Yanshuai Wang 
- (2024): Electrical conductive mortar based on expanded graphite for auxiliary anode. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): In-situ evaluation on existing RC beam strengthened with GFRP-reinforced UHPC overlay. In: Construction and Building Materials, v. 429 (May 2024).
- (2024): Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Design and characterization of carbonate-stone-powder-based foam concrete. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): Influence of slag powder on the mechanical and electrical properties of CECM. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): The influence of carbon dioxide concentration on carbonation behavior in cement paste. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Corrosion protection of steel bar enabled by monofluorophosphate-bearing composites with sustained-release capability. In: Journal of Building Engineering, v. 80 (December 2023).
- (2023): Limestone powder activated by sodium aluminate: Hydration and microstructure. In: Construction and Building Materials, v. 368 (March 2023).
- (2023): Lithium slag-based geopolymer synthesized with hybrid solid activators. In: Construction and Building Materials, v. 365 (February 2023).
- (2022): Engineering and micro-properties of alkali-activated slag pastes with Bayer red mud. In: Construction and Building Materials, v. 351 (October 2022).
- (2022): Fly ash-based artificial aggregates synthesized through alkali-activated cold-bonded pelletization technology. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Visualization and quantification of water penetration in cement pastes with different crack sizes. In: Construction and Building Materials, v. 341 (July 2022).
- (2021): Alkali-activated artificial aggregates fabricated by red mud and fly ash: Performance and microstructure. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Positive roles of lime mud in blended Portland cement. In: Construction and Building Materials, v. 328 (April 2022).
- (2022): Influence mechanisms of fly ash in magnesium ammonium phosphate cement. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Experimental comparisons between one-part and normal (two-part) alkali-activated slag binders. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Core-Shell structured ceramsite made by excavated soil and expanded perlite through cold-bonded technology. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Compositions and microstructures of hardened cement paste with carbonation curing and further water curing. In: Construction and Building Materials, v. 267 (January 2021).
- (2021): Properties and microstructure of lithium-slag-based geopolymer by one-part mixing method. In: Construction and Building Materials, v. 273 (March 2021).
- (2014): Electrochemical impedance study on steel corrosion in the simulated concrete system with a novel self-healing microcapsule. In: Construction and Building Materials, v. 56 (April 2014).
- (2016): Characterization and evaluation of the surface free energy for cementitious materials. In: Construction and Building Materials, v. 110 (May 2016).
- (2016): Feasibility study on corrosion protection of steel bar in a self-immunity system based on increasing OH− content. In: Construction and Building Materials, v. 125 (October 2016).
Structurae cooperates with
