Jun Xie 
- (2024): Interfacial characteristics between bitumen and corrosion products on steel slag surface from molecular scale. In: Construction and Building Materials, v. 417 (February 2024).
- (2024): Effect of direct addition of asphalt rubber pellets on mixing, performance and VOCs of asphalt mixtures. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Characterization of red mud and fly ash based for co-curing of Cu2+-contaminated soil. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Exploring the Effects of Different Methane and Oxygen Concentrations on the Methane-Oxidizing Bacteria Mixed Community. In: Journal of Environmental Engineering (ASCE), v. 149, n. 12 (December 2023).
- (2023): Experimental investigation and modeling of the mechanical properties of construction PMMA at different temperatures. In: Structures, v. 57 (November 2023).
- (2022): Electrochemical response and effect evaluation of high belite sulphoaluminate cement combined with red mud-fly ash on solidification of Cu2+-contaminated kaolin. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Influencing mechanisms of RO phase on the cementitious properties of steel slag powder. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Evolution of selective absorption for bitumen from Basic Oxygen Furnace Slag (BOF) during aging and rejuvenation in bituminous mixtures. In: Construction and Building Materials, v. 351 (October 2022).
- (2022): Effects of Iron Oxides on the Anaerobic Codigestion Performances of the Pennisetum Hybrid and Kitchen Waste. In: Journal of Environmental Engineering (ASCE), v. 148, n. 10 (October 2022).
- (2021): Evaluation of the Volume Stability and Resource Benefit of Basic Oxygen Furnace Slag and Its Asphalt Mixture Based on Field Application. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Characteristics of calcareous sand filler and its influence on physical and rheological properties of asphalt mastic. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Investigation of Permanent Deformation Behavior of Steel Slag Asphalt Mixture under Indoor Simulation. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2014): Exploratory Experimental Study on Fatigue Prestress Loss of Prestressed Concrete Beams. In: Journal of Highway and Transportation Research and Development (English Edition), v. 8, n. 2 (June 2014).
- (2021): Experimental study on stainless steel high-strength bolted slip-resistant connections. In: Engineering Structures, v. 231 (March 2021).
- (2021): Enhancement mechanism of induction heating on blending efficiency of RAP - virgin asphalt in steel slag recycled asphalt mixtures. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Effect of nano metakaolin on compressive strength of recycled concrete. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Bonding behavior and its affecting factors between basic oxygen furnace slag and asphalt. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Combusting behavior and pyrolysis products evaluation of SARA components separated from bitumen. In: Construction and Building Materials, v. 244 (May 2020).
- (2020): The effect of water solution erosion on rheological, cohesion and adhesion properties of asphalt. In: Construction and Building Materials, v. 246 (June 2020).
- (2019): Analysis of a Methodology for Torsional Test under Normal Stress and Shear Performance for Asphalt Mixtures. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Comparative Study on Torsional Shear and Triaxial Test of Asphalt Mixtures. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2013): Effect of Rejuvenator Sealer Materials on the Properties of Aged Asphalt Binder. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 7 (July 2013).
- (2012): Influence of surface treated fly ash with coupling agent on asphalt mixture moisture damage. In: Construction and Building Materials, v. 30 (May 2012).
- (2014): Implementation of modified pull-off test by UTM to investigate bonding characteristics of bitumen and basic oxygen furnace slag (BOF). In: Construction and Building Materials, v. 57 (April 2014).
- (2014): Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder. In: Construction and Building Materials, v. 64 (August 2014).
- (2016): Feasibility study of BOF slag containing honeycomb particles in asphalt mixture. In: Construction and Building Materials, v. 124 (October 2016).
- (2017): Effects of steel slag fillers on the rheological properties of asphalt mastic. In: Construction and Building Materials, v. 145 (August 2017).
- (2015): effect of principal stress orientation on tunnel stability. In: Tunnelling and Underground Space Technology, v. 49 (June 2015).
Structurae cooperates with
