W. Jason Weiss 
- (2023): Using Neutron Radiography to Assess Parameters Associated with Water Permeability Testing. In: Advances in Civil Engineering Materials, v. 12, n. 1 (13 March 2023).
- (2023): Measuring damaging Freeze-Thaw cycles in the field. In: Construction and Building Materials, v. 387 (July 2023).
- (2019): Toward the prediction of pore volumes and freeze-thaw performance of concrete using thermodynamic modelling. In: Cement and Concrete Research, v. 124 (October 2019).
- (2022): Heat of Hydration, Shrinkage, and Flexural Strength of Portland Limestone Cement Mortar. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 January 2022).
- (2022): The Influence of Specimen Preparation on the Results of the Ball-on-Three-Ball (B3B) Test for Cementitious Materials. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 January 2022).
- (2022): Electrical and Transport Properties of Cement Mortar Made Using Portland Limestone Cement. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 January 2022).
- (2017): Effects of Concrete Composition on Resistance to Microbially Induced Corrosion. In: Journal of Environmental Engineering (ASCE), v. 143, n. 6 (June 2017).
- (2020): The Ball-on-Three-Ball (B3B) Test – Application to Cement Paste and Mortar. In: Advances in Civil Engineering Materials, v. 9, n. 1 (28 January 2020).
- (2020): Evaluating the efficacy of antimicrobial additives against biogenic acidification in simulated wastewater exposure solutions. In: RILEM Technical Letters, v. 4 (February 2020).
- (2000): Influence of Specimen Size/Geometry on Shrinkage Cracking of Rings. In: Journal of Engineering Mechanics (ASCE), v. 126, n. 1 (January 2000).
- (2000): Predicting Shrinkage Stress Field in Concrete Slab on Elastic Subgrade. In: Journal of Engineering Mechanics (ASCE), v. 126, n. 1 (January 2000).
- (2000): Assessing Damage in Corroded Reinforced Concrete Using Acoustic Emission. In: Journal of Engineering Mechanics (ASCE), v. 126, n. 3 (March 2000).
- (1998): Shrinkage Cracking of Restrained Concrete Slabs. In: Journal of Engineering Mechanics (ASCE), v. 124, n. 7 (July 1998).
- (2017): Water Absorption in Cementitious Materials at Different Temperatures. In: Advances in Civil Engineering Materials, v. 6, n. 1 (December 2017).
- (2019): Using Neutron Radiography to Quantify the Settlement of Fresh Concrete. In: Advances in Civil Engineering Materials, v. 8, n. 1 (July 2019).
- (2019): Examining the Influence of the Degree of Saturation on Length Change and Freeze-Thaw Damage. In: Advances in Civil Engineering Materials, v. 8, n. 1 (July 2019).
- (2018): Prediction of Chloride Ingress in Saturated Concrete Using Formation Factor and Chloride Binding Isotherm. In: Advances in Civil Engineering Materials, v. 7, n. 1 (December 2018).
- (2017): Accounting for Water Stored in Superabsorbent Polymers in Increasing the Degree of Hydration and Reducing the Shrinkage of Internally Cured Cementitious Mixtures. In: Advances in Civil Engineering Materials, v. 6, n. 1 (December 2017).
- (2017): Hydration of Cement Pastes Containing Accelerator at Various Temperatures: Application to High Early Strength Pavement Patching. In: Advances in Civil Engineering Materials, v. 6, n. 2 (July 2017).
- (2019): A two-step multiscale model to predict early age strength development of cementitious composites considering competing fracture mechanisms. In: Construction and Building Materials, v. 208 (May 2019).
- (2019): Relating the Formation Factor and Chloride Binding Parameters to the Apparent Chloride Diffusion Coefficient of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 2 (February 2019).
- (2012): Special Section on Advances in Internally Cured Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 8 (August 2012).
- (2010): Experimental and Numerical Quantification of Plastic Settlement in Fresh Cementitious Systems. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 10 (October 2010).
- (2018): A nearly self-sufficient framework for modelling reactive-transport processes in concrete. In: Materials and Structures, v. 52, n. 1 (December 2018).
- (2014): The influence of deicing salt exposure on the gas transport in cementitious materials. In: Construction and Building Materials, v. 67 (September 2014).
- (2015): Multi-scale investigation of the performance of limestone in concrete. In: Construction and Building Materials, v. 75 (January 2015).
- (2016): Using neutron radiography to assess water absorption in air entrained mortar. In: Construction and Building Materials, v. 110 (May 2016).
- (2016): Performance of carbonated calcium silicate based cement pastes and mortars exposed to NaCl and MgCl 2 deicing salt. In: Construction and Building Materials, v. 111 (May 2016).
- (2017): Numerical simulation of the freeze–thaw behavior of mortar containing deicing salt solution. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2013): Application of ultrasonic P-wave reflection to measure development of early-age cement-paste properties. In: Materials and Structures, v. 46, n. 6 (June 2013).
Structurae cooperates with
