Linglin Xu 
- (2024): Insights into the role of slag fineness on the hydration of slag-sulfoaluminate cement. In: Construction and Building Materials, v. 447 (October 2024).
- (2024): Damage resistance of calcium sulfoaluminate cement-based engineered cementitious composite (CSA–ECC) under vehicle-bridge coupling vibration. In: Materials and Structures, v. 57, n. 5 (16 May 2024).
- (2024): Feasibility of carbon dioxide uptake cementitious materials preparation by combining γ-C2S with red mud. In: Construction and Building Materials, v. 412 (January 2024).
- (2023): Mechanical properties of fiber‐reinforced calcium sulfoaluminate cement mortars. In: ce/papers, v. 6, n. 6 (December 2023).
- (2024): Correlation analysis of various characteristics of fly ash based on particle separation. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Production of green autoclaved bricks from waste quarry sludge: Mechanical and microstructural aspects. In: Construction and Building Materials, v. 401 (October 2023).
- (2018): Experimental study of calcium sulfoaluminate cement-based self-leveling compound exposed to various temperatures and moisture conditions: Hydration mechanism and mortar properties. In: Cement and Concrete Research, v. 108 (June 2018).
- (2017): Hydration evolution and compressive strength of calcium sulphoaluminate cement constantly cured over the temperature range of 0 to 80 °C. In: Cement and Concrete Research, v. 100 (October 2017).
- (2016): Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties. In: Cement and Concrete Research, v. 79 (January 2016).
- (2023): Effect of curing time and temperature on the mechanical properties of green and ultra-high-strength non-sintered aggregate via autoclave technology. In: Construction and Building Materials, v. 374 (April 2023).
- (2022): Efflorescence inhibition and microstructure evolution of Portland cement-based artificial stone induced by mineral additives. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2021): The improvement of freezing–thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel. In: Construction and Building Materials, v. 291 (July 2021).
- (2022): Mitigation effect of accelerators on the lead–zinc tailing induced retardation in autoclaved concrete. In: Construction and Building Materials, v. 352 (October 2022).
- (2022): Co-utilization of quarry tailings and fly ash for non-sintered ultra-lightweight aggregates (ULWAs) by autoclave technology. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Experimental and modelling study on the deterioration of stabilized soft soil subjected to sulfate attack. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Insight into the local C-S-H structure and its evolution mechanism controlled by curing regime and Ca/Si ratio. In: Construction and Building Materials, v. 333 (May 2022).
- (2022): Resourceful utilization of quarry tailings in the preparation of non-sintered high-strength lightweight aggregates. In: Construction and Building Materials, v. 334 (June 2022).
- (2022): A comparative physio-chemical study of steel slag blended cementitious materials in presence of hydroxyethyl methyl cellulose. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Influence of metakaolin and calcined montmorillonite on the hydration of calcium sulphoaluminate cement. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Promoting the sustainable fabrication of bricks from municipal sewage sludge through modifying calcination: Microstructure and performance characterization. In: Construction and Building Materials, v. 324 (March 2022).
- (2022): Phase-dependent study of chloride binding capacity and its relation to the properties of CAC. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): Rice hush ash as supplementary cementitious material for calcium aluminate cement – Effects on strength and hydration. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): State of water in calcium sulfoaluminate cement paste modified by hydroxyethyl methyl cellulose ether. In: Journal of Building Engineering, v. 43 (November 2021).
- (2020): Role of ITZ in the Degradation Process of Blended Cement Concrete under Magnesium Sulfate Attack. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 9 (September 2020).
- (2018): Retardation effect of elevated temperature on the setting of calcium sulfoaluminate cement clinker. In: Construction and Building Materials, v. 178 (July 2018).
- (2018): A comprehensive study on the relationship between mechanical properties and microstructural development of calcium sulfoaluminate cement based self-leveling underlayments. In: Construction and Building Materials, v. 163 (February 2018).
- (2019): Effect of triethanolamine hydrochloride on the performance of cement paste. In: Construction and Building Materials, v. 200 (March 2019).
- (2012): Formation of ettringite in Portland cement/calcium aluminate cement/calcium sulfate ternary system hydrates at lower temperatures. In: Construction and Building Materials, v. 31 (June 2012).
- (2015): Influence of the Interfacial Transition Zone and Interconnection on Chloride Migration of Portland Cement Mortar. In: Journal of Advanced Concrete Technology, v. 13, n. 3 ( 2015).
- (2018): Damage evolution of blended cement concrete under sodium sulfate attack in relation to ITZ volume content. In: Construction and Building Materials, v. 190 (November 2018).
Structurae cooperates with
