0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Donald W. White ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Slein, Ryan / Kamath, Ajit M. / Phillips, Matthew / Toğay, Oğuzhan / Sherman, Ryan J. / White, Donald W. (2024): Flexural resistance of thin-web singly-symmetric steel I-sections exhibiting early tension flange yielding. In: Journal of Constructional Steel Research, v. 221 (October 2024).

    https://doi.org/10.1016/j.jcsr.2024.108831

  2. Latif, Wajahat / White, Donald W. (2022): Flange Local Buckling Resistance and Local–Global Buckling Interaction in Slender-Flange Welded I-Section Beams. In: Engineering Journal, v. 59, n. 2 (June 2022).

    https://doi.org/10.62913/engj.v59i2.1187

  3. White, Donald W. / Surovek, Andrea / Chang, Ching-Jen (2007): Direct Analysis and Design Using Amplified First-Order Analysis Part II: Moment Frames and General Framing Systems. In: Engineering Journal, v. 44, n. 4 (December 2007).

    https://doi.org/10.62913/engj.v44i4.920

  4. White, Donald W. / Surovek, Andrea / Kim, Sang-Cheol (2007): Direct Analysis and Design Using Amplified First-Order Analysis Part I: Combined Braced and Gravity Framing Systems. In: Engineering Journal, v. 44, n. 4 (December 2007).

    https://doi.org/10.62913/engj.v44i4.921

  5. Slein, Ryan / Jeong, Woo Yong / White, Donald W. (2022): A Critical Evaluation of Moment Gradient (Cb) Factror Calculation Procedures for Singly Symmetric I-Section Members. In: Engineering Journal, v. 59, n. 4 (December 2022).

    https://doi.org/10.62913/engj.v59i4.1304

  6. Subramanian, Lakshmi / Jeong, Woo Yong / Yellepeddi, Raja / White, Donald W. (2018): Assessment of I-Section Member LTB Resistances Considering Experimental Test Data and Practical Inelastic Buckling Design Calculations. In: Engineering Journal, v. 55, n. 1 (March 2018).

    https://doi.org/10.62913/engj.v55i1.1125

  7. White, Donald W. / Hajjar, Jerome F. (1991): Application of Second-Order Elastic Analysis in LRFD: Research to Practice. In: Engineering Journal, v. 28, n. 4 (December 1991).

    https://doi.org/10.62913/engj.v28i4.579

  8. Hajjar, Jerome F. / White, Donald W. (1994): The Accuracy of Column Stability Calculations in Unbraced Frames and the Influence of Columns with Effective Length Factors Less Than One. In: Engineering Journal, v. 31, n. 3 (September 1994).

    https://doi.org/10.62913/engj.v31i3.629

  9. Phillips, Matthew / Slein, Ryan / Sherman, Ryan J. / White, Donald W. (2023): Experimental investigation of doubly-symmetric built-up I–girders subjected to high moment gradient. In: Engineering Structures, v. 283 (May 2023).

    https://doi.org/10.1016/j.engstruct.2023.115724

  10. Slein, Ryan / Kamath, Ajit M. / Phillips, Matthew / Sherman, Ryan J. / Scott, David W. / White, Donald W. (2023): Experimental and analytical assessment of LTB resistance of built-up steel I-section members. In: Journal of Constructional Steel Research, v. 204 (May 2023).

    https://doi.org/10.1016/j.jcsr.2022.107771

  11. White, Donald W. / Slein, Ryan / Toğay, Oğuzhan (2020): Advancements in the stability design of steel frames considering general non‐prismatic members. Extended Keynote of SDSS 2019. In: Steel Construction, v. 13, n. 1 (February 2020).

    https://doi.org/10.1002/stco.201900048

  12. White, Donald W. (1996): Comprehensive performance assessment of building structural systems: research to practice. In: Engineering Structures, v. 18, n. 10 (October 1996).

    https://doi.org/10.1016/0141-0296(96)00004-1

  13. White, Donald W. / Hajjar, Jerome F. (1997): Buckling models and stability design of steel frames: a unified approach. In: Journal of Constructional Steel Research, v. 42, n. 3 (June 1997).

    https://doi.org/10.1016/s0143-974x(97)00014-x

  14. White, Donald W. / Hajjar, Jerome F. (1997): Accuracy and simplicity of alternative procedures for stability design of steel frames. In: Journal of Constructional Steel Research, v. 42, n. 3 (June 1997).

    https://doi.org/10.1016/s0143-974x(97)00015-1

  15. Barth, Karl E. / White, Donald W. / Righman, Jennifer E. / Yang, Lili (2005): Evaluation of web compactness limits for singly and doubly symmetric steel I-girders. In: Journal of Constructional Steel Research, v. 61, n. 10 (October 2005).

    https://doi.org/10.1016/j.jcsr.2005.03.002

  16. Bakhtiary, Esmaeel / Lee, Seo-Hun / Scott, David W. / Stewart, Lauren K. / White, Donald W. (2017): Evaluation of Guardrail Posts Installed in Asphalt Mow Strips by Static Finite Element Simulation. In: Open Journal of Civil Engineering, v. 7, n. 1 ( 2017).

    https://doi.org/10.4236/ojce.2017.71009

  17. Moni, Sheloney / White, Donald W. (1996): FrameView: Object-Oriented Visualization System for Frame Analysis. In: Journal of Computing in Civil Engineering, v. 10, n. 4 (October 1996).

    https://doi.org/10.1061/(asce)0887-3801(1996)10:4(276)

  18. White, Donald W. / Jeong, Woo Yong / Toğay, Oğuzhan (2016): Comprehensive stability design of planar steel members and framing systems via inelastic buckling analysis. In: International Journal of Steel Structures, v. 16, n. 4 ( 2016).

    https://doi.org/10.1007/s13296-016-0070-3

  19. White, Donald W. / Jung, Se-Kwon (2007): Effect of web distortion on the buckling strength of noncomposite discretely-braced steel I-section members. In: Engineering Structures, v. 29, n. 8 (August 2007).

    https://doi.org/10.1016/j.engstruct.2006.09.020

  20. Barth, Karl E. / White, Donald W. (1998): Finite element evaluation of pier moment-rotation characteristics in continuous-span steel I Girders. In: Engineering Structures, v. 20, n. 8 (August 1998).

    https://doi.org/10.1016/s0141-0296(97)00087-4

  21. Chang, Ching-Jen / White, Donald W. (2008): An assessment of modeling strategies for composite curved steel I-girder bridges. In: Engineering Structures, v. 30, n. 11 (November 2008).

    https://doi.org/10.1016/j.engstruct.2008.04.011

  22. Teh, Lip H. / Hsiao, Kuo-Mo / White, Donald W. / Ziemian, Ronald D. / Chan, Siu-Lai / Gu, Jian-Xin (2001): Exact Tangent Stiffness for Imperfect Beam-Column Members. In: Journal of Structural Engineering (ASCE), v. 127, n. 12 (December 2001).

    https://doi.org/10.1061/(asce)0733-9445(2001)127:12(1490)

  23. Surovek-Maleck, Andrea E. / White, Donald W. (2004): Alternative Approaches for Elastic Analysis and Design of Steel Frames. I: Overview. In: Journal of Structural Engineering (ASCE), v. 130, n. 8 (August 2004).

    https://doi.org/10.1061/(asce)0733-9445(2004)130:8(1186)

  24. Surovek-Maleck, Andrea E. / White, Donald W. (2004): Alternative Approaches for Elastic Analysis and Design of Steel Frames. II: Verification Studies. In: Journal of Structural Engineering (ASCE), v. 130, n. 8 (August 2004).

    https://doi.org/10.1061/(asce)0733-9445(2004)130:8(1197)

  25. Alemdar, Bülent N. / White, Donald W. (2005): Displacement, Flexibility, and Mixed Beam–Column Finite Element Formulations for Distributed Plasticity Analysis. In: Journal of Structural Engineering (ASCE), v. 131, n. 12 (December 2005).

    https://doi.org/10.1061/(asce)0733-9445(2005)131:12(1811)

  26. Eröz, Murat / White, Donald W. / DesRoches, Reginald (2008): Direct Analysis and Design of Steel Frames Accounting for Partially Restrained Column Base Conditions. In: Journal of Structural Engineering (ASCE), v. 134, n. 9 (September 2008).

    https://doi.org/10.1061/(asce)0733-9445(2008)134:9(1508)

  27. Subramanian, Lakshmi / White, Donald W. (2017): Flexural Resistance of Longitudinally Stiffened I-Girders. I: Yield Limit State. In: Journal of Bridge Engineering (ASCE), v. 22, n. 1 (January 2017).

    https://doi.org/10.1061/(asce)be.1943-5592.0000975

  28. Subramanian, Lakshmi / White, Donald W. (2017): Flexural Resistance of Longitudinally Stiffened I-Girders. II: LTB and FLB Limit States. In: Journal of Bridge Engineering (ASCE), v. 22, n. 1 (January 2017).

    https://doi.org/10.1061/(asce)be.1943-5592.0000976

  29. White, Donald W. / Hajjar, Jerome F. (1997): Design of steel frames without consideration of effective length. In: Engineering Structures, v. 19, n. 10 (October 1997).

    https://doi.org/10.1016/s0141-0296(97)00161-2

  30. Surovek, Andrea E. / White, Donald W. / leon, Roberto T. (2005): Direct Analysis for Design Evaluation of Partially Restrained Steel Framing Systems. In: Journal of Structural Engineering (ASCE), v. 131, n. 9 (September 2005).

    https://doi.org/10.1061/(asce)0733-9445(2005)131:9(1376)

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine