Yang Xiang 
- (2025): Experimental investigation on wind loads and wind-induced responses of large-span flexible photovoltaic support structure. In: Engineering Structures, v. 322 (January 2025).
- (2024): Amplitude‐dependent modal viscous damping for distributed stick–slip systems. In: Earthquake Engineering and Structural Dynamics, v. 53, n. 12 (July 2024).
- (2024): Multi-objective seismic optimization and evaluation of core-damper-frame tall buildings considering SSI effect. In: Soil Dynamics and Earthquake Engineering, v. 180 (May 2024).
- (2024): Heat risk assessment and response to green infrastructure based on local climate zones. In: Building and Environment, v. 248 (January 2024).
- (2023): Floor seismic response spectrum for the building equipped with visco-elastic decouplers. In: International Journal of Structural Stability and Dynamics, v. 23, n. 16-18 (November 2023).
- (2023): Aseismic high-rise structure with visco-elastically connected shear- and flexural-subsystems. In: Engineering Structures, v. 291 (September 2023).
- (2023): Parametric studies and design recommendations for assembled steel rod energy dissipaters. In: Journal of Building Engineering, v. 68 (June 2023).
- (2022): Feasibility of a nonlinear spectral approach for peak floor acceleration of multi-story bilinear hysteretic buildings. In: Bulletin of Earthquake Engineering, v. 21, n. 1 (October 2022).
- (2023): The Effect of Cables Corrosion on Dynamic Response of Stonecutters Cable-Stayed Bridge Model. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 50, n. 4 (April 2023).
- (2022): Global optimization of locally installed adaptive negative stiffness amplifying damper in steel frames through rocking wall. In: Journal of Building Engineering, v. 60 (November 2022).
- (2022): Constitutive model for cyclic behavior of mild steel under various strain amplitudes. In: Journal of Constructional Steel Research, v. 196 (September 2022).
- (2022): Effectiveness and robustness of braced‐damper systems with adaptive negative stiffness devices in yielding structures. In: Earthquake Engineering and Structural Dynamics, v. 51, n. 11 (September 2022).
- (2022): Analytical approach for vertical floor acceleration of regular RC frames under earthquake excitation. In: Engineering Structures, v. 251 (January 2022).
- (2021): Modelling and evaluation of thermoelastic damping of FGM micro plates based on the Levinson plate theory. In: Composite Structures, v. 278 (December 2021).
- (2021): Earthquake-induced collapse of steel latticed shell: Energy criterion implementation and experimental validation. In: Engineering Structures, v. 236 (June 2021).
- (2021): Axial compression capacity of steel circular tube with large initial curvature: Column curve and application in structural assessment. In: Journal of Constructional Steel Research, v. 177 (February 2021).
- (2021): Probabilistic effectiveness of visco-elastic dampers considering earthquake excitation uncertainty and ambient temperature fluctuation. In: Engineering Structures, v. 226 (January 2021).
- (2019): Crack identification of functionally graded beams using continuous wavelet transform. In: Composite Structures, v. 210 (February 2019).
- (2020): Effect of the primary structure on the seismic response of the cable-net façade. In: Engineering Structures, v. 220 (October 2020).
- (1991): Buckling of Restrained Columns with Shear Deformation and Axial Shortening. In: Journal of Engineering Mechanics (ASCE), v. 117, n. 9 (September 1991).
- (2016): A linearized approach for the seismic response analysis of flexible cable net structures. In: Soil Dynamics and Earthquake Engineering, v. 88 (September 2016).
- (2017): An extended modal pushover procedure for estimating the in-plane seismic responses of latticed arches. In: Soil Dynamics and Earthquake Engineering, v. 93 (February 2017).
- (2019): Ductility demand of bilinear hysteretic systems with large post-yield stiffness: Spectral model and application in the seismic design of dual-systems. In: Engineering Structures, v. 187 (May 2019).
- (2016): Load-bearing capacity of occlusive high-strength bolt connections. In: Journal of Constructional Steel Research, v. 127 (December 2016).
- (2018): Global stability analysis of spatial structures based on Eigen-stiffness and structural Eigen-curve. In: Journal of Constructional Steel Research, v. 141 (February 2018).
- (2018): Improved step-by-step modeling method for analyzing the mechanical behavior of steel structures during construction. In: Advances in Structural Engineering, v. 21, n. 11 (February 2018).
- (2017): Analyzing the seismic response of nonlinear cable net structure by the linear response spectrum analysis method. In: Advances in Structural Engineering, v. 21, n. 2 (August 2017).
- (2017): Estimating the response of steel structures subjected to vertical seismic excitation: Idealized model and inelastic displacement ratio. In: Engineering Structures, v. 148 (October 2017).
- (2019): Damping modification factor for the vertical seismic response spectrum: A study based on Japanese earthquake records. In: Engineering Structures, v. 179 (January 2019).
- (2017): Applicability of an EMPA procedure for calculating the seismic responses of planar latticed arches. Presented at: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae cooperates with
