Yimin Xia 
- : Numerical Investigation of the Impact of Tunneling Parameters on the Mud Discharge Performance of Atmospheric Cutterhead. In: KSCE Journal of Civil Engineering.
- : Effect of structural parameters on the opening ratio of the atmospheric cutterhead. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering.
- (2024): Collaborative design of atmospheric cutterhead opening and disc cutter arrangement. In: Tunnelling and Underground Space Technology, v. 154 (December 2024).
- (2024): Analysis of flow field characteristics and factors influencing the excavation chamber in large-diameter slurry shield. In: Tunnelling and Underground Space Technology, v. 152 (October 2024).
- (2024): Comparative study on the rock breaking performance of constant cross section disc cutter and inserted tooth disc cutter for cutting granite. In: Tunnelling and Underground Space Technology, v. 150 (August 2024).
- (2023): Field and laboratory experimental studies on hard-rock tunnel excavation based on disc cutter coupled with high-pressure waterjet. In: Frontiers of Structural and Civil Engineering, v. 17, n. 9 (20 November 2023).
- (2023): A New Linear Cutting Experimental Machine for Disc-Cutter Rock Breaking with High-Pressure Water Jets Assisted. In: KSCE Journal of Civil Engineering, v. 27, n. 6 (April 2023).
- (2023): Experimental and Simulation Study on the Hard Rock–Breaking Characteristics of Disk Cutter under the Water Jet Precutting Kerf. In: International Journal of Geomechanics, v. 23, n. 4 (April 2023).
- (2022): Influence of Geological Properties and Operational Parameters on TBM Muck Removal Performance for Yinsong Tunnel. In: Geotechnical and Geological Engineering, v. 40, n. 4 (16 January 2022).
- (2021): Working stage identification of excavators based on control signals of operating handles. In: Automation in Construction, v. 130 (October 2021).
- (2021): Study on Optimum Free-face Condition of Cutting Hard Rock with Tunnel Boring Machine Hob. In: Periodica Polytechnica Civil Engineering, v. 65, n. 2 ( 2021).
- : Experimental Evaluation of Fragments from TBM Disc Cutting under Different Load Cases. In: Periodica Polytechnica Civil Engineering.
- : Establishment of Coal-rock Constitutive Models for Numerical Simulation of Coal-rock Cutting by Conical Picks. In: Periodica Polytechnica Civil Engineering.
- : Cutting Characteristics and Layout of Pre-cutting Machine Cutter. In: Periodica Polytechnica Civil Engineering.
- (2020): Wear Characteristics of TBM Disc Cutter Ring Sliding against Different Types of Rock. In: KSCE Journal of Civil Engineering, v. 24, n. 10 (July 2020).
- (2020): Prediction model of wear rate of inner disc cutter of engineering in Yinsong, Jilin. In: Tunnelling and Underground Space Technology, v. 99 (May 2020).
- (2020): Intelligent identification for working-cycle stages of excavator based on main pump pressure. In: Automation in Construction, v. 109 (January 2020).
- (2019): Multiobjective Optimization Design for Structural Parameters of TBM Disc Cutter Rings Based on FAHP and SAMPGA. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Online monitoring device of disc cutter wear – Design and field test. In: Tunnelling and Underground Space Technology, v. 89 (July 2019).
- (2018): Numerical investigation of pipeline transport characteristics of slurry shield under gravel stratum. In: Tunnelling and Underground Space Technology, v. 71 (January 2018).
- (2016): Numerical simulation of ventilation and dust suppression system for open-type TBM tunneling work area. In: Tunnelling and Underground Space Technology, v. 56 (June 2016).
- (2016): Development of on-line rotational speed monitor system of TBM disc cutter. In: Tunnelling and Underground Space Technology, v. 57 (August 2016).
- (2018): Experimental study on wear of TBM disc cutter rings with different kinds of hardness. In: Tunnelling and Underground Space Technology, v. 82 (December 2018).
- (2018): Changes of Atterberg limits and electrochemical behaviors of clays with dispersants as conditioning agents for EPB shield tunnelling. In: Tunnelling and Underground Space Technology, v. 73 (March 2018).
Structurae cooperates with
