Monika Woloszyn
- (2023): Extended hygrothermal characterization of unstabilized rammed earth for modern construction. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Biopolymers impact on hygrothermal properties of rammed earth: from material to building scale. In: Building and Environment, v. 233 (April 2023).
- (2021): Experimental study on the capillary absorption characteristics of rammed earth. In: Construction and Building Materials, v. 283 (May 2021).
- (2022): Determination of the moisture diffusivity of rammed earth from transient capillary absorption moisture content profiles. In: Construction and Building Materials, v. 318 (February 2022).
- (2022): Integration of phasing on multi-objective optimization of building stock energy retrofit. In: Energy and Buildings, v. 257 (February 2022).
- (2021): Development of an assessment methodology for IAQ ventilation performance in residential buildings: An investigation of relevant performance indicators. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): EASI RBD-FAST: An efficient method of global sensitivity analysis for present and future challenges in building performance simulation. In: Journal of Building Engineering, v. 43 (November 2021).
- (2019): Modelling the impact of multizone airleakage on ventilation performance and indoor air quality in low-energy homes. In: Building Simulation, v. 12, n. 6 (August 2019).
- (2015): Identification of the hygrothermal properties of a building envelope material by the covariance matrix adaptation evolution strategy. In: Journal of Building Performance Simulation, v. 9, n. 1 (February 2015).
- (2017): Impact of different construction details on air permeability of timber frame wall assemblies: Some experimental evidences from a three-scale laboratory study. In: Journal of Building Physics, v. 41, n. 2 (July 2017).
- (2007): Investigation of Microclimate by CFD Modeling of Moisture Interactions between Air and Constructions. In: Journal of Building Physics, v. 30, n. 4 (April 2007).
- (2011): Experimental wooden frame house for the validation of whole building heat and moisture transfer numerical models. In: Energy and Buildings, v. 43, n. 6 (June 2011).
- (2016): 2D whole-building hygrothermal simulation analysis based on a PGD reduced order model. In: Energy and Buildings, v. 112 (January 2016).
- (2016): Assessment of the validity of some common assumptions in hygrothermal modeling of earth based materials. In: Energy and Buildings, v. 116 (March 2016).
- (2018): Dynamic experimental method for identification of hygric parameters of a hygroscopic material. In: Building and Environment, v. 131 (March 2018).
- (2017): Hygric characterization of wood fiber insulation under uncertainty with dynamic measurements and Markov Chain Monte-Carlo algorithm. In: Building and Environment, v. 114 (March 2017).
- (2015): Experimental and numerical investigations of the effects of air leakage on temperature and moisture fields in porous insulation. In: Building and Environment, v. 94 (December 2015).
- (2015): Methodological challenges and developments in LCA of low energy buildings: Application to biogenic carbon and global warming assessment. In: Building and Environment, v. 90 (August 2015).
- (2015): Dynamic coupling between vapour and heat transfer in wall assemblies: Analysis of measurements achieved under real climate. In: Building and Environment, v. 87 (May 2015).
- (2013): Assessment of the air change rate of airtight buildings under natural conditions using the tracer gas technique. Comparison with numerical modelling. In: Building and Environment, v. 60 (February 2013).
- (2009): The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings. In: Building and Environment, v. 44, n. 3 (March 2009).
- (2009): Modelling of hysteresis influence on mass transfer in building materials. In: Building and Environment, v. 44, n. 3 (March 2009).
- (2004): Diagonal air-distribution system for operating rooms: experiment and modeling. In: Building and Environment, v. 39, n. 10 (October 2004).
- (2002): Interzonal air and moisture transport in a test house: experiment and modelling. In: Building and Environment, v. 37, n. 2 (February 2002).
- (2012): Characterization of fracture patterns and hygric properties for moisture flow modelling in cracked concrete. In: Construction and Building Materials, v. 34 (September 2012).
- (2013): Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emission. In: Construction and Building Materials, v. 38 (January 2013).
- (2017): Hygrothermal properties of bio-insulation building materials based on bamboo fibers and bio-glues. In: Construction and Building Materials, v. 155 (November 2017).
- (2015): Factors governing the development of moisture disorders for integration into building performance simulation. In: Journal of Building Engineering, v. 3 (September 2015).
- (2013): Characterisation of concrete and mortar cracking by digital image correlation and acoustic emission. In: European Journal of Environmental and Civil Engineering, v. 17, n. 6 (June 2013).
- (2018): Building bio-insulation materials based on bamboo powder and bio-binders. In: Construction and Building Materials, v. 186 (October 2018).
Structurae cooperates with
