Yan Wang 
- (2024): Research on Collapse Risk Assessment of Karst Tunnels Based on BN Self-Learning. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2024): Preconcentrating sensor systems toward indoor low-concentration VOC detection by goal-oriented, sequential, inverse design strategy. In: Building and Environment, v. 254 (April 2024).
- (2024): Simulation analysis of microwave sintering of recycled building bricks based on three-phase porous medium model. In: Construction and Building Materials, v. 414 (February 2024).
- (2023): Recycled brick powder from construction and demolition waste as waterborne coating filler with robust scrubbing resistance. In: Construction and Building Materials, v. 385 (July 2023).
- (2024): Predicting survival time for cold exposure by thermoregulation modeling. In: Building and Environment, v. 249 (February 2024).
- (2023): Seismic behavior of steel frames with different joints: Shaking table test and finite element analysis. In: Journal of Building Engineering, v. 70 (July 2023).
- (2023): Spatial Quality Evaluation of Historical Blocks Based on Street View Image Data: A Case Study of the Fangcheng District. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2023): A Simulation Study on the Impact of Abandoned Trolley Cases on Pedestrian Evacuation. In: KSCE Journal of Civil Engineering, v. 27, n. 3 (7 January 2023).
- (2023): Slip-Line Solution for the Active Earth Pressure of Narrow and Layered Backfills against Inverted T-Type Retaining Walls Rotating about the Base. In: International Journal of Geomechanics, v. 23, n. 5 (May 2023).
- (2023): A review on new methods of recycling waste carbon fiber and its application in construction and industry. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): The Seepage-Destruction Mechanism of Water Inrush Channel of Sandstone Fault Filling Using the EDEM-Fluent Method. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2015): Research on Indoor Thermal Environment Improvement of Lightweight Building Integrated with Phase Change Material under Different Climate Conditions. In: Procedia Engineering, v. 121 ( 2015).
- (2022): Preparing Urban Curbside for Increasing Mobility-on-Demand Using Data-Driven Agent-Based Simulation: Case Study of City of Gainesville, Florida. In: Journal of Management in Engineering (ASCE), v. 38, n. 3 (May 2022).
- (2022): Seismic behaviour of prefabricated self-centring steel frames with different energy dissipation devices. In: Structures, v. 38 (April 2022).
- (2021): Research on the Wing-Type Antiscour Device of Pier Based on Scour Test and Numerical Simulation. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2022): Research on the influence of building convex exit on crowd evacuation and its design optimization. In: Building Simulation, v. 15, n. 4 (22 January 2022).
- (2022): Performance optimization of the obstacle to corner bottleneck under emergency evacuation. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Precast steel—UHPC lightweight composite bridge for accelerated bridge construction. In: Frontiers of Structural and Civil Engineering, v. 15, n. 2 (April 2021).
- (2009): Sorption Behavior and Mechanism of Pb(II) on Chinese Loess. In: Journal of Environmental Engineering (ASCE), v. 135, n. 1 (January 2009).
- (2020): Spatial Stress of the Pier–Girder Rigid Region of a Continuous Rigid-Frame Bridge with V-Shaped Piers in Two Directions. In: Journal of Highway and Transportation Research and Development (English Edition), v. 14, n. 1 (March 2020).
- (2017): Seasonal variations and exposure levels of carbon monoxide in a naturally ventilated residential underground parking lot. In: Science and Technology for the Built Environment, v. 24, n. 1 (October 2017).
- (2016): Research on thermal performance improvement of lightweight buildings by integrating with phase change material under different climate conditions. In: Science and Technology for the Built Environment, v. 23, n. 2 (December 2016).
- (2021): Quasi-static Compression and Hygrothermal Stability of BMI/CE Co-cured Composite Lattice Cylindrical Shell. In: Composite Structures, v. 257 (February 2021).
- (2013): Preparation of Innovative Porous Ultra-Lightweight Ceramsite by Dehydrated Sewage Sludge (DSS) and Yellow River Sediments (YRS) and its Characteristics of Ceramsite Affected by YRS Addition. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Preparation and properties of self-compacting alkali-activated slag repair mortar. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): The performance of a closed cavity radiation system with built-in heat exchanger. In: Building and Environment, v. 174 (May 2020).
- (2017): Seasonal patterns of PM10, PM2.5, and PM1.0 concentrations in a naturally ventilated residential underground garage. In: Building and Environment, v. 124 (November 2017).
- (2016): Permeability and Direct Shear Tests Characteristics of Railway Subballast. In: The Open Civil Engineering Journal, v. 9, n. 1 (March 2016).
- (2016): Seismic performance of reinforced concrete columns after freeze–thaw cycles. In: Construction and Building Materials, v. 102 (January 2016).
- (2018): The Shaking table test and numerical simulation of a superimposed reinforced concrete shear wall structure. In: The Structural Design of Tall and Special Buildings, v. 27, n. 2 (10 February 2018).
Structurae cooperates with
