Qi Wu 
- (2024): Dynamic deformation characteristics of saturated coral sand incorporating fines content under drained conditions. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): A new procedure for characterizing the critical intergranular contact state of non-plastic sand – fines mixed materials. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Liquefaction susceptibility and deformation characteristics of saturated coral sandy soils subjected to cyclic loadings – a critical review. In: Earthquake Engineering and Engineering Vibration, v. 23, n. 1 (January 2024).
- (2023): Long-term creep monitoring of composite wing leading edge using embedded fiber Bragg grating. In: Structural Health Monitoring, v. 23, n. 4 (November 2023).
- (2023): Impact of indoor environmental quality (IEQ) factors on occupants' environmental perception and satisfaction in hospital wards. In: Building and Environment, v. 245 (November 2023).
- (2024): Prediction model for small-strain shear modulus of non-plastic fine–coarse-grained soil mixtures based on extreme void ratios. In: Soil Dynamics and Earthquake Engineering, v. 176 (January 2024).
- (2023): Experimental and Numerical Study on Dynamic Response of Underground Structure in Coral Sand Under Earthquakes. In: Journal of Earthquake Engineering, v. 28, n. 1 (April 2023).
- (2023): Excess pore water pressure generation in saturated sandy soils subjected to various cyclic stress paths. In: Soil Dynamics and Earthquake Engineering, v. 168 (May 2023).
- (2023): Numerical analysis of seismic response of rectangular underground structure in coral sand. In: Underground Space, v. 9 (April 2023).
- (2022): Microfabric evolution of coral sand foundations during seismic liquefaction using 3D images. In: Soil Dynamics and Earthquake Engineering, v. 162 (November 2022).
- (2022): Damage evaluation of complex composite structures using acousto-ultrasonic detection combined with phase-shifted fiber Bragg grating and dual-frequency based data processing. In: Composite Structures, v. 281 (February 2022).
- (2022): Numerical simulation of Lamb wave sensing of low-velocity impact damage in composite laminate. In: Composite Structures, v. 279 (January 2022).
- (2021): Debonding monitoring of CFRP T-joint using optical acoustic emission sensor. In: Composite Structures, v. 273 (October 2021).
- (2021): Dual-frequency acousto-ultrasonic sensing of impact damage in composites for mitigating signal instability. In: Structural Health Monitoring, v. 21, n. 2 (May 2021).
- (2018): A semi-analytical method for dynamic responses of cantilever plates under moving loads. Presented at: IABSE Conference: Engineering the Developing World, Kuala Lumpur, Malaysia, 25-27 April 2018.
- (2014): Acoustic emission detection and position identification of transverse cracks in carbon fiber–reinforced plastic laminates by using a novel optical fiber ultrasonic sensing system. In: Structural Health Monitoring, v. 14, n. 3 (November 2014).
- (2015): The identification of damage types in carbon fiber–reinforced plastic cross-ply laminates using a novel fiber-optic acoustic emission sensor. In: Structural Health Monitoring, v. 15, n. 1 (December 2015).
- (2018): Nonlinear ultrasonic detection for evaluating fatigue crack in metal plate. In: Structural Health Monitoring, v. 18, n. 3 (March 2018).
- (2019): CFD investigation of the statistical characteristics of NOx photo-catalytic degradation in a glass curtain wall in hazy winter weather. In: Sustainable Cities and Society, v. 50 (October 2019).
- (2021): Shaking table tests on the seismic responses of underground structures in coral sand. In: Tunnelling and Underground Space Technology, v. 109 (March 2021).
- (2021): Evaluation of the matrix crack number in carbon fiber reinforced plastics using linear and nonlinear acousto-ultrasonic detections. In: Composite Structures, v. 255 (January 2021).
- (2020): Localization simulation of a representative volume element with prescribed displacement boundary for investigating the thermal residual stresses of composite forming. In: Composite Structures, v. 235 (March 2020).
- (2020): Numerical Study on the Longitudinal Response Characteristics of Utility Tunnel under Strong Earthquake: A Case Study. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2021): Shaking Table Tests on Seismic Responses of Pile-soil-superstructure in Coral Sand. In: Journal of Earthquake Engineering, v. 26, n. 7 (March 2021).
- (2020): Resonance analysis of cantilever plates subjected to moving forces by a semi-analytical method. In: International Journal of Structural Stability and Dynamics, v. 20, n. 4 (April 2020).
- (2019): Shear Modulus and Damping Ratio of Sand–Gravel Mixtures Over a Wide Strain Range. In: Journal of Earthquake Engineering, v. 23, n. 8 ( 2019).
- (2015): Dependence of the cyclic response of structural steel on loading history under large inelastic strains. In: Journal of Constructional Steel Research, v. 104 (January 2015).
- (2016): Fiber-optic sensor-based remote acoustic emission measurement of composites. In: Smart Materials and Structures, v. 25, n. 10 (October 2016).
- (2016): Investigation of an integrated fiber laser sensor system in ultrasonic structural health monitoring. In: Smart Materials and Structures, v. 25, n. 3 (March 2016).
- (2015): Application of a novel optical fiber sensor to detection of acoustic emissions by various damages in CFRP laminates. In: Smart Materials and Structures, v. 24, n. 1 (January 2015).
Structurae cooperates with
