Jinjun Xu 
- (2024): Probabilistic code-based shear capacity model for I-shaped steel reinforced concrete (SRC) beams. In: Engineering Structures, v. 301 (February 2024).
- (2024): Probabilistic models for characteristic bond stresses of steel-concrete in steel reinforced concrete structures. In: Engineering Structures, v. 300 (February 2024).
- (2023): Reuse of Engineering Waste Soil and Recycled Fine Aggregate to Manufacture Eco-Friendly Unfired Clay Bricks: Experimental Assessment, Data-Driven Modeling and Environmental Friendliness Evaluation. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2022): Properties of using excavated soil waste as fine and coarse aggregates in unfired clay bricks after dry-wet cycles. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Strength criterion of recycled aggregate concrete under triaxial Compression: Model calibration. In: Construction and Building Materials, v. 320 (February 2022).
- (2022): Yield-Line solutions for flexural failure of flat slabs on columns of different shapes. In: Structures, v. 40 (June 2022).
- (2022): Recycling and reuse of construction and demolition waste: From the perspective of national natural science foundation-supported research and research-driven application. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Shear behavior of steel reinforced recycled aggregate concrete beams after exposure to elevated temperatures. In: Journal of Building Engineering, v. 48 (May 2022).
- (2021): Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads. In: Journal of Structural Engineering (ASCE), v. 147, n. 12 (December 2021).
- (2021): Shear behavior of reinforced recycled aggregate concrete beams after exposure to temperatures up to 600 °C. In: Engineering Structures, v. 244 (October 2021).
- (2021): Static Performances of Timber- and Bamboo-Concrete Composite Beams: A Critical Review of Experimental Results. In: The Open Construction and Building Technology Journal, v. 15, n. 1 (18 March 2021).
- (2016): Seismic behavior of T-shaped steel reinforced high strength concrete short-limb shear walls under low cyclic reversed loading. In: Structural Engineering and Mechanics, v. 57, n. 4 (February 2016).
- (2020): Performance evaluation of recycled aggregate concrete-filled steel tubes under different loading conditions: Database analysis and modelling. In: Journal of Building Engineering, v. 30 (July 2020).
- (2019): Performance evaluation of recycled aggregate concrete under multiaxial compression. In: Construction and Building Materials, v. 229 (December 2019).
- (2015): Seismic behavior of steel reinforced concrete (SRC) T-shaped column-beam planar and 3D hybrid joints under cyclic loads. In: Earthquakes and Structures, v. 8, n. 3 (March 2015).
- (2019): Prediction of triaxial behavior of recycled aggregate concrete using multivariable regression and artificial neural network techniques. In: Construction and Building Materials, v. 226 (November 2019).
- (2017): Seismic performance of recycled concrete-filled square steel tube columns. In: Earthquake Engineering and Engineering Vibration, v. 16, n. 1 (January 2017).
- (2016): Recycling and reuse of construction and demolition waste in concrete-filled steel tubes: A review. In: Construction and Building Materials, v. 126 (November 2016).
- (2014): Performance and calculations of recycled aggregate concrete-filled steel tubular (RACFST) short columns under axial compression. In: International Journal of Steel Structures, v. 14, n. 1 ( 2014).
Structurae cooperates with
