Tao Wu 
- : Integrating spatial vitality and node-place model to evaluate and classify metro station areas in Wuhan. In: Frontiers of Architectural Research.
- (2024): Flexural behavior and serviceability of steel fiber-reinforced lightweight aggregate concrete beams reinforced with high-strength steel bars. In: Construction and Building Materials, v. 437 (July 2024).
- : Performance-based wind engineering for roof cladding based on vulnerability analysis of roof plate unit. In: Journal of Building Engineering.
- (2023): Influence of ground granulated blast furnace slag on the dispersivity and mechanical property of dispersive soil. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Nonlinear consolidation of arbitrary layered soil with continuous drainage boundary: An approximate closed-form solution. In: Soils and Foundations, v. 64, n. 1 (February 2024).
- (2023): Numerical Study on the Influence of Bubble Defection on the Bond Strength of Externally Bonded Fiber-Reinforced Polymer-to-Concrete Joints. In: Buildings, v. 13, n. 10 (10 October 2023).
- (2023): Isogeometric degenerated shell formulation for post-buckling analysis of composite variable-stiffness shells. In: Composite Structures, v. 321 (October 2023).
- (2023): Numerical analysis of moisture and gas transport in earthen final covers considering effects of vapor and temperature gradient. In: Soils and Foundations, v. 63, n. 1 (February 2023).
- (2022): Experimental seismic analysis of new types of steel-reinforced lightweight concrete columns with cross-shaped steel section. In: Journal of Building Engineering, v. 60 (November 2022).
- (2022): The optimal placement of piezoelectric actuator and sensor for active structural noise control of plates. In: Smart Materials and Structures, v. 31, n. 9 (7 July 2022).
- (2022): Measurement and simulation of residual stresses in laser welded CFRP/steel lap joints. In: Composite Structures, v. 292 (July 2022).
- (2022): Measuring the accessibility of metro stations in Tianjin: an origin-destination approach. In: Journal of Asian Architecture and Building Engineering, v. 22, n. 2 (March 2022).
- (2022): A new quantitative acoustic emission model for damage characterization of composite laminates using original waveforms. In: Structural Health Monitoring, v. 21, n. 5 (March 2022).
- (2022): A new recommended load cycle for dynamic wind-resistant test of roof system based on the principle of damage equivalence. In: Journal of Building Engineering, v. 48 (May 2022).
- (2022): Failure mode and flexural capacity of concrete beams prestressed with unbonded FRP tendons. In: Composite Structures, v. 283 (March 2022).
- (2021): Parameter determination of constitutive relationship of 3004H24 aluminum alloy based on ductile damage model. In: Structures, v. 34 (December 2021).
- (2021): Interaction Model for Torsional Dynamic Response of Thin-Wall Pipe Piles Embedded in Both Vertically and Radially Inhomogeneous Soil. In: International Journal of Geomechanics, v. 21, n. 10 (October 2021).
- (2021): Implementing ensemble learning methods to predict the shear strength of RC deep beams with/without web reinforcements. In: Engineering Structures, v. 235 (May 2021).
- (2020): Flexural cracks in steel fiber-reinforced lightweight aggregate concrete beams reinforced with FRP bars. In: Composite Structures, v. 253 (December 2020).
- (2020): A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. In: Composite Structures, v. 238 (April 2020).
- (2020): Hygrothermal performance of rammed earth wall in Tibetan Autonomous Prefecture in Sichuan Province of China. In: Building and Environment, v. 181 (August 2020).
- (2020): Investigation of stress-strain relationship for confined lightweight aggregate concrete. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Probabilistic models of the strut efficiency factor for RC deep beams with MCMC method. In: Structural Concrete, v. 21, n. 3 (June 2020).
- (2019): g-C 3 N 4 /TiO 2 Composite Photocatalyst and Its Application to Asphalt for NO Removal. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 8 (August 2019).
- (2019): g-C3N4/TiO2 Photocatalyst and Its Performance of NO Degradation in Emulsified Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 5 (May 2019).
- (2019): Experimental study of seismic response reduction effects of particle damper using substructure shake table testing method. In: Structural Control and Health Monitoring, v. 26, n. 2 (January 2019).
- (2019): Flexural Behavior of Steel Fiber–Reinforced Lightweight Aggregate Concrete Beams Reinforced with Glass Fiber–Reinforced Polymer Bars. In: Journal of Composites for Construction, v. 23, n. 2 (April 2019).
- (2019): Mechanical properties and microstructure of lightweight aggregate concrete with and without fibers. In: Construction and Building Materials, v. 199 (February 2019).
- (2016): Interfacial tensile bond behavior of permeable polymer mortar to concrete. In: Construction and Building Materials, v. 121 (September 2016).
- (2003): Piezoelectric resonating structures for microelectronic cooling. In: Smart Materials and Structures, v. 12, n. 2 (April 2003).
Structurae cooperates with
