Tao Wang 
- (2024): Damage of interface between slab track bases and cable-stayed bridge under train load based on fatigue cohesion model. In: Engineering Failure Analysis, v. 161 (July 2024).
- (2019): Compressive behaviours of novel SCS sandwich composite walls with normal weight concrete. In: Thin-Walled Structures, v. 141 (August 2019).
- : Damage detection of thin plates by fusing variational mode decomposition and spectral entropy. In: Structural Health Monitoring.
- (2023): Cyclic test evaluation of double skin composite hybrid coupled wall with frictional steel truss coupling beams. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Characteristics of the alkali-silica reaction in seawater and sea sand concrete with different water-cement ratios. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): DEM Analysis of Dynamic Evolutions of Lateral Soil Arching in Sandy Soil. In: Journal of Engineering Mechanics (ASCE), v. 149, n. 6 (June 2023).
- (2023): Damage identification of thin plate-like structures combining improved singular spectrum analysis and multiscale cross-sample entropy (ISSA-MCSEn). In: Smart Materials and Structures, v. 32, n. 3 (1 February 2023).
- (2022): Cyclic tests on steel truss-embedded steel plate-concrete composite walls. In: Structures, v. 46 (December 2022).
- (2022): Deformation Characteristics and Optimization Design for Large-Scale Deep and Circular Foundation Pit Partitioned Excavation in a Complex Environment. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Cyclic shear behavior and strength capacity of prestressed concrete walls in high-rise buildings. In: Engineering Structures, v. 266 (September 2022).
- (2022): Decision-Making Based on Network Analyses of New Infrastructure Layouts. In: Buildings, v. 12, n. 7 (5 July 2022).
- (2021): Convergence deformation monitoring of a shield tunnel based on flexible long-gauge FBG sensors. In: Mechanics of Advanced Materials and Structures, v. 29, n. 19 (March 2021).
- (2021): Corrosion features and time-dependent corrosion model of Galfan coating of high strength steel wires. In: Construction and Building Materials, v. 313 (December 2021).
- (2019): Creep Characteristics and Model of Key Unit Rock in Slope Potential Slip Surface. In: International Journal of Geomechanics, v. 19, n. 8 (August 2019).
- (2020): Correlation of Physicochemical Characteristics of CoOx Supported by a CeO2 Nanorod with NO Removal by CO. In: Journal of Environmental Engineering (ASCE), v. 146, n. 1 (January 2020).
- (2021): Cyclic tests on concrete-filled composite plate shear walls with enhanced C-channels. In: Journal of Constructional Steel Research, v. 179 (April 2021).
- (2020): Concession period optimisation in complex projects under uncertainty: a public–private partnership perspective. In: Construction Management and Economics, v. 39, n. 2 (October 2020).
- (2021): A comparative study of statistical methods for critical parameters at tempered glass fallout in an enclosure fire. In: Construction and Building Materials, v. 266 (January 2021).
- (2020): Design and modeling of a hydraulic soft actuator with three degrees of freedom. In: Smart Materials and Structures, v. 29, n. 12 (30 October 2020).
- (2020): Compressive behaviours of steel-UHPC-steel sandwich composite walls using novel EC connectors. In: Journal of Constructional Steel Research, v. 173 (October 2020).
- (2020): Characterizing asphalt aging behaviors and rheological properties based on spectrophotometry. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Compressive behaviours of circular concrete-filled steel tubes exposed to low-temperature environment. In: Construction and Building Materials, v. 245 (June 2020).
- (2018): Compressive behaviour of normal weight concrete confined by the steel face plates in SCS sandwich wall. In: Construction and Building Materials, v. 171 (May 2018).
- (2020): Cyclic tests on novel steel-concrete-steel sandwich shear walls with boundary CFST columns. In: Journal of Constructional Steel Research, v. 164 (January 2020).
- (2019): Compressive behaviours of steel-concrete-steel sandwich walls with J-hooks at low temperatures. In: Construction and Building Materials, v. 207 (May 2019).
- (2015): Core Dimensions of the Construction Safety Climate for a Standardized Safety-Climate Measurement. In: Journal of Construction Engineering and Management, v. 141, n. 8 (August 2015).
- (2008): Collapse simulation of a four-story steel moment frame by a distributed online hybrid test. In: Earthquake Engineering and Structural Dynamics, v. 37, n. 6 (May 2008).
- (2017): Cyclic loading test of double K-braced reinforced concrete frame subassemblies with buckling restrained braces. In: Engineering Structures, v. 139 (May 2017).
- (2006): Creep Buckling of Shallow Parabolic Concrete Arches. In: Journal of Structural Engineering (ASCE), v. 132, n. 10 (October 2006).
- (2018): Comparison of Local Load Influence on Crack Evolution of Coal and Briquette Coal Samples. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
