Siqi Wang 
- (2024): Experimental study and numerical model of a new passive adaptive isolation bearing. In: Engineering Structures, v. 308 (June 2024).
- (2024): Multiscale analysis of recycled coarse aggregate concrete under the synergistic action of KH560 and PVA fibers. In: Construction and Building Materials, v. 419 (March 2024).
- (2024): Removal of the GPR antenna vibration effect through height shifting correction for enhanced multi-layer asphalt pavement thickness determination. In: Automation in Construction, v. 161 (May 2024).
- (2024): Improving the performance of prefabricated houses through multi-objective optimization design. In: Journal of Building Engineering, v. 84 (May 2024).
- (2024): Mechanical Behaviors and Structure Safety of a Tunnel Crossing a Water-Rich Fault Fracture Zone—A Case Study. In: Buildings, v. 14, n. 2 (1 February 2024).
- (2023): Effects of structural symmetry of introduced polyether diol on low temperature tolerance of laminated polyurethane bearings in bridges. In: Construction and Building Materials, v. 400 (October 2023).
- (2024): Seaport Hazardous Cargo Loading and Unloading Risk Assessment Using Interval Type-2 Fuzzy Sets and Bayesian Networks. In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, v. 10, n. 1 (March 2024).
- (2024): Buckling optimization of variable-stiffness composite plates via variable stiffness optimization algorithm. In: Composite Structures, v. 327 (January 2024).
- (2024): Effect of Water Immersion on the Seismic Isolation Performance of Castable Polyurethane Bearing. In: Construction and Building Materials, v. 412 (January 2024).
- (2023): Experimental Study and Numerical Simulation of the Effect of Rigid Pile Composite Foundations on Slab Culverts. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2024): Optimal design of tuned inerter negative stiffness dampers with linear viscous and nonlinear eddy current damping for structural effective damping ratio enhancement. In: Soil Dynamics and Earthquake Engineering, v. 176 (January 2024).
- (2023): Modification mechanism of flue gas desulfurization gypsum on fly ash and ground granulated blast-furnace slag alkali-activated materials: Promoting green cementitious material. In: Construction and Building Materials, v. 396 (September 2023).
- (2023): Buckling analysis and optimization of variable angle tow composite plates via Ritz method and variable stiffness optimization. In: Computers & Structures, v. 289 (December 2023).
- (2023): Rapid extraction of pavement aggregate gradation based on point clouds using deep learning networks. In: Automation in Construction, v. 154 (October 2023).
- (2023): PVA fiber/cement-based interface in silane coupler KH560 reinforced high performance concrete – Experimental and molecular dynamics study. In: Construction and Building Materials, v. 395 (September 2023).
- (2023): Efficacy of 3M-PTGL on low-temperature seismic performance of polyurethane elastomeric bearings for bridges. In: Engineering Structures, v. 294 (November 2023).
- (2023): End-to-end BIM-based optimization for dual-objective road alignment design with driving safety and construction cost efficiency. In: Automation in Construction, v. 151 (July 2023).
- (2023): An Improved Multistage Creep Recovery Test Procedure for Viscoelastic-Plastic Damage Model Calibration. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 4 (April 2023).
- (2022): Automatic asphalt layer interface detection and thickness determination from ground-penetrating radar data. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Asphalt pavement density measurement using non-destructive testing methods: current practices, challenges, and future vision. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): A silanized MCNT/TPU-based flexible strain sensor with high stretchability for deformation monitoring of elastomeric isolators for bridges. In: Construction and Building Materials, v. 338 (July 2022).
- (2021): Time-dependent robustness-based condition assessment of RC bridges subjected to corrosion. In: Structures, v. 34 (December 2021).
- (2017): The role of justice for cooperation and contract’s moderating effect in construction dispute negotiation. In: Engineering, Construction and Architectural Management, v. 24, n. 1 (January 2017).
- (2020): Experimental study on mechanical properties of casting high-capacity polyurethane elastomeric bearings. In: Construction and Building Materials, v. 265 (December 2020).
- (2019): Resolving Construction Disputes through Mediation within Arbitration Proceedings in China. In: International Journal of Architecture Engineering and Construction, v. 8, n. 1 (March 2019).
- (2020): Mechanical performance and shear constitutive model study of a new high-capacity polyurethane elastomeric bearing. In: Construction and Building Materials, v. 232 (January 2020).
- (2017): Laboratory Investigation of Crumb Rubber Modified Asphalt Binder and Mixtures with Warm-Mix Additives. In: International Journal of Civil Engineering, v. 15, n. 2 (January 2017).
- (2016): Evaluating the rutting resistance of asphalt mixtures using a simplified triaxial repeated load test. In: Construction and Building Materials, v. 116 (July 2016).
- (2010): The composite MRE embedded with a copper coil. In: Smart Materials and Structures, v. 19, n. 6 (June 2010).
- (2014): A new energy-harvesting device system for wireless sensors, adaptable to on-site monitoring of MR damper motion. In: Smart Materials and Structures, v. 23, n. 7 (July 2014).
Structurae cooperates with
