Wenlong Wang
- (2024): Effects of Urea and Sodium Tripolyphosphate on the Hydration and Leaching of Cr(VI) in Solid Waste–Based Sulfoaluminate Cement. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 11 (November 2024).
- (2024): Effect of phosphorus impurities on sulfoaluminate cement-modified gypsum-based self-leveling mortar and improvement method. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Effect of pyroligneous acid as a novel bio-additive on the hydration mechanism of calcium sulfoaluminate cement and ordinary Portland cement. In: Construction and Building Materials, v. 439 (August 2024).
- (2024): Improving the performance of iron-rich calcium sulfoaluminate cement from municipal solid waste incineration fly ash through diverse pretreatment approaches. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Peridynamic simulation of engineered cementitious composites and concrete laminated structure under fatigue loading. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Preparing sulfoaluminate cement using phosphogypsum as the only calcium oxide source: Effects of fluoride impurities. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Preparation of a low-carbon plant-compatible ecological concrete with fertilizer self-release characteristics based on multi-solid waste co-recycling and its environmental impact. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Recent advances in sustainable lightweight foamed concrete incorporating recycled waste and byproducts: A review. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Properties and hydration characteristics of cementitious blends with two kinds of solid waste-based sulfoaluminate cement. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Research on hydration characteristics of OSR-GGBFS-FA alkali-activated materials. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Collaborative recycling of red mud and FGD-gypsum into multi-shell cold bonded lightweight aggregates: Synergistic effect, structure design and application in sustainable concrete. In: Construction and Building Materials, v. 379 (May 2023).
- (2023): Calcium sulphoaluminate cement from solid waste with nano-TiO2addition for high-efficiency CO2capture. In: Construction and Building Materials, v. 367 (February 2023).
- (2023): Preparation of architectural 3D printing material with a solid waste-derived sulfoaluminate matrix: A high-value conversion of solid waste. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2021): Effect of iron on the preparation of iron-rich calcium sulfoatablluminate cement using gypsum as the sole calcium oxide source and its incorporation into mineral phases. In: Construction and Building Materials, v. 290 (July 2021).
- (2023): Recycling of hazardous and industrial solid waste as raw materials for preparing novel high-temperature-resistant sulfoaluminate-magnesia aluminum spinel cement. In: Journal of Building Engineering, v. 64 (April 2023).
- (2022): Preparation and properties of alkali and sulfate coactivated ternary cementitious matrix and its application in high-strength cold bonded lightweight aggregates. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Effect of graphene oxide or triethanolamine-modified graphene oxide on the hydration of calcium sulfoaluminate cement. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): Investigation of hierarchical porous cold bonded lightweight aggregates produced from red mud and solid-waste-based cementitious material. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): Preparation and properties of ready-to-use low-density foamed concrete derived from industrial solid wastes. In: Construction and Building Materials, v. 287 (June 2021).
- (2021): Influence of water repellent on the property of solid waste based sulfoaluminate cement paste and its application in lightweight porous concrete. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Preparation of solid-waste-based pervious concrete for pavement: A two-stage utilization approach of coal gangue. In: Construction and Building Materials, v. 319 (February 2022).
- (2022): Leaching and solidification behavior of Cu2+, Cr3+ and Cd2+ in the hydration products of calcium sulfoaluminate cement. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): Heavy metal removal of solid waste source sulphoaluminate cement with graphene oxide. In: Construction and Building Materials, v. 303 (October 2021).
- (2020): Coordinated adjustment and optimization of setting time, flowability, and mechanical strength for construction 3D printing material derived from solid waste. In: Construction and Building Materials, v. 259 (October 2020).
- (2020): Mechanism analysis of pore structure and crystalline phase of thermal insulation bricks with high municipal sewage sludge content. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): Effect of CaO content in raw material on the mineral composition of ferric-rich sulfoaluminate clinker. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): Effect of CaSO4 batching in raw material on the iron-bearing mineral transition of ferric-rich sulfoaluminate cement. In: Construction and Building Materials, v. 250 (July 2020).
- (2019): Calcination of calcium sulphoaluminate cement using flue gas desulfurization gypsum as whole calcium oxide source. In: Construction and Building Materials, v. 228 (December 2019).
- (2019): Preparation of sulphoaluminate-magnesium potassium phosphate cementitious composite material under low-temperature. In: Construction and Building Materials, v. 202 (March 2019).
- (2017): Preparation of high-performance cementitious materials from industrial solid waste. In: Construction and Building Materials, v. 152 (October 2017).
Structurae cooperates with
