Linbing Wang 
- (2024): Evaluating thermal activated coal gangue as alternative filler in asphalt binder using rheological experiments and molecular dynamic simulation. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): An experimental characterization of the properties of graphene oxide—Waterborne epoxy resin coating of concrete after chloride erosion. In: Construction and Building Materials, v. 428 (May 2024).
- (2023): Involving prediction of dynamic modulus in asphalt mix design with machine learning and mechanical-empirical analysis. In: Construction and Building Materials, v. 407 (December 2023).
- (2023): Exploring the effect of different waste polypropylene matrix composites on service performance of modified asphalt using analytic hierarchy process. In: Construction and Building Materials, v. 405 (November 2023).
- (2023): Implementation of ensemble Artificial Neural Network and MEMS wireless sensors for In-Situ asphalt mixture dynamic modulus prediction. In: Construction and Building Materials, v. 377 (May 2023).
- (2022): The Effect of Microbiologically Induced Concrete Corrosion in Sewer on the Bearing Capacity of Reinforced Concrete Pipes: Full-Scale Experimental Investigation. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2022): Improving asphalt mix design considering international roughness index of asphalt pavement predicted using autoencoders and machine learning. In: Construction and Building Materials, v. 360 (December 2022).
- (2023): Effect of grain size composition on mechanical performance requirement for particles in aggregate blend based on photoelastic method. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Fractal Analysis of Tunnel Structural Damage Caused by High-Temperature and Explosion Impact. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Improving asphalt mix design by predicting alligator cracking and longitudinal cracking based on machine learning and dimensionality reduction techniques. In: Construction and Building Materials, v. 354 (November 2022).
- (2022): Evaluation on the influence of dynamic water pressure environment on viscoelastic mechanical performance of asphalt mixture using the bending beam rheometer method. In: Construction and Building Materials, v. 321 (February 2022).
- (2010): Integration of GIS and Data Mining Technology to Enhance the Pavement Management Decision Making. In: Journal of Transportation Engineering, v. 136, n. 4 (April 2010).
- (2020): Investigation of the force evolution in aggregate blend compaction process and the effect of elongated and flat particles using DEM. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Evaluation of physicochemical interaction between asphalt binder and mineral filler through interfacial adsorbed film thickness. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Effects of Crack Damage on Acceleration Response of Asphalt Pavement via Numerical Analysis. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 7 (July 2020).
- (2020): Evaluation on moisture sensitivity induced by dynamic pore water pressure for asphalt mixture and its components using the bending beam rheometer method. In: Construction and Building Materials, v. 251 (August 2020).
- (2018): Effect of temperature on deformation properties of unbound granular materials containing fine RAP. In: Construction and Building Materials, v. 169 (April 2018).
- (2011): Finite-Element Analysis of Chemical Transport and Reinforcement Corrosion-Induced Cracking in Variably Saturated Heterogeneous Concrete. In: Journal of Engineering Mechanics (ASCE), v. 137, n. 5 (May 2011).
- (2019): Investigation on Self-Healing Behavior of Asphalt Binder Using a Six-Fraction Molecular Model. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 5 (May 2019).
- (2015): Investigation of the Asphalt Self-Healing Mechanism Using a Phase-Field Model. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 3 (March 2015).
- (2016): Evaluation of Moisture Susceptibility of High-Porosity ATPB Drainage Layer Materials Using Modified Dynamic Modulus Test. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 10 (October 2016).
- (2013): Integrated Experimental and Numerical Study on Permanent Deformation of Asphalt Pavement at Intersections. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 7 (July 2013).
- (2016): Effect of temperature on resilient modulus and shear strength of unbound granular materials containing fine RAP. In: Construction and Building Materials, v. 124 (October 2016).
- (2017): An investigation on the aggregate-shape embedded piezoelectric sensor for civil infrastructure health monitoring. In: Construction and Building Materials, v. 131 (January 2017).
- (2017): Experimental investigation of the relationship between mineral content and aggregate morphological characteristics using the improved FTI system and XRD method. In: Construction and Building Materials, v. 155 (November 2017).
- (2017): Influence of foaming effect, operation time and health preserving properties of foam epoxy asphalt mixtures. In: Construction and Building Materials, v. 151 (October 2017).
- (2017): Improvement of evaluation indicator of interfacial interaction between asphalt binder and mineral fillers. In: Construction and Building Materials, v. 151 (October 2017).
- (2015): Fracture failure in crack interaction of asphalt binder by using a phase field approach. In: Materials and Structures, v. 48, n. 9 (September 2015).
- (2018): Investigating the Pavement Vibration Response for Roadway Service Condition Evaluation. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Influence of Paraffin on the Microproperties of Asphalt Binder Using MD Simulation. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 8 (August 2018).
Structurae cooperates with
