Kay Wille 
- (2024): Effect of rebar ratio, rebar diameter, cover thickness, and fiber shape on flexural and cracking behavior of rebar-reinforced UHPC beams. In: Engineering Structures, v. 321 (December 2024).
- (2024): Resource-efficient design of ultra-high performance concretes. In: Journal of Building Engineering, v. 92 (September 2024).
- (2024): Nanosilica enhanced ultra-high performance concrete through hydrochloride acid or polyethylene glycol stabilization. In: Construction and Building Materials, v. 425 (April 2024).
- (2023): Stabilizing dispersed colloidal nanosilica exposed to an ultra-high performance concrete environment. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Effects of the expansion mechanisms on the pyrrhotite-induced deterioration of concrete foundations. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Time-dependent properties of steam cured non-proprietary ultra high-performance concretes. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2021): Material based dynamic increase factor models for UHP-FRC under compression and tension. In: Construction and Building Materials, v. 310 (December 2021).
- (2020): Experimental Investigation on Flexural Behavior of Reinforced Ultra High Performance Concrete Low-Profile T-Beams. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 January 2020).
- (2018): Evaluation of resonance acoustic mixing technology using ultra high performance concrete. In: Construction and Building Materials, v. 164 (March 2018).
- (2018): Influence of matrix and pore system characteristics on the durability of pervious concrete. In: Construction and Building Materials, v. 162 (February 2018).
- (2018): Material efficiency in the design of UHPC paste from a life cycle point of view. In: Construction and Building Materials, v. 160 (January 2018).
- (2011): Testing of Cementitious Materials under High-Strain-Rate Tensile Loading Using Elastic Strain Energy. In: Journal of Engineering Mechanics (ASCE), v. 137, n. 4 (April 2011).
- (2019): Finite element study of headed shear studs embedded in ultra-high performance concrete. In: Engineering Structures, v. 188 (June 2019).
- (2019): Durability Evaluation of Headed Shear Studs Embedded in Ultrahigh-Performance Concrete via Electrochemical Corrosion. In: Journal of Bridge Engineering (ASCE), v. 24, n. 5 (May 2019).
- (2018): Design considerations for headed shear studs embedded in ultra-high performance concrete as part of a novel bridge repair method. In: Journal of Constructional Steel Research, v. 149 (October 2018).
- (2016): Numerical Investigation of the Effects of Pulse Shaper, Lateral Inertia, and Friction on the Calculated Strain-Rate Sensitivity of UHP-FRC Using a Split Hopkinson Pressure Bar. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 11 (November 2016).
- (2016): Equal Arc Segment Method for Averaging Data Plots Exemplified for Averaging Stress versus Strain Curves of Pervious Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 1 (January 2016).
- (2015): Material efficiency in the design of ultra-high performance concrete. In: Construction and Building Materials, v. 86 (July 2015).
- (2015): Material design and characterization of high performance pervious concrete. In: Construction and Building Materials, v. 98 (November 2015).
- (2016): Compression response of normal and high strength pervious concrete. In: Construction and Building Materials, v. 109 (April 2016).
- (2016): Influence of pore tortuosity on hydraulic conductivity of pervious concrete: Characterization and modeling. In: Construction and Building Materials, v. 125 (October 2016).
- (2017): Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar (SHPB) using pulse shaping technique. In: Construction and Building Materials, v. 144 (July 2017).
- (2017): Influence of volume fraction and orientation of fibers on the pullout behavior of reinforcement bar embedded in ultra high performance concrete. In: Construction and Building Materials, v. 146 (August 2017).
- (2015): Tensile load capacity analysis of perforated reinforcement sheet. In: Materials and Structures, v. 48, n. 1-2 (January 2015).
- (2012): Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing. In: Materials and Structures, v. 45, n. 3 (March 2012).
- (2011): Strain-hardening UHP-FRC with low fiber contents. In: Materials and Structures, v. 44, n. 3 (April 2011).
- (2014): Fiber distribution and orientation in UHP-FRC beams and their effect on backward analysis. In: Materials and Structures, v. 47, n. 11 (November 2014).
- (2018): Push-out behavior of headed shear studs welded on thin plates and embedded in UHPC. In: Engineering Structures, v. 173 (October 2018).
- (2017): Experimental Study of UHPC Repair for Corrosion-Damaged Steel Girder Ends. In: Journal of Bridge Engineering (ASCE), v. 22, n. 8 (August 2017).
- (2018): Comparative experimental investigations on the compressive impact behavior of fiber-reinforced ultra high-performance concretes using split Hopkinson pressure bar. In: Construction and Building Materials, v. 191 (December 2018).
Structurae cooperates with
