Ying Xu 
- (2021): Research on the progressive collapse resistance of single-layer cylindrical latticed shells with AH joints. In: Thin-Walled Structures, v. 158 (January 2021).
- (2024): Semivolatile organic compounds in U.S. high schools: Concentrations and associations with building characteristics and seasonal variations. In: Building and Environment, v. 254 (April 2024).
- (2024): Research on anti-shear performance of waterproof adhesive layer (WAL) in polyurethane-mixture steel-bridge pavement structure. In: Construction and Building Materials, v. 417 (February 2024).
- (2023): Radial microbial grouting method by intubation for sandy soil reinforcement: Experimental and numerical investigation. In: Construction and Building Materials, v. 375 (April 2023).
- (2023): Research on bearing behavior of secant piled bucket foundation for onshore wind turbines. In: Structures, v. 58 (December 2023).
- (2023): Terahertz Non-destructive testing and imaging of corrosion in coated steel plates. In: Construction and Building Materials, v. 385 (July 2023).
- (2023): Support condition monitoring of monopile-supported offshore wind turbines in layered soil based on model updating. In: Marine Structures, v. 87 (January 2023).
- (2022): Study on the mechanical performances of aluminum assembled hub joints under axial loads. In: Journal of Building Engineering, v. 50 (June 2022).
- (2021): A three-stage online anomaly identification model for monitoring data in dams. In: Structural Health Monitoring, v. 21, n. 3 (August 2021).
- (2021): A risk-based optimal pressure relief opening design for gas explosions in underground utility tunnels. In: Tunnelling and Underground Space Technology, v. 116 (October 2021).
- (2021): Study on the bending performance of aluminum assembled hub joints. In: Engineering Structures, v. 243 (September 2021).
- (2019): Support condition monitoring of offshore wind turbines using model updating techniques. In: Structural Health Monitoring, v. 19, n. 4 (September 2019).
- (2013): Residential thermal environment in cold climates at high altitudes and building energy use implications. In: Energy and Buildings, v. 62 (July 2013).
- (2020): A Study on Cut Blasting with Large Diameter Charges in Hard Rock Roadways. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Study on improving the consolidation properties of microbial cementitious material by promoting spore germination ratio. In: Construction and Building Materials, v. 252 (August 2020).
- (2016): A reference method for measuring emissions of SVOCs in small chambers. In: Building and Environment, v. 95 (January 2016).
- (2013): Quasi-static axial compression of triangular steel tubes. In: Thin-Walled Structures, v. 62 (January 2013).
- (2016): Stiffness characteristics of joints and influence on the stability of single-layer latticed domes. In: Thin-Walled Structures, v. 107 (October 2016).
- (2020): A review on effects of different factors on gas explosions in underground structures. In: Underground Space, v. 5, n. 4 (December 2020).
- (2019): Tension-Compression Damage Model with Consistent Crack Bandwidths for Concrete Materials. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2017): Thermal degradation of dynamic compressive strength for two mortars. In: Construction and Building Materials, v. 136 (April 2017).
- (2018): Quasi-far-field blast responses of hierarchical orthogrid-stiffened sheet molding compound (SMC) protective door structures. In: Engineering Structures, v. 168 (August 2018).
- (2018): Room airborne pollutant separation by the use of air curtains in the large building enclosure: Infiltration efficiency and partial enclosure ventilation rate. In: Journal of Building Engineering, v. 18 (July 2018).
- (2017): Study on the Assembled Hub joints in single-layer reticulated domes. Presented at: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae cooperates with
