building Materials, v. 233 (February 2020).
- (2020): Influence of gradation on asphalt mix rutting resistance measured by Hamburg Wheel Tracking test. In: Construction and Building Materials, v. 238 (March 2020).
- (2019): Rheological, chemical and aging characteristics of high content polymer modified asphalt. In: Construction and Building Materials, v. 207 (May 2019).
- (2019): Investigation of the rutting performance of various modified asphalt mixtures using the Hamburg Wheel-Tracking Device test and Multiple Stress Creep Recovery test. In: Construction and Building Materials, v. 206 (May 2019).
- (2019): Chemical and rheological evaluation of aging characteristics of terminal blend rubberized asphalt binder. In: Construction and Building Materials, v. 205 (April 2019).
- (2017): Evaluation of the temperature effect on Rolling Thin Film Oven aging for polymer modified asphalt. In: Construction and Building Materials, v. 137 (April 2017).
Structurae cooperates with
