Zhiyong Wang
- (2025): Shear and tensile bonding performance of prefabricated UHPC and cast-in-place NC interface in composite girder bridges. In: Construction and Building Materials, v. 462 (February 2025).
- (2024): Early age time-dependent mechanical properties of 3D-printed concrete with coarse aggregates. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): Additive manufacturing in construction using unmanned aerial vehicle: Design, implementation, and material properties. In: Journal of Building Engineering, v. 98 (December 2024).
- : Mechanical and metallurgical assessment of a submerged arc welded surfaced rail. In: International Journal of Transportation Science and Technology.
- (2024): Compressive strength prediction of high-performance concrete: Integrating multi-ingredient influences and mix proportion insights. In: Construction and Building Materials, v. 451 (November 2024).
- (2025): Interfacial dynamic impermeable crack analysis in dissimilar piezoelectric materials by a new interaction integral. In: Composite Structures, v. 352 (January 2025).
- (2024): Predicting peak tensile stress in mesoscale concrete considering size effects: A data-physical hybrid-driven approach. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): A numerical algorithm for damage progression of reinforced concrete bridge piers during air temperature and solar radiation cycles. In: Engineering Structures, v. 319 (November 2024).
- (2024): Effect of w/b ratio and supplemental cementitious material on the chloride penetration and corrosion resistance of ferroaluminate cement concrete. In: Construction and Building Materials, v. 431 (June 2024).
- (2023): Prefab-Net: Segmentation of prefabricated building from satellite imagery with deep neural network. In: Journal of Physics: Conference Series, v. 2621, n. 1 (1 October 2023).
- (2024): A Mix Design Method of Flexible Pavement Cement Concrete Based on Rubber and Fiber Coblending. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 2 (February 2024).
- (2024): Numerical investigations of seismic responses of non-isolated and isolated double-layer cylindrical reticulated shells with substructure. In: Structures, v. 59 (January 2024).
- : Influence of high temperature on the compression and bending properties of AASCM. In: Magazine of Concrete Research.
- (2023): Fracture Mechanism of Steel Q370 under Strong Corrosion Based on Surface Morphology. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (June 2023).
- (2023): Push-Out experiments on bearing capacity of perfobond leiste shear connectors after hydrochloric acid corrosion. In: Advances in Structural Engineering, v. 26, n. 9 (May 2023).
- (2023): Reconstruction of the meso-scale concrete model using a deep convolutional generative adversarial network (DCGAN). In: Construction and Building Materials, v. 370 (March 2023).
- (2022): Longitudinal connection effect on initial support steel frames in tunnels—Take the traffic tunnels as examples. In: Underground Space, v. 7, n. 4 (August 2022).
- (2022): Numerical study on the critical criterion for predicting the plug-holing under lateral mechanical exhaust in tunnel fires: Considering the effect of smoke flow in longitudinal direction. In: Tunnelling and Underground Space Technology, v. 128 (October 2022).
- (2022): Penetration trajectory of rigid projectile in the heterogeneous meso-scale concrete target. In: Advances in Structural Engineering, v. 25, n. 7 (April 2022).
- (2022): Molecular Structural Characterization and Bond-Breakage Investigation of Calcium Silicate Hydrate Gel Intercalated by Ionized Surfactants Subjected to Uniaxial Tensile Deformation. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 7 (July 2022).
- (2021): The influence from steel bar on concrete fracture behavior under different impact velocities. In: Structural Concrete, v. 22, n. 6 (December 2021).
- (2023): Deformation control method for large-section tunnel construction in fractured carbonaceous slate. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 176, n. 2 (April 2023).
- (2020): Tensile properties of a hybrid bonded/bolted joint: Parameter study. In: Composite Structures, v. 245 (August 2020).
- (2018): 3D meso-scale modeling of reinforcement concrete with high volume fraction of randomly distributed aggregates. In: Construction and Building Materials, v. 164 (March 2018).
- (2020): Exposure level and influential factors of HCHO, BTX and TVOC from the interior redecoration of residences. In: Building and Environment, v. 168 (January 2020).
- (2019): A study on performance of distributed piezoelectric composite actuator using Galerkin method. In: Smart Materials and Structures, v. 28, n. 10 (29 August 2019).
- (2018): Numerical investigations on the effect of reinforcement on penetration resistance of concrete slabs using a 3D meso-scale method. In: Construction and Building Materials, v. 188 (November 2018).
Structurae cooperates with
