Jianhe Xie
- (2024): Improving geopolymer concrete performance with hazardous solid waste phosphogypsum. In: Journal of Building Engineering, v. 95 (October 2024).
- (2023): An investigation of the durability of ultra-lightweight high-strength geopolymeric composites. In: Journal of Building Engineering, v. 80 (December 2023).
- (2023): Effects of pretreated recycled powder substitution on mechanical properties and microstructures of alkali-activated cement. In: Construction and Building Materials, v. 406 (November 2023).
- (2024): Effects of pretreated recycled fine aggregates on the mechanical properties and microstructure of alkali-activated mortar. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Physical, mechanical and microstructural properties of ultra-lightweight high-strength geopolymeric composites. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Effects of phosphogypsum substitution on the performance of ground granulated blast furnace slag/fly ash-based alkali-activated binders. In: Journal of Building Engineering, v. 70 (July 2023).
- (2023): Effects of recycled sand and nanomaterials on ultra-high performance concrete: Workability, compressive strength and microstructure. In: Construction and Building Materials, v. 378 (May 2023).
- (2023): Recycled aggregate seawater–sea sand concrete and its durability after immersion in seawater. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Workability, compressive strength, and microstructures of one-part rubberized geopolymer mortar. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): A state-of-the-art review on the setting behaviours of ground granulated blast furnace slag- and metakaolin-based alkali-activated materials. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Flexural behaviour of full-scale precast recycled concrete sandwich panels with BFRP connectors. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Flexural behaviour of seawater–sea sand concrete beams reinforced with GFRP bars: Effects of the reinforcement ratio, stirrup ratio, shear span ratio and prestress level. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Impact behaviour of fly ash and slag-based geopolymeric concrete: The effects of recycled aggregate content, water-binder ratio and curing age. In: Construction and Building Materials, v. 331 (May 2022).
- (2021): Rubberized geopolymer concrete: Dependence of mechanical properties and freeze-thaw resistance on replacement ratio of crumb rubber. In: Construction and Building Materials, v. 310 (December 2021).
- (2022): Estimation of chloride diffusion coefficient from water permeability test of cementitious materials. In: Construction and Building Materials, v. 340 (July 2022).
- (2022): Effects of Immersion in Water, Alkaline Solution, and Seawater on the Shear Performance of Basalt FRP Bars in Seawater–Sea Sand Concrete. In: Journal of Composites for Construction, v. 26, n. 2 (April 2022).
- (2021): Effects of pre-existing damage and cyclic overloading on the flexural behaviour of RC beams strengthened with prestressed CFRP plates. In: Engineering Structures, v. 247 (November 2021).
- (2021): Investigation of the high-temperature resistance of sludge ceramsite concrete with recycled fine aggregates and GGBS and its application in hollow blocks. In: Journal of Building Engineering, v. 34 (February 2021).
- (2019): Effects of crumb rubber aggregate on the static and fatigue performance of reinforced concrete slabs. In: Composite Structures, v. 228 (November 2019).
- (2020): Study on the optimum initial curing condition for fly ash and GGBS based geopolymer recycled aggregate concrete. In: Construction and Building Materials, v. 247 (June 2020).
- (2020): Properties of concrete containing strengthened crushed brick aggregate by pozzolan slurry. In: Construction and Building Materials, v. 247 (June 2020).
- (2018): Experimental study on the compressive and flexural behaviour of recycled aggregate concrete modified with silica fume and fibres. In: Construction and Building Materials, v. 178 (July 2018).
- (2020): Long-term shear performance of bare and cement mortar-coated BFRP bars in corrosive environments. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): Properties of recycled concrete aggregates strengthened by different types of pozzolan slurry. In: Construction and Building Materials, v. 216 (August 2019).
- (2019): Quality Improvement Techniques for Recycled Concrete Aggregate: A review. In: Journal of Advanced Concrete Technology, v. 17, n. 4 (April 2019).
- (2019): Utilization of unprocessed steel slag as fine aggregate in normal- and high-strength concrete. In: Construction and Building Materials, v. 204 (April 2019).
- (2019): Physicochemical properties of alkali activated GGBS and fly ash geopolymeric recycled concrete. In: Construction and Building Materials, v. 204 (April 2019).
- (2016): Experimental study on compressive behavior of damaged normal- and high-strength concrete confined with CFRP laminates. In: Construction and Building Materials, v. 107 (March 2016).
- (2018): Effects of steel slag as fine aggregate on static and impact behaviours of concrete. In: Construction and Building Materials, v. 192 (December 2018).
Structurae cooperates with
