Kai Wu 
- (2024): Exploring Pore Structure Characteristics of Alkali Residue-Based Foamed Concrete and Their Effect on Compressive Properties: Insights from Low-Field Nuclear Magnetic Resonance Analysis. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 9 (September 2024).
- (2024): Investigations into magnesium oxide carbon sequestration foamed concrete: Mechanical performance, microstructure and environmental benefits. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Macroscopic behavior and microscopic structure of serpentine-MgO carbon sequestration foamed concrete. In: Journal of Building Engineering, v. 86 (June 2024).
- (2024): Failure mechanism and bearing capacity analysis of steel fiber steel reinforced concrete(SFSRC) beams. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Investigation on the rheology, self-shrinkage, pore structure, and fractal dimension of coral powder-cement slurry. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): Influence of seawater concentration on alkali-silica reaction of seawater sea-sand concrete: Mimicking through NaCl solution and recycled glass aggregate. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Heterogeneous distribution of lightweight porous ceramic sands in a high strength cement grout. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Feasibility of carbon dioxide uptake cementitious materials preparation by combining γ-C2S with red mud. In: Construction and Building Materials, v. 412 (January 2024).
- (2023): Mechanical properties of fiber‐reinforced calcium sulfoaluminate cement mortars. In: ce/papers, v. 6, n. 6 (December 2023).
- (2023): Method for estimating three-dimensional effects on braced excavation in clay. In: Tunnelling and Underground Space Technology, v. 141 (November 2023).
- (2023): Long-term (2 years) drying shrinkage evaluation of alkali-activated slag mortar: Experiments and partial factor analysis. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Lithium slag-based geopolymer synthesized with hybrid solid activators. In: Construction and Building Materials, v. 365 (February 2023).
- (2021): The improvement of freezing–thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel. In: Construction and Building Materials, v. 291 (July 2021).
- (2022): Influence of curing conditions on hydration of magnesium silicate hydrate cement. In: Construction and Building Materials, v. 361 (December 2022).
- (2022): Fly ash-based artificial aggregates synthesized through alkali-activated cold-bonded pelletization technology. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Insight into the local C-S-H structure and its evolution mechanism controlled by curing regime and Ca/Si ratio. In: Construction and Building Materials, v. 333 (May 2022).
- (2021): Limited fractal behavior in cement paste upon mercury intrusion porosimetry test: Analysis and models. In: Construction and Building Materials, v. 276 (March 2021).
- (2022): Influence of metakaolin and calcined montmorillonite on the hydration of calcium sulphoaluminate cement. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2021): Experimental study on the interfacial bond strength and energy dissipation capacity of steel and steel fibre reinforced concrete (SSFRC) structures. In: Engineering Structures, v. 235 (May 2021).
- (2021): Interactions between Organic Chelation Agents and Ions in Seawater for Accelerating Self-Healing of Cracks in Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 4 (April 2021).
- (2020): Influence of aggregate surface treatment on corrosion resistance of cement composite under chloride attack. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Microbiologically induced corrosion of concrete in sewer structures: A review of the mechanisms and phenomena. In: Construction and Building Materials, v. 239 (April 2020).
- (2019): Load-Transfer Mechanism and Bond-Stress Components in Steel and Steel Fiber–Reinforced Concrete Structure. In: Journal of Structural Engineering (ASCE), v. 145, n. 12 (December 2019).
- (2019): Improvement on the mechanical properties of CA mortar and concrete composite specimens in high-speed railway by modification of interlayer bonding. In: Construction and Building Materials, v. 228 (December 2019).
- (2019): Failure Modes and Damage Processes of Vulnerable Stories in SRC-RC Hybrid Frames. In: Journal of Performance of Constructed Facilities (ASCE), v. 33, n. 5 (October 2019).
- (2013): Failure mechanism and bearing capacity of transfer columns in SRC-RC hybrid structures. In: European Journal of Environmental and Civil Engineering, v. 17, n. 1 (January 2013).
- (2019): Lateral Bearing Capacity and Stiffness Calculation Method of SRC-RC Columns. In: KSCE Journal of Civil Engineering, v. 23, n. 5 (March 2019).
- (2019): Influence of TiO2 incorporation methods on NOx abatement in Engineered Cementitious Composites. In: Construction and Building Materials, v. 221 (October 2019).
- (2017): Internal curing effect on strength of recycled concrete and its enhancement in concrete-filled thin-wall steel tube. In: Construction and Building Materials, v. 153 (October 2017).
- (2015): Influence of the Interfacial Transition Zone and Interconnection on Chloride Migration of Portland Cement Mortar. In: Journal of Advanced Concrete Technology, v. 13, n. 3 ( 2015).
Structurae cooperates with
