Xiao-Yong Wang 
- (2024): The influence and mechanism analysis of aluminum sulfate as an environmentally friendly early strength agent on the properties of cement-based materials. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): A Hydration-Based Integrated Model to Evaluate Properties Development and Sustainability of Oyster Shell Powder–Cement Binary Composites. In: Buildings, v. 14, n. 6 (19 June 2024).
- (2024): Optimizing and designing the effects of microwave pre-curing on the properties of ternary blended concrete with slag and fly ash using the simplex centroid method. In: Construction and Building Materials, v. 419 (March 2024).
- (2024): Improved high-temperature resistance of limestone calcined clay cement (LC3) paste with biochar: Multiscale evaluation and mechanistic analysis. In: Developments in the Built Environment, v. 18 (April 2024).
- (2014): Modeling of temperature history in the hardening of ultra-high-performance concrete. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 14, n. 3 (June 2014).
- (2023): Performance improvement of waste oyster-shell powder–cement binary system via carbonation curing. In: Journal of Building Engineering, v. 70 (July 2023).
- (2024): Innovative use of wet carbon conversion in alkali-activated slag: Improved microstructures and mechanical characteristics. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Optimum design of the quaternary composite binder considering strength, cost, and electrical resistivity. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2010): Modeling the hydration of concrete incorporating fly ash or slag. In: Cement and Concrete Research, v. 40, n. 7 (July 2010).
- (2022): Mixture Optimization of Sustainable Concrete with Silica Fume Considering CO2 Emissions and Cost. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2022): Influence of K+ and CO32− in activator on high-temperature performance of alkali-activated slag-ceramic powder binary blends. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Multi-technique investigation regarding the impact of cellulose nanofibers on ultra-high-performance concrete at the macroscopic and microscopic levels. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): Penetration properties and injecting conditions of corrosion inhibitor for concrete. In: Construction and Building Materials, v. 284 (May 2021).
- (2022): Optimal design of sustainable slag concrete considering sustained stress and carbonation resistance. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Performance of sustainable concrete made from waste oyster shell powder and blast furnace slag. In: Journal of Building Engineering, v. 47 (April 2022).
- (2021): Experimental study on optimum proportioning of Portland cements, limestone, metakaolin, and fly ash for obtaining quaternary cementitious composites. In: Case Studies in Construction Materials, v. 15 (December 2021).
- (2021): Hydration-strength-durability-workability of biochar-cement binary blends. In: Journal of Building Engineering, v. 42 (October 2021).
- (2021): Performance and sustainability of quaternary composite paste comprising limestone, calcined Hwangtoh clay, and granulated blast furnace slag. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Hydration Model and Evaluation of the Properties of Calcined Hwangtoh Binary Blends. In: International Journal of Concrete Structures and Materials, v. 15, n. 1 (7 January 2021).
- (2020): Optimal mix design of low-CO2 blended concrete with limestone powder. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): Impacts of climate change on optimal mixture design of blended concrete considering carbonation and chloride ingress. In: Frontiers of Structural and Civil Engineering, v. 14, n. 2 (March 2020).
- (2020): Increasing the early strength of high-volume Hwangtoh–cement systems using bassanite. In: Journal of Building Engineering, v. 30 (July 2020).
- (2019): Optimal Mixture Design of Low-CO2 High-Volume Slag Concrete Considering Climate Change and CO2 Uptake. In: International Journal of Concrete Structures and Materials, v. 13, n. 1 (January 2019).
- (2012): Modeling of chloride diffusion in a hydrating concrete incorporating silica fume. In: Computers and Concrete, v. 10, n. 5 (November 2012).
- (2019): Optimization of the Mixture Design of Low-CO2 High-Strength Concrete Containing Silica Fume. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2009): A model for predicting the carbonation depth of concrete containing low-calcium fly ash. In: Construction and Building Materials, v. 23, n. 2 (February 2009).
- (2012): Modeling of hydration kinetics in cement based materials considering the effects of curing temperature and applied pressure. In: Construction and Building Materials, v. 28 (March 2012).
- (2009): A model predicting carbonation depth of concrete containing silica fume. In: Materials and Structures, v. 42, n. 6 (July 2009).
- (2018): Modeling of Hydration, Strength Development, and Optimum Combinations of Cement-Slag-Limestone Ternary Concrete. In: International Journal of Concrete Structures and Materials, v. 12, n. 1 (October 2018).
- (2014): Modeling of hydration reactions to predict the properties of slag blended concrete. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 41, n. 5 (May 2014).
Structurae cooperates with
