0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Y. C. Wang

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Feng, M. / Wang, Y. C. / Davies, J. M. (2004): A numerical imperfection sensitivity study of cold-formed thin-walled tubular steel columns at uniform elevated temperatures. In: Thin-Walled Structures, v. 42, n. 4 (April 2004).

    https://doi.org/10.1016/j.tws.2003.12.005

  2. Wong, A. F. L. / Wang, Y. C. (1998): Prediction of The Fundamental Transverse Natural Frequency of Tall Building Structures Using Maximum Static Deflection. In: Journal of Sound and Vibration, v. 216, n. 5 (October 1998).

    https://doi.org/10.1006/jsvi.1998.1797

  3. Roberts, M. J. / Davies, J. M. / Wang, Y. C. (2021): Numerical analysis of a clad portal frame structure tested to destruction. In: Structures, v. 33 (October 2021).

    https://doi.org/10.1016/j.istruc.2021.06.098

  4. Elsawaf, S. / Wang, Y. C. / Mandal, P. (2011): Numerical modelling of restrained structural subassemblies of steel beam and CFT columns connected using reverse channels in fire. In: Engineering Structures, v. 33, n. 4 (April 2011).

    https://doi.org/10.1016/j.engstruct.2010.12.043

  5. Ozyurt, E. / Wang, Y. C. (2019): A numerical investigation of static resistance of welded planar steel tubular joints under in-plane and out-of-plane bending at elevated temperatures. In: Engineering Structures, v. 199 (November 2019).

    https://doi.org/10.1016/j.engstruct.2019.109622

  6. Wang, Y. C. / Ozyurt, E. (2021): Static resistance of axially loaded multiplanar gap KK-joints of Circular Hollow sections at elevated temperatures. In: Engineering Structures, v. 229 (February 2021).

    https://doi.org/10.1016/j.engstruct.2020.111676

  7. Yu, J. L. / Wang, Y. C. (2020): Punching Shear Behavior of an Innovative Connection between Steel-Tubular Column and Flat-Concrete Slab. In: Journal of Structural Engineering (ASCE), v. 146, n. 8 (August 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002724

  8. Othuman Mydin, Md Azree / Wang, Y. C. (2011): Structural performance of lightweight steel-foamed concrete–steel composite walling system under compression. In: Thin-Walled Structures, v. 49, n. 1 (January 2011).

    https://doi.org/10.1016/j.tws.2010.08.007

  9. Wang, Y. C. / Yin, Y. Z. (2006): A simplified analysis of catenary action in steel beams in fire and implications on fire resistant design. In: Steel and Composite Structures, v. 6, n. 5 (October 2006).

    https://doi.org/10.12989/scs.2006.6.5.367

  10. Sencu, R. M. / Wang, Y. C. / Yang, J. / Lam, D. (2019): Performance evaluation of demountable shear connectors with collar step at ambient and elevated temperatures. In: Engineering Structures, v. 194 (September 2019).

    https://doi.org/10.1016/j.engstruct.2019.05.059

  11. Wang, Y. C. (1997): Some considerations in the design of unprotected concrete-filled steel tubular columns under fire conditions. In: Journal of Constructional Steel Research, v. 44, n. 3 (December 1997).

    https://doi.org/10.1016/s0143-974x(97)00060-6

  12. Wang, Y. C. (2000): A simple method for calculating the fire resistance of concrete-filled CHS columns. In: Journal of Constructional Steel Research, v. 54, n. 3 (June 2000).

    https://doi.org/10.1016/s0143-974x(99)00061-9

  13. Yin, Y. Z. / Wang, Y. C. (2003): Numerical simulations of the effects of non-uniform temperature distributions on lateral torsional buckling resistance of steel I-beams. In: Journal of Constructional Steel Research, v. 59, n. 8 (August 2003).

    https://doi.org/10.1016/s0143-974x(03)00003-8

  14. Yin, Y. Z. / Wang, Y. C. (2004): A numerical study of large deflection behaviour of restrained steel beams at elevated temperatures. In: Journal of Constructional Steel Research, v. 60, n. 7 (July 2004).

    https://doi.org/10.1016/j.jcsr.2003.09.005

  15. Ding, J. / Wang, Y. C. (2008): Realistic modelling of thermal and structural behaviour of unprotected concrete filled tubular columns in fire. In: Journal of Constructional Steel Research, v. 64, n. 10 (October 2008).

    https://doi.org/10.1016/j.jcsr.2007.09.014

  16. Jones, M. H. / Wang, Y. C. (2011): Shear and bending behaviour of fin plate connection to concrete filled rectangular steel tubular column — Development of a simplified calculation method. In: Journal of Constructional Steel Research, v. 67, n. 3 (March 2011).

    https://doi.org/10.1016/j.jcsr.2010.10.006

  17. Al-Thairy, Haitham / Wang, Y. C. (2014): A simplified analytical method for predicting the critical velocity of vehicle impact on steel columns. In: Journal of Constructional Steel Research, v. 92 (January 2014).

    https://doi.org/10.1016/j.jcsr.2013.10.014

  18. Al-Thairy, Haitham / Wang, Y. C. (2014): Simplified FE vehicle model for assessing the vulnerability of axially compressed steel columns against vehicle frontal impact. In: Journal of Constructional Steel Research, v. 102 (November 2014).

    https://doi.org/10.1016/j.jcsr.2014.07.005

  19. Wang, Y. C. / Restrepo, J. I. (2001): Response of RC T-Beams Strengthened for Flexure with Staggered CFRP Plates. In: Journal of Composites for Construction, v. 5, n. 3 (August 2001).

    https://doi.org/10.1061/(asce)1090-0268(2001)5:3(188)

  20. Wang, C. M. / Wang, Y. C. / Reddy, J. N. (2002): Problems and remedy for the Ritz method in determining stress resultants of corner supported rectangular plates. In: Computers & Structures, v. 80, n. 2 (January 2002).

    https://doi.org/10.1016/s0045-7949(01)00168-7

  21. Wang, Y. C. / Salhab, B. (2009): Structural behaviour and design of lightweight structural panels using perforated cold-formed thin-walled sections under compression. In: International Journal of Steel Structures, v. 9, n. 1 ( 2009).

    https://doi.org/10.1007/bf03249480

  22. Wang, Y. C. / Moore, D. B. (1995): Steel frames in fire: analysis. In: Engineering Structures, v. 17, n. 6 (July 1995).

    https://doi.org/10.1016/0141-0296(95)00047-b

  23. Dai, X. H. / Wang, Y. C. / Bailey, C. G. (2010): Numerical modelling of structural fire behaviour of restrained steel beam–column assemblies using typical joint types. In: Engineering Structures, v. 32, n. 8 (August 2010).

    https://doi.org/10.1016/j.engstruct.2010.04.009

  24. Mollazadeh, M. H. / Wang, Y. C. (2014): New insights into the mechanism of load introduction into concrete-filled steel tubular column through shear connection. In: Engineering Structures, v. 75 (September 2014).

    https://doi.org/10.1016/j.engstruct.2014.06.002

  25. Wang, Y. C. (2005): Performance of steel-concrete composite structures in fire. In: Progress in Structural Engineering and Materials, v. 7, n. 2 ( 2005).

    https://doi.org/10.1002/pse.197

  26. Wang, Y. C. (2004): Postbuckling Behavior of Axially Restrained and Axially Loaded Steel Columns under Fire Conditions. In: Journal of Structural Engineering (ASCE), v. 130, n. 3 (March 2004).

    https://doi.org/10.1061/(asce)0733-9445(2004)130:3(371)

  27. Ozyurt, E. / Wang, Y. C. (2018): Resistance of Axially Loaded T- and X-Joints of Elliptical Hollow Sections at Elevated Temperatures – A Finite Element Study. In: Structures, v. 14 (June 2018).

    https://doi.org/10.1016/j.istruc.2018.01.004

  28. Yu, J. L. / Wang, Y. C. (2018): Punching Shear Behavior and Design of an Innovative Connection from Steel Tubular Column to Flat Concrete Slab. In: Journal of Structural Engineering (ASCE), v. 144, n. 9 (September 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0002111

  29. Wang, Y. C. / Kodur, V. K. R. (2000): Research Toward Use of Unprotected Steel Structures. In: Journal of Structural Engineering (ASCE), v. 126, n. 12 (December 2000).

    https://doi.org/10.1061/(asce)0733-9445(2000)126:12(1442)

  30. Wang, Y. C. / Choi, C. K. (2007): Steel and Composite Structures. Proceedings of the 3rd International Conference on Steel and Composite Structures, Manchester, UK 30 July-1 August 2007. Taylor & Francis, Abingdon-on-Thames (United Kingdom), ISBN 978-0-415-45141-3.
Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine