Bin Wu 
- (2024): Design Method for Local Buckling Resistance of Double Steel Plate–Concrete Composite Walls with Stiffening Ribs and Tie Plates. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2024): Coconut coir dust extract as a novel green corrosion inhibitor for carbon steel in the chloride-contaminated concrete pore solution. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Comparison of wind-resistant capacities of standing seam roof systems under static uniform pressures and dynamic non-uniform wind pressures. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 241 (October 2023).
- (2023): Experimental performance and numerical prediction of precast prestressed concrete frames endowed with shear panel dampers. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): Control nodes based loading method: A versatile approach for multi‐degree‐of‐freedom loading in quasi‐static tests and hybrid simulations. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 1 (February 2023).
- (2022): Concept, analysis, and test of a self‐centering viscous damper with displacement capacity enhancement. In: Earthquake Engineering and Structural Dynamics, v. 51, n. 11 (September 2022).
- (2014): An effective online delay estimation method based on a simplified physical system model for real-time hybrid simulation. In: Smart Structures and Systems, v. 14, n. 6 (December 2014).
- (2022): Assessing the potential and utilization of solar energy at the building-scale in Shanghai. In: Sustainable Cities and Society, v. 82 (July 2022).
- (2011): Empirical Analysis of Commuters’ Nonwork Stop-Making Behavior in Beijing, China. In: Journal of Transportation Engineering, v. 137, n. 5 (May 2011).
- (2021): Displacement Approach to Determine the Effective Tensile and Torsional Modulus of Nanowires. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Effect of Curvature-Dependent Surface Elasticity on the Flexural Properties of Nanowire. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2017): Design of an Active Low Frequency Vibration Isolation System for Atom Interferometry by Using Sliding Mode Control. In: Stavební obzor - Civil Engineering Journal, v. 26, n. 4 ( 2017).
- (2021): Design-parameter study on seismic performance of chevron-configured SCBFs with yielding beams. In: Journal of Constructional Steel Research, v. 179 (April 2021).
- (2020): Effect of Hybrid Steel-Basalt Fiber on Behaviors of Manufactured Sand RPC and Fiber Content Optimization Using Center Composite Design. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2015): Computation of dispersion relations of functionally graded rectangular bars. In: Composite Structures, v. 133 (December 2015).
- (2021): Adaptive Feedforward and Feedback Compensation Method for Real-time Hybrid Simulation Based on a Discrete Physical Testing System Model. In: Journal of Earthquake Engineering, v. 26, n. 8 (March 2021).
- (2020): Dynamic force loading strategy for effective force testing considering natural velocity feedback compensation and nonlinearity. In: International Journal of Structural Stability and Dynamics, v. 21, n. 1 (October 2020).
- (2020): Experimental investigation on the cyclic performance of perfobond rib shear connectors. In: Advances in Structural Engineering, v. 23, n. 16 (July 2020).
- (2020): Energy‐consistent integration method and its application to hybrid testing. In: Earthquake Engineering and Structural Dynamics, v. 49, n. 5 (25 April 2020).
- (2015): Buckling mechanism of steel core of buckling-restrained braces. In: Journal of Constructional Steel Research, v. 107 (April 2015).
- (2017): Buckling mechanism and global stability design method of buckling-restrained braces. In: Journal of Constructional Steel Research, v. 138 (November 2017).
- (2011): Equivalent Force Control Method for Real-time Testing of Nonlinear Structures. In: Journal of Earthquake Engineering, v. 15, n. 1 ( 2011).
- (2017): Delamination detection in composite plates by synthesizing time-reversed Lamb waves and a modified damage imaging algorithm based on RAPID. In: Structural Control and Health Monitoring, v. 24, n. 5 (May 2017).
- (2015): Experimental and Analytical Studies on a Reinforced Concrete Frame Retrofitted with Buckling-Restrained Brace and Steel Caging. In: Advances in Structural Engineering, v. 18, n. 2 (February 2015).
- (2014): Equivalent force control method for substructure pseudo-dynamic test of a full-scale masonry structure. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 7 (May 2014).
- (2013): Actuator dynamics compensation based on upper bound delay for real-time hybrid simulation. In: Earthquake Engineering and Structural Dynamics, v. 42, n. 12 (10 October 2013).
- (2007): Equivalent force control method for generalized real-time substructure testing with implicit integration. In: Earthquake Engineering and Structural Dynamics, v. 36, n. 9 (25 July 2007).
- (2012): Effect of brace end rotation on the global buckling behavior of pin-connected buckling-restrained braces with end collars. In: Engineering Structures, v. 40 (July 2012).
- (2015): Baseline-free delamination inspection in composite plates by synthesizing non-contact air-coupled Lamb wave scan method and virtual time reversal algorithm. In: Smart Materials and Structures, v. 24, n. 4 (April 2015).
- (2018): Buckling mechanism of steel core and global stability design method for fixed-end buckling-restrained braces. In: Engineering Structures, v. 174 (November 2018).
Structurae cooperates with
