Lei Xu 
- (2024): Development and Field Analysis of a Novel Servo Concrete Bracing System for Deep Foundation Pit Excavation. In: Buildings, v. 14, n. 6 (19 June 2024).
- (2023): A critical review on the vertical stiffness irregularity of railway ballasted track. In: Construction and Building Materials, v. 400 (October 2023).
- (2024): Effect of aging on damping properties of rubberized asphalt binder and rubberized porous asphalt mixture. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Experimental Investigation of the Functional Performance of Pouring Semiflexible Pavement: Healing Capacity, Noise Reduction, and Electrical Conductivity. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023).
- (2023): Dynamic performance of CRTS III ballastless track structure under the train load and temperature. In: Structures, v. 53 (July 2023).
- (2023): Design recommendations on longitudinally stiffened titanium-clad bimetallic steel plate girder. In: Journal of Constructional Steel Research, v. 201 (February 2023).
- (2023): Degradation characteristics of SBS polymer and its contribution to weathering aging of modified asphalt. In: Construction and Building Materials, v. 369 (March 2023).
- (2022): Experimental investigation on bandgap properties of lead/silicone rubber phononic crystals. In: Structures, v. 46 (December 2022).
- (2022): Effects of sodium sulfate and potassium sulfate on the properties of calcium sulfoaluminate (CSA) cement based grouting materials. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Dual roles played by manganese dioxide filler in asphalt pavement material: Chemical modification and healing improvement. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Estimation of chloride diffusion coefficient from water permeability test of cementitious materials. In: Construction and Building Materials, v. 340 (July 2022).
- (2022): Effect of aggregate micro fines in machine-made sand on bleeding, autogenous shrinkage and plastic shrinkage cracking of concrete. In: Materials and Structures, v. 55, n. 3 (19 March 2022).
- (2022): Effect of pre-carbonation on the properties of cement paste subjected to high temperatures. In: Journal of Building Engineering, v. 51 (July 2022).
- (2022): Convolutional neural-network-based automatic dam-surface seepage defect identification from thermograms collected from UAV-mounted thermal imaging camera. In: Construction and Building Materials, v. 323 (March 2022).
- (2022): Experimental and Analytical Study of Flexural Buckling of Cold-Formed Steel Quadruple-Limb Built-Up Box Columns. In: Journal of Structural Engineering (ASCE), v. 148, n. 1 (January 2022).
- (2021): Effect of Tensile–Strain Rate and Specimen Width on Mechanical Properties of Cold-Formed Q345 Steel at Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 9 (September 2021).
- (2021): Effects of ceiling fans on airborne transmission in an air-conditioned space. In: Building and Environment, v. 198 (July 2021).
- (2021): Dynamic Tensile Mechanical Properties and Fracture Characteristics of Water-Saturated Sandstone under the Freezing Effect. In: International Journal of Geomechanics, v. 21, n. 5 (May 2021).
- (2021): Effects of beam axial deformations on storey-based critical gravity loads in tension-only semi-braced steel frames. In: Engineering Structures, v. 232 (April 2021).
- (2021): Effect of fire exposure on residual stresses relief in welded high strength Q690 steel sections. In: Journal of Constructional Steel Research, v. 177 (February 2021).
- (2021): Experimental investigation of shear resistance of cold-formed steel framed sheathed walls. In: Journal of Constructional Steel Research, v. 178 (March 2021).
- (2018): Exact static analysis of eccentrically stiffened plates with partial composite action. In: Composite Structures, v. 198 (August 2018).
- (2020): Experimental and numerical studies on axially restrained cold-formed steel built-up box columns at elevated temperatures. In: Journal of Constructional Steel Research, v. 171 (August 2020).
- (2020): An efficient approach for numerical simulation of concrete-filled round-ended steel tubes. In: Journal of Constructional Steel Research, v. 170 (July 2020).
- (2020): Effect of Tensile-Strain Rate on Mechanical Properties of High-Strength Q460 Steel at Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 7 (July 2020).
- (2020): Effects of column imperfections on capacity of steel frames in variable loading. In: Journal of Constructional Steel Research, v. 165 (February 2020).
- (2019): Creep buckling of high strength Q460 steel columns at elevated temperatures. In: Journal of Constructional Steel Research, v. 157 (June 2019).
- (2003): An experimental study and calculation on the fire resistance of concrete-filled SHS and RHS columns. In: Journal of Constructional Steel Research, v. 59, n. 4 (April 2003).
- (2012): Energy-based design optimization of steel building frameworks using nonlinear response history analysis. In: Journal of Constructional Steel Research, v. 68 (January 2012).
- (2017): Effect of Residual Stresses on the Overall Buckling Behavior of Welded Box-section Columns under Axial Compression Loading. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
Structurae cooperates with
