Fei Xu 
- (2024): Model test on frost heaving pressure induced by frozen partial ponding behind tunnel lining in cold region. In: Tunnelling and Underground Space Technology, v. 145 (March 2024).
- (2023): Insight into the Mechanical Performance of the TRECC Repaired Cementitious Composite System after Exposure to Freezing and Thawing Cycle. In: Buildings, v. 13, n. 6 (23 May 2023).
- (2023): Seismic behaviour and modelling of rectangular FRP-concrete-steel tubular columns under axial compression and cyclic lateral loading. In: Structures, v. 48 (February 2023).
- (2023): Load transfer mechanism in concrete-filled steel tubular columns: Developments, challenges and opportunities. In: Journal of Constructional Steel Research, v. 203 (April 2023).
- (2023): Mechanism of load introduction and transfer within steel-encased concrete-filled steel tube connections. In: Journal of Constructional Steel Research, v. 203 (April 2023).
- (2022): Influence analysis of space configuration on cooling load of a large semi-closed atrium in hot and humid region. In: Building and Environment, v. 225 (November 2022).
- (2022): Research progress of the thermophysical and mechanical properties of concrete subjected to freeze-thaw cycles. In: Construction and Building Materials, v. 330 (May 2022).
- (2021): Quantification of the actual expansion and deposition of rust in reinforced concrete. In: Construction and Building Materials, v. 297 (August 2021).
- (2021): Impact performance of ballast by incorporating waste tire-derived aggregates. In: Construction and Building Materials, v. 288 (June 2021).
- (2021): A novel micromechanical model of residual fracture energy of hooked-end steel fiber reinforced concrete exposed to high temperature. In: Construction and Building Materials, v. 278 (April 2021).
- (2021): A Large-Scale Model Test System for Stability Study of Tunnel Under Static-Dynamic Load. In: Geotechnical and Geological Engineering, v. 40, n. 2 (23 August 2021).
- (2022): Mechanical behaviour and design of concrete-filled K and KK CHS connections. In: Journal of Constructional Steel Research, v. 188 (January 2022).
- (2021): Mechanism of load introduction and transfer within steel-encased CFST members with shear connections. In: Engineering Structures, v. 242 (September 2021).
- (2021): A Hybrid Approach for the Dynamic Instability Analysis of Single-Layer Latticed Domes with Uncertainties. In: International Journal of Structural Stability and Dynamics, v. 21, n. 6 (March 2021).
- (2018): A theoretical 4-stage shear model for single-lap torqued bolted-joint with clearances. In: Composite Structures, v. 186 (February 2018).
- (2017): Study on impact damage mechanisms and TAI capacity for the composite scarf repair of the primary load-bearing level. In: Composite Structures, v. 181 (December 2017).
- (2020): Prediction of ductile fracture for circular hollow section bracing members under extremely low cycle fatigue. In: Engineering Structures, v. 214 (July 2020).
- (2020): Numerical analysis and formulae for SCF reduction coefficients of CFRP-strengthened CHS gap K-joints. In: Engineering Structures, v. 210 (May 2020).
- (2019): PPP project procurement model selection in China: does it matter?. In: Construction Management and Economics, v. 38, n. 2 (May 2019).
- (2019): Innovative design of the world's tallest electrical transmission towers. In: Proceedings of the Institution of Civil Engineers - Civil Engineering, v. 172, n. 5 (May 2019).
- (2016): Punching shear failure of concrete-filled steel tubular CHS connections. In: Journal of Constructional Steel Research, v. 124 (September 2016).
- (2017): Numerical investigation on compressive performance of CFST columns with encased built-up lattice-angles. In: Journal of Constructional Steel Research, v. 137 (October 2017).
- (2017): Numerical analysis and punching shear fracture based design of longitudinal plate to concrete-filled CHS connections. In: Construction and Building Materials, v. 156 (December 2017).
- (2014): Some observations of the influence factors on the response of pile groups. In: KSCE Journal of Civil Engineering, v. 19, n. 6 (December 2014).
- (2017): Response of a Single Pile Subjected to Tension Load by Using Softening Models. In: Soil Mechanics and Foundation Engineering, v. 54, n. 1 (March 2017).
- (2017): Shallow Sliding Failure Prediction Model of Expansive Soil Slope based on Gaussian Process Theory and Its Engineering Application. In: KSCE Journal of Civil Engineering, v. 22, n. 5 (August 2017).
- (2017): new type support structure introduction and its contrast study with traditional support structure used in tunnel construction. In: Tunnelling and Underground Space Technology, v. 63 (March 2017).
- (2017): Mechanical behaviour of concrete-filled CHS connections subjected to in-plane bending. In: Engineering Structures, v. 148 (October 2017).
- (2019): Load-transfer mechanism in angle-encased CFST members under axial tension. In: Engineering Structures, v. 178 (January 2019).
- (2015): A Single-Plane Beam-Arch Hybrid Bridge in China. In: Structural Engineering International, v. 25, n. 1 (February 2015).
Structurae cooperates with
