Min Wu 
- (2024): The impact of forced early-age carbonation on the hydration of cementitious materials. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): Dynamic Performance Analysis of Precast Segment Column Reinforced with CFRP Subject to Vehicle Collision. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Modelling and assessing long-term urban transportation system resilience based on system dynamics. In: Sustainable Cities and Society, v. 109 (August 2024).
- (2024): Design and performance analysis of a flexible-hinged piezoelectric driving dispenser. In: Smart Materials and Structures, v. 33, n. 4 (4 March 2024).
- (2024): Abrasion damage of concrete for hydraulic structures and mitigation measures: A comprehensive review. In: Construction and Building Materials, v. 422 (April 2024).
- (2024): Re-using excavated rock from underground tunneling activities to develop eco-friendly ultrahigh performance concrete. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Microstructural damage characterization of NC-UHPC composite under salt freeze-thaw cycles based on ex-situ X-ray computed tomography. In: Construction and Building Materials, v. 414 (February 2024).
- : Numerical study of precast segment columns with shear keys under vehicle collision. In: Structure and Infrastructure Engineering.
- (2023): Properties of Cement Mortars Subject to Varied Carbonation Treatments at Early Ages. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Performance analysis of the ultra high performance concrete composite beam subjected to impact loads. In: Advances in Structural Engineering, v. 26, n. 8 (March 2023).
- (2023): Research on cutting stock optimization of rebar engineering based on building information modeling and an improved particle swarm optimization algorithm. In: Developments in the Built Environment, v. 13 (March 2023).
- (2023): Design and experiment of a new double needle type piezoelectric jetting dispenser. In: Smart Materials and Structures, v. 32, n. 3 (1 February 2023).
- (2021): Investigation on the performance of hydroxyethyl methyl cellulose modified cement mortars with Portland cement-calcium sulfoaluminate cement binders. In: Construction and Building Materials, v. 283 (May 2021).
- (2022): An exploratory study on using red mud waste as a replacement for fly ash to prepare Engineered Cementitious Composites. In: Construction and Building Materials, v. 342 (August 2022).
- (2021): Dynamic response analysis of bridge precast segment piers under vehicle collision. In: Engineering Failure Analysis, v. 124 (June 2021).
- (2022): Effects of Freeze–Thaw Cycles on Volume Change Behavior and Mechanical Properties of Expansive Clay with Different Degrees of Compaction. In: International Journal of Geomechanics, v. 22, n. 5 (May 2022).
- (2022): Effect of TEA·H3PO4 and TEA·C18H30O3S on the mechanical properties and hydration characteristics of cement paste. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Long-term performance and hydration of cement mortars with hydroxyethyl methyl cellulose cured at 5℃ low temperature. In: Construction and Building Materials, v. 307 (November 2021).
- (2023): Numerical investigation of precast RC beam with unbonded prestressing tendon under impact loads. In: Structure and Infrastructure Engineering, v. 19, n. 4 (July 2023).
- (2021): Case Study on Safety Assessment of Rockfall and Splash Stone Protective Structures for Secondary Excavation of Highway Slope. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2020): Development of green binder systems based on flue gas desulfurization gypsum and fly ash incorporating slag or steel slag powders. In: Construction and Building Materials, v. 265 (December 2020).
- (2020): Dynamic responses and reliability analysis of bridge double-column under vehicle collision. In: Engineering Structures, v. 221 (October 2020).
- (2020): Current understanding on microbiologically induced corrosion of concrete in sewer structures: a review of the evaluation methods and mitigation measures. In: Construction and Building Materials, v. 247 (June 2020).
- (2020): Effect of Tapered Head Sleeve Structural Parameters on Grouting Connection Joints Deformation. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (May 2020).
- (2020): Microbiologically induced corrosion of concrete in sewer structures: A review of the mechanisms and phenomena. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Effect of etched Layered double hydroxides on anti ultraviolet aging properties of bitumen. In: Construction and Building Materials, v. 178 (July 2018).
- (2020): Properties of polyvinyl alcohol fiber reinforced fly ash based Engineered Geopolymer Composites with zeolite replacement. In: Construction and Building Materials, v. 231 (January 2020).
- (2014): Application of water vapor sorption measurements for porosity characterization of hardened cement pastes. In: Construction and Building Materials, v. 66 (September 2014).
- (2012): Net Asset Value–Based Concession Duration Model for BOT Contracts. In: Journal of Construction Engineering and Management, v. 138, n. 2 (February 2012).
- (2018): Re-optimization strategy for truck crane lift-path planning. In: Automation in Construction, v. 90 (June 2018).
Structurae cooperates with
